Code Review / openocd.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | review | tree
raw | inline | side by side
semihosting: fix accessing memory outside the bounds of the fn array
[openocd.git] / configure.ac
diff --git a/configure.ac b/configure.ac
index 139598e159e5dd5fdd0674ed871eaed04f46da23..7eada3a32e0aa19875a8fa716fb615c316a76d39 100644 (file)
--- a/configure.ac
+++ b/configure.ac
@@ -2,7 +2,7 @@ AC_PREREQ([2.69])
 AC_INIT([openocd], [0.11.0+dev],
   [OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
 AC_CONFIG_SRCDIR([src/openocd.c])
-AC_CONFIG_AUX_DIR([.])
+AC_CONFIG_AUX_DIR([build-aux])
 
 m4_include([config_subdir.m4])dnl
 
@@ -122,8 +122,10 @@ m4_define([USB1_ADAPTERS],
        [[opendous], [eStick/opendous JTAG Programmer], [OPENDOUS]],
        [[armjtagew], [Olimex ARM-JTAG-EW Programmer], [ARMJTAGEW]],
        [[rlink], [Raisonance RLink JTAG Programmer], [RLINK]],
-       [[usbprog], [USBProg JTAG Programmer], [USBPROG]],
-       [[aice], [Andes JTAG Programmer], [AICE]]])
+       [[usbprog], [USBProg JTAG Programmer], [USBPROG]]])
+
+m4_define([DEPRECATED_USB1_ADAPTERS],
+       [[[aice], [Andes JTAG Programmer (deprecated)], [AICE]]])
 
 m4_define([HIDAPI_ADAPTERS],
        [[[cmsis_dap], [CMSIS-DAP Compliant Debugger], [CMSIS_DAP_HID]],
@@ -256,6 +258,8 @@ AC_ARG_ADAPTERS([
   LIBJAYLINK_ADAPTERS
   ],[auto])
 
+AC_ARG_ADAPTERS([DEPRECATED_USB1_ADAPTERS],[no])
+
 AC_ARG_ENABLE([parport],
   AS_HELP_STRING([--enable-parport], [Enable building the pc parallel port driver]),
   [build_parport=$enableval], [build_parport=no])
@@ -274,6 +278,10 @@ AC_ARG_ENABLE([jtag_vpi],
   AS_HELP_STRING([--enable-jtag_vpi], [Enable building support for JTAG VPI]),
   [build_jtag_vpi=$enableval], [build_jtag_vpi=no])
 
+AC_ARG_ENABLE([vdebug],
+  AS_HELP_STRING([--enable-vdebug], [Enable building support for Cadence Virtual Debug Interface]),
+  [build_vdebug=$enableval], [build_vdebug=no])
+
 AC_ARG_ENABLE([jtag_dpi],
   AS_HELP_STRING([--enable-jtag_dpi], [Enable building support for JTAG DPI]),
   [build_jtag_dpi=$enableval], [build_jtag_dpi=no])
@@ -290,10 +298,14 @@ AS_CASE(["${host_cpu}"],
     AC_ARG_ENABLE([imx_gpio],
       AS_HELP_STRING([--enable-imx_gpio], [Enable building support for bitbanging on NXP IMX processors]),
       [build_imx_gpio=$enableval], [build_imx_gpio=no])
+    AC_ARG_ENABLE([am335xgpio],
+      AS_HELP_STRING([--enable-am335xgpio], [Enable building support for bitbanging on AM335x (as found in Beaglebones)]),
+      [build_am335xgpio=$enableval], [build_am335xgpio=no])
   ],
   [
     build_bcm2835gpio=no
     build_imx_gpio=no
+    build_am335xgpio=no
 ])
 
 AS_CASE(["${host_cpu}"],
@@ -350,6 +362,10 @@ AC_ARG_ENABLE([internal-jimtcl],
   AS_HELP_STRING([--disable-internal-jimtcl], [Disable building internal jimtcl]),
   [use_internal_jimtcl=$enableval], [use_internal_jimtcl=yes])
 
