jtag/cmsis_dap: switch to command 'adapter serial'

[openocd.git] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 286943643798e9a8017a0d9e7476be39ac851dea..4ce6e0426265c4470c5dcff9cd8641af154039b8 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -2370,9 +2370,10 @@ This command is only available if your libusb1 is at least version 1.0.16.
 @deffn {Config Command} {adapter serial} serial_string
 Specifies the @var{serial_string} of the adapter to use.
 If this command is not specified, serial strings are not checked.
-No adapter uses this command, so far.
+Only the following adapter drivers use the serial string from this command:
+cmsis_dap.
 The following adapters have their own command to specify the serial string:
-cmsis_dap, ft232r, ftdi, hla, jlink, kitprog, presto, st-link, vsllink, xds110.
+ft232r, ftdi, hla, jlink, kitprog, presto, st-link, vsllink, xds110.
 @end deffn
 
 @section Interface Drivers
@@ -2427,11 +2428,6 @@ cmsis_dap_vid_pid 0xc251 0xf001 0x0d28 0x0204
 @end example
 @end deffn
 
-@deffn {Config Command} {cmsis_dap_serial} [serial]
-Specifies the @var{serial} of the CMSIS-DAP device to use.
-If not specified, serial numbers are not considered.
-@end deffn
-
 @deffn {Config Command} {cmsis_dap_backend} [@option{auto}|@option{usb_bulk}|@option{hid}]
 Specifies how to communicate with the adapter: