Code Review / openocd.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | review | tree
raw | inline | side by side
target/cortex_m: simplify cortex_m_unset_breakpoint()
[openocd.git] / configure.ac
diff --git a/configure.ac b/configure.ac
index f25dbc5160a5f8c49a875668ef9a548065fe0000..d4338dfbd78d75e45715cd1bd35a7a4456adad04 100644 (file)
--- a/configure.ac
+++ b/configure.ac
@@ -1,5 +1,5 @@
 AC_PREREQ(2.64)
-AC_INIT([openocd], [0.10.0-dev],
+AC_INIT([openocd], [0.10.0+dev],
   [OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
 AC_CONFIG_SRCDIR([src/openocd.c])
 
@@ -57,6 +57,7 @@ AC_CHECK_HEADERS([sys/ioctl.h])
 AC_CHECK_HEADERS([sys/param.h])
 AC_CHECK_HEADERS([sys/select.h])
 AC_CHECK_HEADERS([sys/stat.h])
+AC_CHECK_HEADERS([sys/sysctl.h])
 AC_CHECK_HEADERS([sys/time.h])
 AC_CHECK_HEADERS([sys/types.h])
 AC_CHECK_HEADERS([unistd.h])
@@ -86,6 +87,7 @@ AC_CHECK_FUNCS([strnlen])
 AC_CHECK_FUNCS([gettimeofday])
 AC_CHECK_FUNCS([usleep])
 AC_CHECK_FUNCS([vasprintf])
+AC_CHECK_FUNCS([realpath])
 
 # guess-rev.sh only exists in the repository, not in the released archives
 AC_MSG_CHECKING([whether to build a release])
@@ -112,7 +114,9 @@ m4_define([USB1_ADAPTERS],
        [[ti_icdi], [TI ICDI JTAG Programmer], [HLADAPTER_ICDI]],
        [[ulink], [Keil ULINK JTAG Programmer], [ULINK]],
        [[usb_blaster_2], [Altera USB-Blaster II Compatible], [USB_BLASTER_2]],
-       [[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]]])
+       [[ft232r], [Bitbang mode of FT232R based devices], [FT232R]],
+       [[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]],
+       [[xds110], [TI XDS110 Debug Probe], [XDS110]]])
 
 m4_define([USB_ADAPTERS],
        [[[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]],
@@ -127,6 +131,9 @@ m4_define([USB0_ADAPTERS],
 m4_define([HIDAPI_ADAPTERS],
        [[[cmsis_dap], [CMSIS-DAP Compliant Debugger], [CMSIS_DAP]]])
 
+m4_define([HIDAPI_USB1_ADAPTERS],
+       [[[kitprog], [Cypress KitProg Programmer], [KITPROG]]])
+
 m4_define([LIBFTDI_ADAPTERS],
        [[[usb_blaster], [Altera USB-Blaster Compatible], [USB_BLASTER]],
        [[presto], [ASIX Presto Adapter], [PRESTO]],
@@ -241,6 +248,7 @@ AC_ARG_ADAPTERS([
   USB_ADAPTERS,
   USB0_ADAPTERS,
   HIDAPI_ADAPTERS,
+  HIDAPI_USB1_ADAPTERS,
   LIBFTDI_ADAPTERS,
   LIBJAYLINK_ADAPTERS
   ],[auto])
@@ -292,11 +300,15 @@ AS_CASE(["${host_cpu}"],
     AC_ARG_ENABLE([bcm2835gpio],
       AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]),
       [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no])
+    AC_ARG_ENABLE([imx_gpio],
+      AS_HELP_STRING([--enable-imx_gpio], [Enable building support for bitbanging on NXP IMX processors]),
+      [build_imx_gpio=$enableval], [build_imx_gpio=no])
   ],
   [
     build_ep93xx=no
     build_at91rm9200=no
     build_bcm2835gpio=no
+    build_imx_gpio=no
 ])
 
 AC_ARG_ENABLE([gw16012],
@@ -316,6 +328,14 @@ AC_ARG_ENABLE([sysfsgpio],
   AS_HELP_STRING([--enable-sysfsgpio], [Enable building support for programming driven via sysfs gpios.]),
   [build_sysfsgpio=$enableval], [build_sysfsgpio=no])
 
