README: mention "transport select" in quickstart section

[openocd.git] / README

diff --git a/README b/README
index dffa4886291087b0346fbb19aa0ee8b997998c37..6a32c9e715d3a586314bd297af60ce40fb7c8421 100644 (file)
--- a/README
+++ b/README
@@ -39,7 +39,11 @@ If you are connecting a particular adapter with some specific target,
 you need to source both the jtag interface and the target configs,
 e.g.:
 
-  openocd -f interface/ftdi/jtagkey2.cfg -f target/ti_calypso.cfg
+  openocd -f interface/ftdi/jtagkey2.cfg -c "transport select jtag" \
+          -f target/ti_calypso.cfg
+
+  openocd -f interface/stlink-v2-1.cfg -c "transport select hla_swd" \
+          -f target/stm32l0.cfg
 
 NB: when using an FTDI-based adapter you should prefer configs in the
 ftdi directory; the old configs for the ft2232 are deprecated.
@@ -101,13 +105,13 @@ JTAG adapters
 -------------
 
 AICE, ARM-JTAG-EW, ARM-USB-OCD, ARM-USB-TINY, AT91RM9200, axm0432,
-BCM2835, Bus Blaster, Buspirate, Chameleon, Cortino, DENX, DLC 5,
-DLP-USB1232H, embedded projects, eStick, FlashLINK, FlossJTAG,
-Flyswatter, Flyswatter2, Gateworks, Hoegl, ICDI, ICEBear, J-Link,
-JTAG VPI, JTAGkey, JTAGkey2, JTAG-lock-pick, KT-Link, Lisa/L,
-LPC1768-Stick, MiniModule, NGX, NXHX, OOCDLink, Opendous, OpenJTAG,
-Openmoko, OpenRD, OSBDM, Presto, Redbee, RLink, SheevaPlug devkit,
-Stellaris evkits, ST-LINK (SWO tracing supported),
+BCM2835, Bus Blaster, Buspirate, Chameleon, CMSIS-DAP, Cortino, DENX,
+Digilent JTAG-SMT2, DLC 5, DLP-USB1232H, embedded projects, eStick,
+FlashLINK, FlossJTAG, Flyswatter, Flyswatter2, Gateworks, Hoegl, ICDI,
+ICEBear, J-Link, JTAG VPI, JTAGkey, JTAGkey2, JTAG-lock-pick, KT-Link,
+Lisa/L, LPC1768-Stick, MiniModule, NGX, NXHX, OOCDLink, Opendous,
+OpenJTAG, Openmoko, OpenRD, OSBDM, Presto, Redbee, RLink, SheevaPlug
+devkit, Stellaris evkits, ST-LINK (SWO tracing supported),
 STM32-PerformanceStick, STR9-comStick, sysfsgpio, TUMPA, Turtelizer,
 ULINK, USB-A9260, USB-Blaster, USB-JTAG, USBprog, VPACLink, VSLLink,
 Wiggler, XDS100v2, Xverve.
@@ -117,14 +121,14 @@ Debug targets
 
 ARM11, ARM7, ARM9, AVR32, Cortex-A, Cortex-R, Cortex-M,
 Feroceon/Dragonite, DSP563xx, DSP5680xx, FA526, MIPS EJTAG, NDS32,
-XScale.
+XScale, Intel Quark.
 
 Flash drivers
 -------------
 
 ADUC702x, AT91SAM, AVR, CFI, DSP5680xx, EFM32, EM357, FM3, Kinetis,
-LPC2000, LPC2900, LPCSPIFI, Milandr, NuMicro, PIC32mx, Stellaris,
-STM32, STMSMI, STR7x, STR9x; NAND controllers of AT91SAM9, LPC3180,
+LPC2000, LPC2900, LPCSPIFI, Milandr, NuMicro, PIC32mx, PSoC4, Stellaris,
+STM32, STMSMI, STR7x, STR9x, nRF51; NAND controllers of AT91SAM9, LPC3180,
 LPC32xx, i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx, S3C6400.
 
 
@@ -215,7 +219,7 @@ You'll also need:
 
 Additionally, for building from git:
 
-- autoconf >= 2.59
+- autoconf >= 2.64
 - automake >= 1.9
 - texinfo
 
@@ -229,14 +233,16 @@ drivers need either one of:
   - ftd2xx: http://www.ftdichip.com/Drivers/D2XX.htm (proprietary,
     GPL-incompatible)
 
+CMSIS-DAP support needs HIDAPI library.
+
 Permissions delegation
 ----------------------
 
 Running OpenOCD with root/administrative permissions is strongly
 discouraged for security reasons.
 
-For USB devices on GNU/Linux you should use the contrib/openocd.udev
-rules file. It probably belongs somewhere in /etc/udev/rules.d, but
+For USB devices on GNU/Linux you should use the contrib/99-openocd.rules
+file. It probably belongs somewhere in /etc/udev/rules.d, but
 consult your operating system documentation to be sure. Do not forget
 to add yourself to the "plugdev" group.