ipdbg: fix double free of virtual-ir data

[openocd.git] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 651cc53bb3377208368fc380c9b6a261e64f30a5..55e6e76808b96da23b3c39cbc8de2f906bd8e859 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -6776,6 +6776,24 @@ Note that in order for this command to take effect, the target needs to be reset
 supported.}
 @end deffn
 
+@deffn {Flash Driver} {eneispif}
+All versions of the KB1200 microcontrollers from ENE include internal
+flash. The eneispif flash driver supports the KB1200 family of devices. The driver
+automatically recognizes the specific version's flash parameters and
+autoconfigures itself. The flash bank starts at address 0x60000000. An optional additional
+parameter sets the address of eneispif controller, with the default address is 0x50101000.
+
+@example
+
+flash bank $_FLASHNAME eneispif 0x60000000 0 0 0 $_TARGETNAME \
+           0x50101000
+
+# Address defaults to 0x50101000
+flash bank $_FLASHNAME eneispif 0x60000000 0 0 0 $_TARGETNAME
+
+@end example
+@end deffn
+
 @deffn {Flash Driver} {esirisc}
 Members of the eSi-RISC family may optionally include internal flash programmed
 via the eSi-TSMC Flash interface. Additional parameters are required to
@@ -9173,6 +9191,18 @@ read_memory 0x20000000 32 2
 @end example
 @end deffn
 
+@deffn {Command} {debug_reason}
+Displays the current debug reason:
+@code{debug-request},
+@code{breakpoint},
+@code{watchpoint},
+@code{watchpoint-and-breakpoint},
+@code{single-step},
+@code{target-not-halted},
+@code{program-exit},
+@code{exception-catch} or @code{undefined}.
+@end deffn
+
 @deffn {Command} {halt} [ms]
 @deffnx {Command} {wait_halt} [ms]
 The @command{halt} command first sends a halt request to the target,
@@ -12198,6 +12228,20 @@ xc7.ipdbghub ipdbg start -port 5555 -tool 0
 Starts a server listening on tcp-port 5555 which connects to tool 0 (data_up_0/data_down_0).
 The TAP and ir value used to reach the JTAG Hub is given by the pld driver.
 
+@deffn {Command} {$hub_name queuing} @option{-size @var{size}}
+Configure the queuing between IPDBG JTAG-Host and Hub.
+The maximum possible queue size is 1024 which is also the default.
+
+@itemize @bullet
+@item @option{-size @var{size}} max number of transfers in the queue.
+@end itemize
+@end deffn
+
+@example
+bitbang.ibdbghub queuing -size 32
+@end example
+Send a maximum of 32 transfers to the queue before executing them.
+
 
 @node Utility Commands
 @chapter Utility Commands