flash/stm32l4x: add support of STM32U57x/U58x
[openocd.git] / doc / openocd.texi
index 340e6b65b025a05a77487ff6c011a6e6d3f5a14a..2759a39d33041e760c6adfa3c61379fd8c14f586 100644 (file)
@@ -7302,7 +7302,7 @@ The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn
 
 @deffn {Flash Driver} {stm32l4x}
-All members of the STM32 G0, G4, L4, L4+, L5, WB and WL
+All members of the STM32 G0, G4, L4, L4+, L5, U5, WB and WL
 microcontroller families from STMicroelectronics include internal flash
 and use ARM Cortex-M0+, M4 and M33 cores.
 The driver automatically recognizes a number of these chips using
@@ -7344,6 +7344,13 @@ Unlocks the entire stm32 device.
 The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn
 
+@deffn Command {stm32l4x flashloader} num [@option{enable} | @option{disable}]
+Enables or disables the flashloader usage (enabled by default),
+when disabled it will fall back to direct memory access to program the Flash or OTP memories.
+if neither @option{enabled} nor @option{disable} are specified, the command will display
+the current configuration.
+@end deffn
+
 @deffn {Command} {stm32l4x mass_erase} num
 Mass erases the entire stm32l4x device.
 The @var{num} parameter is a value shown by @command{flash banks}.
@@ -7400,6 +7407,14 @@ write protected areas in a specific @var{device_bank}
 Forces a re-load of the option byte registers. Will cause a system reset of the device.
 The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn
+
+@deffn Command {stm32l4x trustzone} num [@option{enable} | @option{disable}]
+Enables or disables Global TrustZone Security, using the TZEN option bit.
+If neither @option{enabled} nor @option{disable} are specified, the command will display
+the TrustZone status.
+@emph{Note:} This command works only with devices with TrustZone, eg. STM32L5.
+@emph{Note:} This command will perform an OBL_Launch after modifying the TZEN.
+@end deffn
 @end deffn
 
 @deffn {Flash Driver} {str7x}

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)