arch: Added ARMv7R and Cortex-R4 support

[openocd.git] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 9f3a8515c94ff884e63c2d329f717202e9d4eade..721989817de82fcd49b2c5f99534ec0126fd8d70 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -389,6 +389,9 @@ to be available anymore as of April 2012.
 @* Link @url{http://www.dlpdesign.com/usb/usb1232h.shtml}
 @item @b{digilent-hs1}
 @* Link @url{http://www.digilentinc.com/Products/Detail.cfm?Prod=JTAG-HS1}
+@item @b{opendous}
+@* Link @url{http://code.google.com/p/opendous/wiki/JTAG} FT2232H-based
+(OpenHardware).
 @end itemize
 
 @section USB-JTAG / Altera USB-Blaster compatibles
@@ -480,7 +483,7 @@ evaluation boards. This is the adapter fitted to the Stellaris LaunchPad.
 @* Link: @url{http://dangerousprototypes.com/bus-pirate-manual/}
 
 @item @b{opendous}
-@* Link: @url{http://code.google.com/p/opendous-jtag/}
+@* Link: @url{http://code.google.com/p/opendous-jtag/} - which uses an AT90USB162
 
 @item @b{estick}
 @* Link: @url{http://code.google.com/p/estick-jtag/}
@@ -2539,6 +2542,11 @@ also reduces the risk of timeouts before receiving the expected number of bytes.
 The OpenOCD default value is 2 and for some systems a value of 10 has proved useful.
 @end deffn
 
+@deffn {Config Command} {ft2232_channel} channel
+Used to select the channel of the ft2232 chip to use (between 1 and 4).
+The default value is 1.
+@end deffn
+
 For example, the interface config file for a
 Turtelizer JTAG Adapter looks something like this: