docs: gdb_target_description defaults enabled

[openocd.git] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 6ce1d285a84d9e466224610769f62fa33d5eeb01..511bc6c139c89e746af4359b47b5fd2268def641 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -2190,7 +2190,7 @@ use @option{enable} see these errors reported.
 
 @deffn {Config Command} gdb_target_description (@option{enable}|@option{disable})
 Set to @option{enable} to cause OpenOCD to send the target descriptions to gdb via qXfer:features:read packet.
-The default behaviour is @option{disable}.
+The default behaviour is @option{enable}.
 @end deffn
 
 @deffn {Command} gdb_save_tdesc
@@ -2685,6 +2685,17 @@ reset_config srst_only
 @end example
 @end deffn
 
+@deffn {Command} {usb_blaster_lowlevel_driver} (@option{ftdi}|@option{ftd2xx}|@option{ublast2})
+Chooses the low level access method for the adapter. If not specified,
+@option{ftdi} is selected unless it wasn't enabled during the
+configure stage. USB-Blaster II needs @option{ublast2}.
+@end deffn
+
+@deffn {Command} {usb_blaster_firmware} @var{path}
+This command specifies @var{path} to access USB-Blaster II firmware
+image. To be used with USB-Blaster II only.
+@end deffn
+
 @end deffn
 
 @deffn {Interface Driver} {gw16012}