jtag/presto: switch to command 'adapter serial'

[openocd.git] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index c36047f07a2d2234024af78b087ecd4d611332e5..1e2524c7ec9520b163df3706ae0488c19105ae39 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -2371,9 +2371,9 @@ This command is only available if your libusb1 is at least version 1.0.16.
 Specifies the @var{serial_string} of the adapter to use.
 If this command is not specified, serial strings are not checked.
 Only the following adapter drivers use the serial string from this command:
-cmsis_dap, ft232r, ftdi, kitprog.
+cmsis_dap, ft232r, ftdi, kitprog, presto.
 The following adapters have their own command to specify the serial string:
-hla, jlink, presto, st-link, vsllink, xds110.
+hla, jlink, st-link, vsllink, xds110.
 @end deffn
 
 @section Interface Drivers
@@ -3010,9 +3010,6 @@ parport cable wiggler
 
 @deffn {Interface Driver} {presto}
 ASIX PRESTO USB JTAG programmer.
-@deffn {Config Command} {presto serial} serial_string
-Configures the USB serial number of the Presto device to use.
-@end deffn
 @end deffn
 
 @deffn {Interface Driver} {rlink}