+AC_ARG_ENABLE([jimtcl-maintainer],
+  AS_HELP_STRING([--enable-jimtcl-maintainer], [Enable maintainer mode when building internal jimtcl]),
+  [use_internal_jimtcl_maintainer=$enableval], [use_internal_jimtcl_maintainer=no])
+
 AC_ARG_ENABLE([internal-libjaylink],
   AS_HELP_STRING([--disable-internal-libjaylink],
   [Disable building internal libjaylink]),
@@ -495,6 +511,13 @@ AS_IF([test "x$build_imx_gpio" = "xyes"], [
   AC_DEFINE([BUILD_IMX_GPIO], [0], [0 if you don't want imx_gpio.])
 ])
 
+AS_IF([test "x$build_am335xgpio" = "xyes"], [
+  build_bitbang=yes
+  AC_DEFINE([BUILD_AM335XGPIO], [1], [1 if you want am335xgpio.])
+], [
+  AC_DEFINE([BUILD_AM335XGPIO], [0], [0 if you don't want am335xgpio.])
+])
+
 AS_IF([test "x$parport_use_ppdev" = "xyes"], [
   AC_DEFINE([PARPORT_USE_PPDEV], [1], [1 if you want parport to use ppdev.])
 ], [
@@ -513,6 +536,12 @@ AS_IF([test "x$build_jtag_vpi" = "xyes"], [
   AC_DEFINE([BUILD_JTAG_VPI], [0], [0 if you don't want JTAG VPI.])
 ])
 
+AS_IF([test "x$build_vdebug" = "xyes"], [
+  AC_DEFINE([BUILD_VDEBUG], [1], [1 if you want Cadence vdebug interface.])
+], [
+  AC_DEFINE([BUILD_VDEBUG], [0], [0 if you don't want Cadence vdebug interface.])
+])
+
 AS_IF([test "x$build_jtag_dpi" = "xyes"], [
   AC_DEFINE([BUILD_JTAG_DPI], [1], [1 if you want JTAG DPI.])
 ], [
@@ -540,7 +569,12 @@ AS_IF([test "x$enable_buspirate" != "xno"], [
 
 AS_IF([test "x$use_internal_jimtcl" = "xyes"], [
   AS_IF([test -f "$srcdir/jimtcl/configure.ac"], [
-    AX_CONFIG_SUBDIR_OPTION([jimtcl], [--disable-install-jim])
+    AS_IF([test "x$use_internal_jimtcl_maintainer" = "xyes"], [
+      jimtcl_config_options="--disable-install-jim --with-ext=json --maintainer"
+    ], [
+      jimtcl_config_options="--disable-install-jim --with-ext=json"
+    ])
+    AX_CONFIG_SUBDIR_OPTION([jimtcl], [$jimtcl_config_options])
   ], [
     AC_MSG_ERROR([jimtcl not found, run git submodule init and git submodule update.])
   ])
@@ -570,9 +604,6 @@ AS_IF([test "x$build_xlnx_pcie_xvc" = "xyes"], [
 PKG_CHECK_MODULES([LIBUSB1], [libusb-1.0], [
        use_libusb1=yes
        AC_DEFINE([HAVE_LIBUSB1], [1], [Define if you have libusb-1.x])
-       PKG_CHECK_EXISTS([libusb-1.0 >= 1.0.9],
-               [AC_DEFINE([HAVE_LIBUSB_ERROR_NAME], [1], [Define if your libusb has libusb_error_name()])],
-               [AC_MSG_WARN([libusb-1.x older than 1.0.9 detected, consider updating])])
        LIBUSB1_CFLAGS=`echo $LIBUSB1_CFLAGS | sed 's/-I/-isystem /'`
        AC_MSG_NOTICE([libusb-1.0 header bug workaround: LIBUSB1_CFLAGS changed to "$LIBUSB1_CFLAGS"])
        PKG_CHECK_EXISTS([libusb-1.0 >= 1.0.16],
@@ -644,6 +675,7 @@ m4_define([PROCESS_ADAPTERS], [
 ])
 
