docs: add initial target rtos support info

[openocd.git] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 3134afdef618811559143f6f8da07f5b376303b8..34d0884c94fdd8a70b682a7183402e8ea3d0ed5a 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -461,6 +461,12 @@ The simplest solution is to get linux to ignore the ST-LINK using one of the fol
 
 @item @b{Buspirate}
 @* Link: @url{http://dangerousprototypes.com/bus-pirate-manual/}
+
+@item @b{opendous}
+@* Link: @url{http://code.google.com/p/opendous-jtag/}
+
+@item @b{estick}
+@* Link: @url{http://code.google.com/p/estick-jtag/}
 @end itemize
 
 @section IBM PC Parallel Printer Port Based
@@ -2693,6 +2699,10 @@ Manually sets the stlink api used, valid options are 1 or 2.
 @end deffn
 @end deffn
 
+@deffn {Interface Driver} {opendous}
+opendous-jtag is a freely programmable USB adapter.
+@end deffn
+
 @deffn {Interface Driver} {ZY1000}
 This is the Zylin ZY1000 JTAG debugger.
 @end deffn
@@ -3930,6 +3940,10 @@ base @var{address} to be used when an MMU is active.
 The value should normally correspond to a static mapping for the
 @code{-work-area-phys} address, set up by the current operating system.
 
+@item @code{-rtos} @var{rtos_type} -- enable rtos support for target,
+@var{rtos_type} can be one of @option{auto}|@option{eCos}|@option{threadx}|
+@option{freertos}|@option{linux}.
+
 @end itemize
 @end deffn