+AS_CASE([$host_os],
+  [linux*], [],
+  [
+    AS_IF([test "x$build_sysfsgpio" = "xyes"], [
+      AC_MSG_ERROR([sysfsgpio is only available on linux])
+    ])
+])
+
 AC_ARG_ENABLE([minidriver_dummy],
   AS_HELP_STRING([--enable-minidriver-dummy], [Enable the dummy minidriver.]),
   [build_minidriver_dummy=$enableval], [build_minidriver_dummy=no])
@@ -329,6 +349,10 @@ AC_ARG_ENABLE([internal-libjaylink],
   [Disable building internal libjaylink]),
   [use_internal_libjaylink=$enableval], [use_internal_libjaylink=yes])
 
+AC_ARG_ENABLE([target64],
+  AS_HELP_STRING([--disable-target64], [Disable 64-bit target address]),
+    [build_target64=$enableval], [build_target64=yes])
+
 build_minidriver=no
 AC_MSG_CHECKING([whether to enable ZY1000 minidriver])
 AS_IF([test "x$build_zy1000" = "xyes"], [
@@ -498,6 +522,13 @@ AS_IF([test "x$build_bcm2835gpio" = "xyes"], [
   AC_DEFINE([BUILD_BCM2835GPIO], [0], [0 if you don't want bcm2835gpio.])
 ])
 
+AS_IF([test "x$build_imx_gpio" = "xyes"], [
+  build_bitbang=yes
+  AC_DEFINE([BUILD_IMX_GPIO], [1], [1 if you want imx_gpio.])
+], [
+  AC_DEFINE([BUILD_IMX_GPIO], [0], [0 if you don't want imx_gpio.])
+])
+
 AS_IF([test "x$parport_use_ppdev" = "xyes"], [
   AC_DEFINE([PARPORT_USE_PPDEV], [1], [1 if you want parport to use ppdev.])
 ], [
@@ -562,6 +593,13 @@ AS_IF([test "x$build_sysfsgpio" = "xyes"], [
   AC_DEFINE([BUILD_SYSFSGPIO], [0], [0 if you don't want SysfsGPIO driver.])
 ])
 
+AS_IF([test "x$build_target64" = "xyes"], [
+  AC_DEFINE([BUILD_TARGET64], [1], [1 if you want 64-bit addresses.])
+], [
+  AC_DEFINE([BUILD_TARGET64], [0], [0 if you don't want 64-bit addresses.])
+])
+
+
 PKG_CHECK_MODULES([LIBUSB1], [libusb-1.0], [
        use_libusb1=yes
        AC_DEFINE([HAVE_LIBUSB1], [1], [Define if you have libusb-1.x])
@@ -592,11 +630,14 @@ PKG_CHECK_MODULES([LIBFTDI], [libftdi1], [use_libftdi=yes], [
        PKG_CHECK_MODULES([LIBFTDI], [libftdi], [use_libftdi=yes], [use_libftdi=no])
 ])
 
-PKG_CHECK_MODULES([LIBJAYLINK], [libjaylink >= 0.1],
+PKG_CHECK_MODULES([LIBJAYLINK], [libjaylink >= 0.2],
        [use_libjaylink=yes], [use_libjaylink=no])
 
 m4_define([PROCESS_ADAPTERS], [
   m4_foreach([adapter], [$1], [
+       AS_IF([test "x$build_zy1000" = "xyes"], [
+               ADAPTER_VAR([adapter])=no
+       ])
        AS_IF([test $2], [
                AS_IF([test "x$ADAPTER_VAR([adapter])" != "xno"], [
                        AC_DEFINE([BUILD_]ADAPTER_SYM([adapter]), [1], [1 if you want the ]ADAPTER_DESC([adapter]).)
@@ -617,8 +658,9 @@ PROCESS_ADAPTERS([USB1_ADAPTERS], ["x$use_libusb1" = "xyes"], [libusb-1.x])
 PROCESS_ADAPTERS([USB_ADAPTERS], ["x$use_libusb1" = "xyes" -o "x$use_libusb0" = "xyes"], [libusb-1.x or libusb-0.1])
 PROCESS_ADAPTERS([USB0_ADAPTERS], ["x$use_libusb0" = "xyes"], [libusb-0.1])
 PROCESS_ADAPTERS([HIDAPI_ADAPTERS], ["x$use_hidapi" = "xyes"], [hidapi])
+PROCESS_ADAPTERS([HIDAPI_USB1_ADAPTERS], ["x$use_hidapi" = "xyes" -a "x$use_libusb1" = "xyes"], [hidapi and libusb-1.x])
 PROCESS_ADAPTERS([LIBFTDI_ADAPTERS], ["x$use_libftdi" = "xyes"], [libftdi])
-PROCESS_ADAPTERS([LIBJAYLINK_ADAPTERS], ["x$use_libusb1" = "xyes" -a "x$use_internal_libjaylink" = "xyes" -o "x$use_libjaylink" = "xyes"], [libusb-1.x or libjaylink-0.1])
+PROCESS_ADAPTERS([LIBJAYLINK_ADAPTERS], ["x$use_internal_libjaylink" = "xyes" -o "x$use_libjaylink" = "xyes"], [libjaylink-0.2])
 
