technical information about the software internals, development
processes, and similar documentation:
-@uref{http://openocd.sourceforge.net/doc/doxygen/index.html}
+@uref{http://openocd.sourceforge.net/doc/doxygen/html/index.html}
This document is a work-in-progress, but contributions would be welcome
to fill in the gaps. All of the source files are provided in-tree,
@* Axiom AXM-0432 Link @url{http://www.axman.com}
@item @b{cortino}
@* Link @url{http://www.hitex.com/index.php?id=cortino}
+@item @b{dlp-usb1232h}
+@* Link @url{http://www.dlpdesign.com/usb/usb1232h.shtml}
@end itemize
@section USB-JTAG / Altera USB-Blaster compatibles
@end deffn
@comment current lpc3180 code won't issue 5-byte address cycles
+@deffn {NAND Driver} mx3
+This driver handles the NAND controller in i.MX31. The mxc driver
+should work for this chip aswell.
+@end deffn
+
+@deffn {NAND Driver} mxc
+This driver handles the NAND controller found in Freescale i.MX
+chips. It has support for v1 (i.MX27 and i.MX31) and v2 (i.MX35).
+The driver takes 3 extra arguments, chip (@option{mx27},
+@option{mx31}, @option{mx35}), ecc (@option{noecc}, @option{hwecc})
+and optionally if bad block information should be swapped between
+main area and spare area (@option{biswap}), defaults to off.
+@example
+nand device mx35.nand mxc imx35.cpu mx35 hwecc biswap
+@end example
+@deffn Command {mxc biswap} bank_num [enable|disable]
+Turns on/off bad block information swaping from main area,
+without parameter query status.
+@end deffn
+@end deffn
+
@deffn {NAND Driver} orion
These controllers require an extra @command{nand device}
parameter: the address of the controller.