@b{Flash Programing:} Flash writing is supported for external CFI
compatible NOR flashes (Intel and AMD/Spansion command set) and several
-internal flashes (LPC1700, LPC2000, AT91SAM7, AT91SAM3U, STR7x, STR9x, LM3,
-STM32x and EFM32). Preliminary support for various NAND flash controllers
-(LPC3180, Orion, S3C24xx, more) controller is included.
+internal flashes (LPC1700, LPC1800, LPC2000, LPC4300, AT91SAM7, AT91SAM3U,
+STR7x, STR9x, LM3, STM32x and EFM32). Preliminary support for various NAND flash
+controllers (LPC3180, Orion, S3C24xx, more) controller is included.
@section OpenOCD Web Site
Likewise, the @command{arm9 vector_catch} command (or
@cindex vector_catch
its siblings @command{xscale vector_catch}
-and @command{cortex_m3 vector_catch}) can be a timesaver
+and @command{cortex_m vector_catch}) can be a timesaver
during some debug sessions, but don't make everyone use that either.
Keep those kinds of debugging aids in your user config file,
along with messaging and tracing setup.
Such a handler might write to chip registers to force a reset,
use a JRC to do that (preferable -- the target may be wedged!),
or force a watchdog timer to trigger.
-(For Cortex-M3 targets, this is not necessary. The target
+(For Cortex-M targets, this is not necessary. The target
driver knows how to use trigger an NVIC reset when SRST is
not available.)
TargetName Type Endian TapName State
-- ------------------ ---------- ------ ------------------ ------------
0* at91rm9200.cpu arm920t little at91rm9200.cpu running
- 1 MyTarget cortex_m3 little mychip.foo tap-disabled
+ 1 MyTarget cortex_m little mychip.foo tap-disabled
@end verbatim
One member of that list is the @dfn{current target}, which
@item @code{avr} -- implements Atmel's 8-bit AVR instruction set.
(Support for this is preliminary and incomplete.)
@item @code{cortex_a8} -- this is an ARMv7 core with an MMU
-@item @code{cortex_m3} -- this is an ARMv7 core, supporting only the
+@item @code{cortex_m} -- this is an ARMv7 core, supporting only the
compact Thumb2 instruction set.
@item @code{dragonite} -- resembles arm966e
@item @code{dsp563xx} -- implements Freescale's 24-bit DSP.
The key steps you use might look something like this
@example
-target create MyTarget cortex_m3 -chain-position mychip.cpu
+target create MyTarget cortex_m -chain-position mychip.cpu
$MyTarget configure -work-area-phys 0x08000 -work-area-size 8096
$MyTarget configure -event reset-deassert-pre @{ jtag_rclk 5 @}
$MyTarget configure -event reset-init @{ myboard_reinit @}
@end deffn
@deffn {Flash Driver} lpc2000
-Most members of the LPC1700 and LPC2000 microcontroller families from NXP
-include internal flash and use Cortex-M3 (LPC1700) or ARM7TDMI (LPC2000) cores.
+Most members of the LPC1700, LPC1800, LPC2000 and LPC4300 microcontroller
+families from NXP include internal flash and use Cortex-M3 (LPC1700, LPC1800),
+Cortex-M4 (LPC4300) or ARM7TDMI (LPC2000) cores.
@quotation Note
There are LPC2000 devices which are not supported by the @var{lpc2000}
@item @var{variant} ... required, may be
@option{lpc2000_v1} (older LPC21xx and LPC22xx)
@option{lpc2000_v2} (LPC213x, LPC214x, LPC210[123], LPC23xx and LPC24xx)
-or @option{lpc1700} (LPC175x and LPC176x)
+@option{lpc1700} (LPC175x and LPC176x)
+or @option{lpc4300} - available also as @option{lpc1800} alias (LPC18x[2357] and
+LPC43x[2357])
@item @var{clock_kHz} ... the frequency, in kiloHertz,
at which the core is running
@item @option{calc_checksum} ... optional (but you probably want to provide this!),
@cindex Debug Access Port
@cindex DAP
These commands are specific to ARM architecture v7 Debug Access Port (DAP),
-included on Cortex-M3 and Cortex-A8 systems.
+included on Cortex-M and Cortex-A8 systems.
They are available in addition to other core-specific commands that may be available.
@deffn Command {dap apid} [num]
If @var{value} is defined, first assigns that.
@end deffn
-@subsection Cortex-M3 specific commands
-@cindex Cortex-M3
+@deffn Command {dap apcsw} [0 / 1]
+fix CSW_SPROT from register AP_REG_CSW on selected dap.
+Defaulting to 0.
+@end deffn
+
+@subsection Cortex-M specific commands
+@cindex Cortex-M
-@deffn Command {cortex_m3 maskisr} (@option{auto}|@option{on}|@option{off})
+@deffn Command {cortex_m maskisr} (@option{auto}|@option{on}|@option{off})
Control masking (disabling) interrupts during target step/resume.
The @option{auto} option handles interrupts during stepping a way they get
Default is @option{auto}.
@end deffn
-@deffn Command {cortex_m3 vector_catch} [@option{all}|@option{none}|list]
+@deffn Command {cortex_m vector_catch} [@option{all}|@option{none}|list]
@cindex vector_catch
Vector Catch hardware provides dedicated breakpoints
for certain hardware events.
This finishes by listing the current vector catch configuration.
@end deffn
-@deffn Command {cortex_m3 reset_config} (@option{srst}|@option{sysresetreq}|@option{vectreset})
+@deffn Command {cortex_m reset_config} (@option{srst}|@option{sysresetreq}|@option{vectreset})
Control reset handling. The default @option{srst} is to use srst if fitted,
otherwise fallback to @option{vectreset}.
@itemize @minus
@item @option{sysresetreq} use NVIC SYSRESETREQ to reset system.
@item @option{vectreset} use NVIC VECTRESET to reset system.
@end itemize
-Using @option{vectreset} is a safe option for all current Cortex-M3 cores.
+Using @option{vectreset} is a safe option for all current Cortex-M cores.
This however has the disadvantage of only resetting the core, all peripherals
are uneffected. A solution would be to use a @code{reset-init} event handler to manually reset
the peripherals.
a lighter weight mechanism using only the DCC channel.
Currently @command{target_request debugmsgs}
-is supported only for @option{arm7_9} and @option{cortex_m3} cores.
+is supported only for @option{arm7_9} and @option{cortex_m} cores.
These messages are received as part of target polling, so
you need to have @command{poll on} active to receive them.
They are intrusive in that they will affect program execution
@example
define hook-step
-mon cortex_m3 maskisr on
+mon cortex_m maskisr on
end
define hookpost-step
-mon cortex_m3 maskisr off
+mon cortex_m maskisr off
end
@end example
Code Review / openocd.git / blobdiff