Code Review / openocd.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | review | tree
raw | inline | side by side
configure.ac: correct test for USB_BLASTER_DRIVER AM symbol
[openocd.git] / configure.ac
diff --git a/configure.ac b/configure.ac
index 17cf43edd560fa00d3012391ffbddfec7be4fc09..9943bebe9aec278ec01bca24a08c882c353b03c8 100644 (file)
--- a/configure.ac
+++ b/configure.ac
@@ -1,5 +1,5 @@
-AC_PREREQ(2.60)
-AC_INIT([openocd], [0.8.0-dev],
+AC_PREREQ(2.64)
+AC_INIT([openocd], [0.9.0-dev],
   [OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
 AC_CONFIG_SRCDIR([src/openocd.c])
 
@@ -194,7 +194,9 @@ m4_define([ADAPTER_OPT], [m4_translit(ADAPTER_ARG($1), [_], [-])])
 m4_define([USB1_ADAPTERS],
        [[[ftdi], [MPSSE mode of FTDI based devices], [FTDI]],
        [[stlink], [ST-Link JTAG Programmer], [HLADAPTER_STLINK]],
-       [[ti_icdi], [TI ICDI JTAG Programmer], [HLADAPTER_ICDI]]])
+       [[ti_icdi], [TI ICDI JTAG Programmer], [HLADAPTER_ICDI]],
+       [[ulink], [Keil ULINK JTAG Programmer], [ULINK]],
+       [[usb_blaster_2], [Altera USB-Blaster II Compatible], [USB_BLASTER_2]]])
 
 m4_define([USB_ADAPTERS],
        [[[jlink], [Segger J-Link JTAG Programmer], [JLINK]],
@@ -206,9 +208,11 @@ m4_define([USB0_ADAPTERS],
        [[[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]],
        [[usbprog], [USBProg JTAG Programmer], [USBPROG]],
        [[rlink], [Raisonance RLink JTAG Programmer], [RLINK]],
-       [[ulink], [Keil ULINK JTAG Programmer], [ULINK]],
        [[armjtagew], [Olimex ARM-JTAG-EW Programmer], [ARMJTAGEW]]])
 
+m4_define([HIDAPI_ADAPTERS],
+       [[[cmsis_dap], [CMSIS-DAP Compliant Debugger], [CMSIS_DAP]]])
+
 #========================================
 # FTD2XXX support comes in 4 forms.
 #    (1) win32 - via a zip file
@@ -367,7 +371,7 @@ m4_define([AC_ARG_ADAPTERS], [
   ])
 ])
 
-AC_ARG_ADAPTERS([USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS], [auto])
+AC_ARG_ADAPTERS([USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS, HIDAPI_ADAPTERS], [auto])
 
 AC_ARG_ENABLE([parport],
   AS_HELP_STRING([--enable-parport], [Enable building the pc parallel port driver]),
@@ -383,12 +387,24 @@ AC_ARG_ENABLE([parport_giveio],
       [Enable use of giveio for parport (for CygWin only)]),
     [parport_use_giveio=$enableval], [parport_use_giveio=])
 
-AC_ARG_ENABLE([ft2232_libftdi],
-  AS_HELP_STRING([--enable-ft2232_libftdi], [Enable building support for FT2232 based devices using the libftdi driver, opensource alternate of FTD2XX]),
+AC_ARG_ENABLE([ft2232_libftdi], [], [
+if test $enableval = yes; then
+  AC_MSG_ERROR([The ft2232 driver is deprecated, use --enable-ftdi to build its replacement, or force the old driver with --enable-legacy-ft2232_libftdi])
+fi
+])
+
+AC_ARG_ENABLE([ft2232_ftd2xx], [], [
+if test $enableval = yes; then
+  AC_MSG_ERROR([The ft2232 driver is deprecated, use --enable-ftdi to build its replacement, or force the old driver with --enable-legacy-ft2232_ftd2xx])
+fi
+])
+
+AC_ARG_ENABLE([legacy-ft2232_libftdi],
+  AS_HELP_STRING([--enable-legacy-ft2232_libftdi], [(DEPRECATED) Enable building support for FT2232 based devices using the libftdi library]),
   [build_ft2232_libftdi=$enableval], [build_ft2232_libftdi=no])
 
-AC_ARG_ENABLE([ft2232_ftd2xx],
-  AS_HELP_STRING([--enable-ft2232_ftd2xx], [Enable building support for FT2232 based devices using the FTD2XX driver from ftdichip.com]),
+AC_ARG_ENABLE([legacy-ft2232_ftd2xx],
+  AS_HELP_STRING([--enable-legacy-ft2232_ftd2xx], [(DEPRECATED) Enable building support for FT2232 based devices using the D2XX library from ftdichip.com]),
   [build_ft2232_ftd2xx=$enableval], [build_ft2232_ftd2xx=no])
 
 AC_ARG_ENABLE([jtag_vpi],
@@ -751,7 +767,7 @@ else
   AC_DEFINE([BUILD_BUSPIRATE], [0], [0 if you don't want the Buspirate JTAG driver.])
 fi
 
-if test "$use_internal_jimtcl" = yes; then
+if test $use_internal_jimtcl = yes; then
   if test -f "$srcdir/jimtcl/configure.ac"; then
     AX_CONFIG_SUBDIR_OPTION([jimtcl], [--disable-install-jim])
   else
@@ -908,7 +924,7 @@ if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_b
       ])
     AC_SEARCH_LIBS([FT_GetLibraryVersion],[ftd2xx],,[
         AC_MSG_ERROR([You appear to be missing the FTD2xx driver library.])
-      ],[])
+      ],[-lrt -lusb-1.0])
   fi
 fi
 fi # linux
@@ -998,20 +1014,30 @@ CFLAGS=$CFLAGS_SAVE
 fi
 
 if test $build_ft2232_libftdi = yes -o $build_usb_blaster_libftdi = yes -o \
-  $build_openjtag_ftdi = yes; then
-  # We assume: the package is preinstalled in the proper place
-  # these present as 2 libraries..
-  LIBS="$LIBS -lftdi -lusb"
+  $build_openjtag_ftdi = yes -o $build_presto_libftdi = yes; then
+
+  # we can have libftdi or libftdi1, so check it and use the latest one
+  PKG_CHECK_MODULES([LIBFTDI], [libftdi1], [use_libftdi=yes], [use_libftdi=no])
+  if test $use_libftdi = no; then
+       PKG_CHECK_MODULES([LIBFTDI], [libftdi], [use_libftdi=yes], [use_libftdi=no])
+  fi
+  if test $use_libftdi = no; then
+       AC_MSG_ERROR([The libftdi driver is not present on your system.])
+  fi
+
   #
   # Try to build a small program.
   AC_MSG_CHECKING([Build & Link with libftdi...])
 
   LDFLAGS_SAVE=$LDFLAGS
   CFLAGS_SAVE=$CFLAGS
+  LIBS_SAVE=$LIBS
   _LDFLAGS=`eval echo $LDFLAGS`
   _CFLAGS=`eval echo $CFLAGS`
+  _LIBS=`eval echo $LIBS`
   LDFLAGS=$_LDFLAGS
-  CFLAGS=$_CFLAGS
+  CFLAGS="$_CFLAGS $LIBFTDI_CFLAGS"
+  LIBS="$_LIBS $LIBFTDI_LIBS"
 
   AC_RUN_IFELSE([AC_LANG_PROGRAM([[
 #include <stdio.h>
@@ -1075,6 +1101,7 @@ enum ftdi_chip_type x = TYPE_232H;
   # Restore the 'unexpanded ldflags'
   LDFLAGS=$LDFLAGS_SAVE
   CFLAGS=$CFLAGS_SAVE
+  LIBS=$LIBS_SAVE
 fi
 
 PKG_CHECK_MODULES([LIBUSB1], [libusb-1.0], [
@@ -1083,6 +1110,8 @@ PKG_CHECK_MODULES([LIBUSB1], [libusb-1.0], [
        PKG_CHECK_EXISTS([libusb-1.0 >= 1.0.9],
                [AC_DEFINE([HAVE_LIBUSB_ERROR_NAME], [1], [Define if your libusb has libusb_error_name()])],
                [AC_MSG_WARN([libusb-1.x older than 1.0.9 detected, consider updating])])
+       LIBUSB1_CFLAGS=`echo $LIBUSB1_CFLAGS | sed 's/-I/-isystem /'`
+       AC_MSG_NOTICE([libusb-1.0 header bug workaround: LIBUSB1_CFLAGS changed to "$LIBUSB1_CFLAGS"])
   ], [
        use_libusb1=no
        AC_MSG_WARN([libusb-1.x not found, trying legacy libusb-0.1 as a fallback; consider installing libusb-1.x instead])
@@ -1090,6 +1119,15 @@ PKG_CHECK_MODULES([LIBUSB1], [libusb-1.0], [
 
