you need to source both the jtag interface and the target configs,
e.g.:
- openocd -f interface/ftdi/jtagkey2.cfg -f target/ti_calypso.cfg
+ openocd -f interface/ftdi/jtagkey2.cfg -c "transport select jtag" \
+ -f target/ti_calypso.cfg
+
+ openocd -f interface/stlink-v2-1.cfg -c "transport select hla_swd" \
+ -f target/stm32l0.cfg
NB: when using an FTDI-based adapter you should prefer configs in the
ftdi directory; the old configs for the ft2232 are deprecated.
viewed online at the following URLs:
OpenOCD User's Guide:
- http://openocd.sourceforge.net/doc/html/index.html
+ http://openocd.org/doc/html/index.html
OpenOCD Developer's Manual:
- http://openocd.sourceforge.net/doc/doxygen/html/index.html
+ http://openocd.org/doc/doxygen/html/index.html
These reflect the latest development versions, so the following section
introduces how to build the complete documentation from the package.
-------------
ADUC702x, AT91SAM, AVR, CFI, DSP5680xx, EFM32, EM357, FM3, Kinetis,
-LPC2000, LPC2900, LPCSPIFI, Milandr, NuMicro, PIC32mx, PSoC4, Stellaris,
-STM32, STMSMI, STR7x, STR9x, nRF51; NAND controllers of AT91SAM9, LPC3180,
-LPC32xx, i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx, S3C6400.
+LPC8xx/LPC1xxx/LPC2xxx/LPC541xx, LPC2900, LPCSPIFI, Marvell QSPI,
+Milandr, NIIET, NuMicro, PIC32mx, PSoC4, SiM3x, Stellaris, STM32, STMSMI,
+STR7x, STR9x, nRF51; NAND controllers of AT91SAM9, LPC3180, LPC32xx,
+i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx, S3C6400, XMC4xxx.
==================