 AS_IF([test "x$build_openjtag" = "xyes"], [
   AS_IF([test "x$use_libusb1" != "xyes" -a "x$use_libusb0" != "xyes"], [
@@ -660,6 +702,7 @@ AM_CONDITIONAL([ZY1000_MASTER], [test "x$build_zy1000_master" = "xyes"])
 AM_CONDITIONAL([IOUTIL], [test "x$build_ioutil" = "xyes"])
 AM_CONDITIONAL([AT91RM9200], [test "x$build_at91rm9200" = "xyes"])
 AM_CONDITIONAL([BCM2835GPIO], [test "x$build_bcm2835gpio" = "xyes"])
+AM_CONDITIONAL([IMX_GPIO], [test "x$build_imx_gpio" = "xyes"])
 AM_CONDITIONAL([BITBANG], [test "x$build_bitbang" = "xyes"])
 AM_CONDITIONAL([JTAG_VPI], [test "x$build_jtag_vpi" = "xyes" -o "x$build_jtag_vpi" = "xyes"])
 AM_CONDITIONAL([USB_BLASTER_DRIVER], [test "x$enable_usb_blaster" != "xno" -o "x$enable_usb_blaster_2" != "xno"])
@@ -679,6 +722,7 @@ AM_CONDITIONAL([BITQ], [test "x$build_bitq" = "xyes"])
 AM_CONDITIONAL([USE_LIBFTDI], [test "x$use_libftdi" = "xyes"])
 AM_CONDITIONAL([USE_HIDAPI], [test "x$use_hidapi" = "xyes"])
 AM_CONDITIONAL([USE_LIBJAYLINK], [test "x$use_libjaylink" = "xyes"])
+AM_CONDITIONAL([TARGET64], [test "x$build_target64" = "xyes"])
 
 AM_CONDITIONAL([MINIDRIVER], [test "x$build_minidriver" = "xyes"])
 AM_CONDITIONAL([MINIDRIVER_DUMMY], [test "x$build_minidriver_dummy" = "xyes"])
@@ -746,7 +790,8 @@ echo
 echo OpenOCD configuration summary
 echo --------------------------------------------------
 m4_foreach([adapter], [USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS,
-       HIDAPI_ADAPTERS, LIBFTDI_ADAPTERS, LIBJAYLINK_ADAPTERS],
+       HIDAPI_ADAPTERS, HIDAPI_USB1_ADAPTERS, LIBFTDI_ADAPTERS,
+       LIBJAYLINK_ADAPTERS],
        [s=m4_format(["%-40s"], ADAPTER_DESC([adapter]))
        AS_CASE([$ADAPTER_VAR([adapter])],
                [auto], [
@@ -760,3 +805,26 @@ m4_foreach([adapter], [USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS,
        ])
 ])
 echo
+
+AS_IF([test "x$build_oocd_trace" = "xyes"], [
+  echo 'WARNING! Deprecated configure option (--enable-oocd_trace)'
+  echo 'The oocd_trace driver is deprecated and will be removed in the next release.'
+  echo 'If you regularly use this driver, please report to the OpenOCD Mailing List.'
+  echo
+])
+
+AS_IF([test "x$build_zy1000" = "xyes" -o "x$build_zy1000_master" = "xyes"], [
+  echo 'WARNING! Deprecated configure option (--enable-zy1000, --enable-zy1000-master)'
+  echo 'Support for the ZY1000 platform is deprecated and will be removed in the next'
+  echo 'release. If you regularly use this platform, please report to the OpenOCD'
+  echo 'Mailing List.'
+  echo
+])
+
+AS_IF([test "x$build_ioutil" = "xyes"], [
+  echo 'WARNING! Deprecated configure option (--enable-ioutil)'
+  echo 'Support for the ioutil functions is deprecated and will be removed in the next'
+  echo 'release. If you regularly depend on this functionality, please report to the'
+  echo 'OpenOCD Mailing List.'
+  echo
+])
Open On-Chip Debugger

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)