 PROCESS_ADAPTERS([USB1_ADAPTERS], ["x$use_libusb1" = "xyes"], [libusb-1.x])
+PROCESS_ADAPTERS([DEPRECATED_USB1_ADAPTERS], ["x$use_libusb1" = "xyes"], [libusb-1.x])
 PROCESS_ADAPTERS([HIDAPI_ADAPTERS], ["x$use_hidapi" = "xyes"], [hidapi])
 PROCESS_ADAPTERS([HIDAPI_USB1_ADAPTERS], ["x$use_hidapi" = "xyes" -a "x$use_libusb1" = "xyes"], [hidapi and libusb-1.x])
 PROCESS_ADAPTERS([LIBFTDI_ADAPTERS], ["x$use_libftdi" = "xyes"], [libftdi])
@@ -690,9 +722,11 @@ AM_CONDITIONAL([EP93XX], [test "x$build_ep93xx" = "xyes"])
 AM_CONDITIONAL([AT91RM9200], [test "x$build_at91rm9200" = "xyes"])
 AM_CONDITIONAL([BCM2835GPIO], [test "x$build_bcm2835gpio" = "xyes"])
 AM_CONDITIONAL([IMX_GPIO], [test "x$build_imx_gpio" = "xyes"])
+AM_CONDITIONAL([AM335XGPIO], [test "x$build_am335xgpio" = "xyes"])
 AM_CONDITIONAL([BITBANG], [test "x$build_bitbang" = "xyes"])
-AM_CONDITIONAL([JTAG_VPI], [test "x$build_jtag_vpi" = "xyes" -o "x$build_jtag_vpi" = "xyes"])
-AM_CONDITIONAL([JTAG_DPI], [test "x$build_jtag_dpi" = "xyes" -o "x$build_jtag_dpi" = "xyes"])
+AM_CONDITIONAL([JTAG_VPI], [test "x$build_jtag_vpi" = "xyes"])
+AM_CONDITIONAL([VDEBUG], [test "x$build_vdebug" = "xyes"])
+AM_CONDITIONAL([JTAG_DPI], [test "x$build_jtag_dpi" = "xyes"])
 AM_CONDITIONAL([USB_BLASTER_DRIVER], [test "x$enable_usb_blaster" != "xno" -o "x$enable_usb_blaster_2" != "xno"])
 AM_CONDITIONAL([AMTJTAGACCEL], [test "x$build_amtjtagaccel" = "xyes"])
 AM_CONDITIONAL([GW16012], [test "x$build_gw16012" = "xyes"])
@@ -758,6 +792,7 @@ AS_IF([test "x${gcc_wextra}" = "xyes"], [
   GCC_WARNINGS="${GCC_WARNINGS} -Wredundant-decls"
   GCC_WARNINGS="${GCC_WARNINGS} -Wpointer-arith"
   GCC_WARNINGS="${GCC_WARNINGS} -Wundef"
+  GCC_WARNINGS="${GCC_WARNINGS} -Wno-error=deprecated-declarations"
 ])
 AS_IF([test "x${gcc_werror}" = "xyes"], [
   GCC_WARNINGS="${GCC_WARNINGS} -Werror"
@@ -780,6 +815,7 @@ echo
 echo OpenOCD configuration summary
 echo --------------------------------------------------
 m4_foreach([adapter], [USB1_ADAPTERS,
+       DEPRECATED_USB1_ADAPTERS,
        HIDAPI_ADAPTERS, HIDAPI_USB1_ADAPTERS, LIBFTDI_ADAPTERS,
        LIBFTDI_USB1_ADAPTERS,
        LIBGPIOD_ADAPTERS,
Open On-Chip Debugger

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)