doc: fix some typo about STMicroelectronics name

[openocd.git] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 6ad19e1e892bd64652921119d0b0747d5ef4aab8..711ef4d54ad0851ad7beefdde9fbe74cca562a52 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -156,8 +156,8 @@ OpenOCD internally. @xref{Debug Adapter Hardware}.
 
 @b{GDB Debug:} It allows ARM7 (ARM7TDMI and ARM720t), ARM9 (ARM920T,
 ARM922T, ARM926EJ--S, ARM966E--S), XScale (PXA25x, IXP42x), Cortex-M3
-(Stellaris LM3, ST STM32 and Energy Micro EFM32) and Intel Quark (x10xx)
-based cores to be debugged via the GDB protocol.
+(Stellaris LM3, STMicroelectronics STM32 and Energy Micro EFM32) and
+Intel Quark (x10xx) based cores to be debugged via the GDB protocol.
 
 @b{Flash Programming:} Flash writing is supported for external
 CFI-compatible NOR flashes (Intel and AMD/Spansion command set) and several
@@ -477,8 +477,8 @@ SWD and not JTAG, thus not supported.
 @end itemize
 
 @section USB ST-LINK based
-ST Micro has an adapter called @b{ST-LINK}.
-They only work with ST Micro chips, notably STM32 and STM8.
+STMicroelectronics has an adapter called @b{ST-LINK}.
+They only work with STMicroelectronics chips, notably STM32 and STM8.
 
 @itemize @bullet
 @item @b{ST-LINK}
@@ -487,6 +487,9 @@ They only work with ST Micro chips, notably STM32 and STM8.
 @item @b{ST-LINK/V2}
 @* This is available standalone and as part of some kits, eg. STM32F4DISCOVERY.
 @* Link: @url{http://www.st.com/internet/evalboard/product/251168.jsp}
+@item @b{STLINK-V3}
+@* This is available standalone and as part of some kits.
+@* Link: @url{http://www.st.com/stlink-v3}
 @end itemize
 
 For info the original ST-LINK enumerates using the mass storage usb class; however,
@@ -3044,7 +3047,7 @@ This is a driver that supports multiple High Level Adapters.
 This type of adapter does not expose some of the lower level api's
 that OpenOCD would normally use to access the target.
 
-Currently supported adapters include the ST ST-LINK and TI ICDI.
+Currently supported adapters include the STMicroelectronics ST-LINK and TI ICDI.
 ST-LINK firmware version >= V2.J21.S4 recommended due to issues with earlier
 versions of firmware where serial number is reset after first use.  Suggest
 using ST firmware update utility to upgrade ST-LINK firmware even if current
@@ -6467,7 +6470,7 @@ applied to all of them.
 
 @deffn {Flash Driver} stm32f1x
 All members of the STM32F0, STM32F1 and STM32F3 microcontroller families
-from ST Microelectronics include internal flash and use ARM Cortex-M0/M3/M4 cores.
+from STMicroelectronics include internal flash and use ARM Cortex-M0/M3/M4 cores.
 The driver automatically recognizes a number of these chips using
 the chip identification register, and autoconfigures itself.
 
@@ -6527,7 +6530,7 @@ The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn
 
 @deffn {Flash Driver} stm32f2x
-All members of the STM32F2, STM32F4 and STM32F7 microcontroller families from ST Microelectronics
+All members of the STM32F2, STM32F4 and STM32F7 microcontroller families from STMicroelectronics
 include internal flash and use ARM Cortex-M3/M4/M7 cores.
 The driver automatically recognizes a number of these chips using
 the chip identification register, and autoconfigures itself.
@@ -6581,7 +6584,7 @@ The @var{num} parameter is a value shown by @command{flash banks}, @var{optcr2}
 @end deffn
 
 @deffn {Flash Driver} stm32h7x
-All members of the STM32H7 microcontroller families from ST Microelectronics
+All members of the STM32H7 microcontroller families from STMicroelectronics
 include internal flash and use ARM Cortex-M7 core.
 The driver automatically recognizes a number of these chips using
 the chip identification register, and autoconfigures itself.
@@ -6617,7 +6620,7 @@ The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn
 
 @deffn {Flash Driver} stm32lx
-All members of the STM32L microcontroller families from ST Microelectronics
+All members of the STM32L microcontroller families from STMicroelectronics
 include internal flash and use ARM Cortex-M3 and Cortex-M0+ cores.
 The driver automatically recognizes a number of these chips using
 the chip identification register, and autoconfigures itself.
@@ -6657,7 +6660,7 @@ The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn
 
 @deffn {Flash Driver} stm32l4x
-All members of the STM32L4 microcontroller families from ST Microelectronics
+All members of the STM32L4 microcontroller families from STMicroelectronics
 include internal flash and use ARM Cortex-M4 cores.
 The driver automatically recognizes a number of these chips using
 the chip identification register, and autoconfigures itself.
@@ -6729,7 +6732,7 @@ The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn
 
 @deffn {Flash Driver} str7x
-All members of the STR7 microcontroller family from ST Microelectronics
+All members of the STR7 microcontroller family from STMicroelectronics
 include internal flash and use ARM7TDMI cores.
 The @var{str7x} driver defines one mandatory parameter, @var{variant},
 which is either @code{STR71x}, @code{STR73x} or @code{STR75x}.
@@ -6746,7 +6749,7 @@ for the specified flash bank.
 @end deffn
 
 @deffn {Flash Driver} str9x
-Most members of the STR9 microcontroller family from ST Microelectronics
+Most members of the STR9 microcontroller family from STMicroelectronics
 include internal flash and use ARM966E cores.
 The str9 needs the flash controller to be configured using
 the @command{str9x flash_config} command prior to Flash programming.