If you disable all access through TCP/IP, you will need to
use the command line @option{-pipe} option.
+@anchor{gdb_port}
@deffn {Command} gdb_port [number]
@cindex GDB server
Normally gdb listens to a TCP/IP port, but GDB can also
second target will listen on gdb_port + 1, and so on.
When not specified during the configuration stage,
the port @var{number} defaults to 3333.
+When @var{number} is not a numeric value, incrementing it to compute
+the next port number does not work. In this case, specify the proper
+@var{number} for each target by using the option @code{-gdb-port} of the
+commands @command{target create} or @command{$target_name configure}.
+@xref{gdbportoverride,,option -gdb-port}.
Note: when using "gdb_port pipe", increasing the default remote timeout in
gdb (with 'set remotetimeout') is recommended. An insufficient timeout may
cause initialization to fail with "Unknown remote qXfer reply: OK".
-
@end deffn
@deffn {Command} tcl_port [number]
Select AP @var{num}, defaulting to 0.
@end deffn
+@deffn Command {$dap_name dpreg} reg [value]
+Displays the content of DP register at address @var{reg}, or set it to a new
+value @var{value}.
+
+In case of SWD, @var{reg} is a value in packed format
+@math{dpbanksel << 4 | addr} and assumes values 0, 4, 8 ... 0xfc.
+In case of JTAG it only assumes values 0, 4, 8 and 0xc.
+
+@emph{Note:} Consider using @command{poll off} to avoid any disturbing
+background activity by OpenOCD while you are operating at such low-level.
+@end deffn
+
@deffn Command {$dap_name baseaddr} [num]
Displays debug base address from MEM-AP @var{num},
defaulting to the currently selected AP.
@item @code{-rtos} @var{rtos_type} -- enable rtos support for target,
@var{rtos_type} can be one of @option{auto}, @option{eCos},
@option{ThreadX}, @option{FreeRTOS}, @option{linux}, @option{ChibiOS},
-@option{embKernel}, @option{mqx}, @option{uCOS-III}
+@option{embKernel}, @option{mqx}, @option{uCOS-III}, @option{nuttx}
@xref{gdbrtossupport,,RTOS Support}.
@item @code{-defer-examine} -- skip target examination at initial JTAG chain
where it is a mandatory configuration for the target run control.
@xref{armcrosstrigger,,ARM Cross-Trigger Interface},
for instruction on how to declare and control a CTI instance.
+
+@anchor{gdbportoverride}
+@item @code{-gdb-port} @var{number} -- see command @command{gdb_port} for the
+possible values of the parameter @var{number}, which are not only numeric values.
+Use this option to override, for this target only, the global parameter set with
+command @command{gdb_port}.
+@xref{gdb_port,,command gdb_port}.
@end itemize
@end deffn
Close the OpenOCD server, disconnecting all clients (GDB, telnet,
other). If option @option{error} is used, OpenOCD will return a
non-zero exit code to the parent process.
+
+Like any TCL commands, also @command{shutdown} can be redefined, e.g.:
+@example
+# redefine shutdown
+rename shutdown original_shutdown
+proc shutdown @{@} @{
+ puts "This is my implementation of shutdown"
+ # my own stuff before exit OpenOCD
+ original_shutdown
+@}
+@end example
+If user types CTRL-C or kills OpenOCD, either the command @command{shutdown}
+or its replacement will be automatically executed before OpenOCD exits.
@end deffn
@anchor{debuglevel}
@item @code{itmdump -f /dev/ttyUSB1 -d1}
@item OpenOCD invocation line:
@example
-openocd -f interface/stlink-v2-1.cfg \
+openocd -f interface/stlink.cfg \
-c "transport select hla_swd" \
-f target/stm32l1.cfg \
-c "tpiu config external uart off 24000000 12000000"
@deffn Command {cortex_m maskisr} (@option{auto}|@option{on}|@option{off})
Control masking (disabling) interrupts during target step/resume.
-The @option{auto} option handles interrupts during stepping a way they get
-served but don't disturb the program flow. The step command first allows
+The @option{auto} option handles interrupts during stepping in a way that they
+get served but don't disturb the program flow. The step command first allows
pending interrupt handlers to execute, then disables interrupts and steps over
the next instruction where the core was halted. After the step interrupts
are enabled again. If the interrupt handlers don't complete within 500ms,
@item @option{embKernel}
@item @option{mqx}
@item @option{uCOS-III}
+@item @option{nuttx}
@end itemize
@quotation Note
_mqx_kernel_data, MQX_init_struct.
@item uC/OS-III symbols
OSRunning, OSTCBCurPtr, OSTaskDbgListPtr, OSTaskQty
+@item nuttx symbols
+g_readytorun, g_tasklisttable
@end table
For most RTOS supported the above symbols will be exported by default. However for