 PKG_CHECK_MODULES([LIBUSB0], [libusb], [use_libusb0=yes], [use_libusb0=no])
 
+for hidapi_lib in hidapi hidapi-hidraw hidapi-libusb; do
+       PKG_CHECK_MODULES([HIDAPI],[$hidapi_lib],[
+               use_hidapi=yes
+               break
+       ],[
+               use_hidapi=no
+       ])
+done
+
 m4_define([PROCESS_ADAPTERS], [
   m4_foreach([adapter], [$1], [
        if test $2; then
@@ -1111,6 +1149,7 @@ m4_define([PROCESS_ADAPTERS], [
 PROCESS_ADAPTERS([USB1_ADAPTERS], [$use_libusb1 = yes], [libusb-1.x])
 PROCESS_ADAPTERS([USB_ADAPTERS], [$use_libusb1 = yes -o $use_libusb0 = yes], [libusb-1.x or libusb-0.1])
 PROCESS_ADAPTERS([USB0_ADAPTERS], [$use_libusb0 = yes], [libusb-0.1])
+PROCESS_ADAPTERS([HIDAPI_ADAPTERS], [$use_hidapi = yes], [hidapi])
 
 if test $enable_stlink != no -o $enable_ti_icdi != no; then
        AC_DEFINE([BUILD_HLADAPTER], [1], [1 if you want the High Level JTAG driver.])
@@ -1135,7 +1174,7 @@ AM_CONDITIONAL([FT2232_DRIVER], [test $build_ft2232_ftd2xx = yes -o $build_ft223
 AM_CONDITIONAL([USB_BLASTER_LIBFTDI], [test $build_usb_blaster_libftdi = yes])
 AM_CONDITIONAL([USB_BLASTER_FTD2XX], [test $build_usb_blaster_ftd2xx = yes])
 AM_CONDITIONAL([JTAG_VPI], [test $build_jtag_vpi = yes -o $build_jtag_vpi = yes])
-AM_CONDITIONAL([USB_BLASTER_DRIVER], [test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes])
+AM_CONDITIONAL([USB_BLASTER_DRIVER], [test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes -o $enable_usb_blaster_2 != no])
 AM_CONDITIONAL([AMTJTAGACCEL], [test $build_amtjtagaccel = yes])
 AM_CONDITIONAL([GW16012], [test $build_gw16012 = yes])
 AM_CONDITIONAL([PRESTO_LIBFTDI], [test $build_presto_libftdi = yes])
@@ -1152,6 +1191,7 @@ AM_CONDITIONAL([IS_MINGW], [test $is_mingw = yes])
 AM_CONDITIONAL([IS_WIN32], [test $is_win32 = yes])
 AM_CONDITIONAL([IS_DARWIN], [test $is_darwin = yes])
 AM_CONDITIONAL([BITQ], [test $build_bitq = yes])
+AM_CONDITIONAL([CMSIS_DAP], [test $use_hidapi = yes])
 
 AM_CONDITIONAL([MINIDRIVER], [test $build_minidriver = yes])
 AM_CONDITIONAL([MINIDRIVER_DUMMY], [test $build_minidriver_dummy = yes])
@@ -1259,6 +1299,7 @@ AC_CONFIG_FILES([
   src/jtag/hla/Makefile
   src/jtag/aice/Makefile
   src/transport/Makefile
+  src/target/openrisc/Makefile
   src/xsvf/Makefile
   src/svf/Makefile
   src/target/Makefile
@@ -1276,7 +1317,7 @@ echo
 echo
 echo OpenOCD configuration summary
 echo --------------------------------------------------
-m4_foreach([adapter], [USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS],
+m4_foreach([adapter], [USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS, HIDAPI_ADAPTERS],
        [echo -n m4_format(["%-40s"], ADAPTER_DESC([adapter]))
        case $ADAPTER_VAR([adapter]) in
                auto)
@@ -1291,3 +1332,12 @@ m4_foreach([adapter], [USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS],
        esac
 ])
 echo
+
+if test $build_ft2232_libftdi = yes -o $build_ft2232_ftd2xx = yes; then
+       if test $enable_ftdi = no; then
+               AC_MSG_WARN([Building the deprecated 'ft2232' adapter driver but not its replacement!])
+               AC_MSG_WARN([Please consider using --enable-ftdi instead.])
+       else
+               AC_MSG_WARN([Building the deprecated 'ft2232' adapter driver.])
+       fi
+fi
Open On-Chip Debugger

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)