@* A JTAG driver acting as a client for the JTAG VPI server interface.
@* Link: @url{http://github.com/fjullien/jtag_vpi}
+@item @b{vdebug}
+@* A driver for Cadence virtual Debug Interface to emulated or simulated targets.
+It implements a client connecting to the vdebug server, which in turn communicates
+with the emulated or simulated RTL model through a transactor. The current version
+supports only JTAG as a transport, but other virtual transports, like DAP are planned.
+
@item @b{jtag_dpi}
@* A JTAG driver acting as a client for the SystemVerilog Direct Programming
Interface (DPI) for JTAG devices. DPI allows OpenOCD to connect to the JTAG
echo [format "set p15 0x%04x, 0x%08x" $regs $value]
- arm mcr 15 [expr ($regs>>12)&0x7] \
- [expr ($regs>>0)&0xf] [expr ($regs>>4)&0xf] \
- [expr ($regs>>8)&0x7] $value
+ arm mcr 15 [expr @{($regs >> 12) & 0x7@}] \
+ [expr @{($regs >> 0) & 0xf@}] [expr @{($regs >> 4) & 0xf@}] \
+ [expr @{($regs >> 8) & 0x7@}] $value
@}
@end example
The result can be converted to Volts (ignoring the most significant bytes, always zero)
@example
> set a [st-link cmd 8 0xf7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
-> echo [expr 2*1.2*([lindex $a 4]+256*[lindex $a 5])/([lindex $a 0]+256*[lindex $a 1])]
+> set n [expr @{[lindex $a 4] + 256 * [lindex $a 5]@}]
+> set d [expr @{[lindex $a 0] + 256 * [lindex $a 1]@}]
+> echo [expr @{2 * 1.2 * $n / $d@}]
3.24891518738
@end example
@end deffn
@end deffn
+@deffn {Interface Driver} {vdebug}
+Cadence Virtual Debug Interface driver.
+
+@deffn {Config Command} {vdebug server} host:port
+Specifies the host and TCP port number where the vdebug server runs.
+@end deffn
+
+@deffn {Config Command} {vdebug batching} value
+Specifies the batching method for the vdebug request. Possible values are
+0 for no batching
+1 or wr to batch write transactions together (default)
+2 or rw to batch both read and write transactions
+@end deffn
+
+@deffn {Config Command} {vdebug polling} min max
+Takes two values, representing the polling interval in ms. Lower values mean faster
+debugger responsiveness, but lower emulation performance. The minimum should be
+around 10, maximum should not exceed 1000, which is the default gdb and keepalive
+timeout value.
+@end deffn
+
+@deffn {Config Command} {vdebug bfm_path} path clk_period
+Specifies the hierarchical path and input clk period of the vdebug BFM in the design.
+The hierarchical path uses Verilog notation top.inst.inst
+The clock period must include the unit, for instance 40ns.
+@end deffn
+
+@deffn {Config Command} {vdebug mem_path} path base size
+Specifies the hierarchical path to the design memory instance for backdoor access.
+Up to 4 memories can be specified. The hierarchical path uses Verilog notation.
+The base specifies start address in the design address space, size its size in bytes.
+Both values can use hexadecimal notation with prefix 0x.
+@end deffn
+@end deffn
+
@deffn {Interface Driver} {jtag_dpi}
SystemVerilog Direct Programming Interface (DPI) compatible driver for
JTAG devices in emulation. The driver acts as a client for the SystemVerilog
JTAG-level ID for several largely-compatible chips, it may be more practical
to ignore the version field than to update config files to handle all of
the various chip IDs. The version field is defined as bit 28-31 of the IDCODE.
+@item @code{-ignore-bypass}
+@*Specify this to ignore the 'bypass' bit of the idcode. Some vendor put
+an invalid idcode regarding this bit. Specify this to ignore this bit and
+to not consider this tap in bypass mode.
@item @code{-ircapture} @var{NUMBER}
@*The bit pattern loaded by the TAP into the JTAG shift register
on entry to the @sc{ircapture} state, such as 0x01.
and leaves the rest of the pattern intact. It configures memory access through
DCache on Cortex-M7.
@example
-set CSW_HPROT3_CACHEABLE [expr 1 << 27]
+set CSW_HPROT3_CACHEABLE [expr @{1 << 27@}]
samv.dap apcsw $CSW_HPROT3_CACHEABLE $CSW_HPROT3_CACHEABLE
@end example
Another example clears SPROT bit and leaves the rest of pattern intact:
@example
-set CSW_SPROT [expr 1 << 30]
+set CSW_SPROT [expr @{1 << 30@}]
samv.dap apcsw 0 $CSW_SPROT
@end example
be emulated to comply to GDB remote protocol.
@item @code{mips_m4k} -- a MIPS core.
@item @code{mips_mips64} -- a MIPS64 core.
-@item @code{nds32_v2} -- this is an Andes NDS32 v2 core.
-@item @code{nds32_v3} -- this is an Andes NDS32 v3 core.
-@item @code{nds32_v3m} -- this is an Andes NDS32 v3m core.
+@item @code{nds32_v2} -- this is an Andes NDS32 v2 core (deprecated; would be removed in v0.13.0).
+@item @code{nds32_v3} -- this is an Andes NDS32 v3 core (deprecated; would be removed in v0.13.0).
+@item @code{nds32_v3m} -- this is an Andes NDS32 v3m core (deprecated; would be removed in v0.13.0).
@item @code{or1k} -- this is an OpenRISC 1000 core.
The current implementation supports three JTAG TAP cores:
@itemize @minus
They are not otherwise documented here.
@end deffn
-@deffn {Command} {$target_name array2mem} arrayname width address count
-@deffnx {Command} {$target_name mem2array} arrayname width address count
-These provide an efficient script-oriented interface to memory.
-The @code{array2mem} primitive writes bytes, halfwords, words
-or double-words; while @code{mem2array} reads them.
-In both cases, the TCL side uses an array, and
-the target side uses raw memory.
+@deffn {Command} {$target_name set_reg} dict
+Set register values of the target.
+
+@itemize
+@item @var{dict} ... Tcl dictionary with pairs of register names and values.
+@end itemize
+
+For example, the following command sets the value 0 to the program counter (pc)
+register and 0x1000 to the stack pointer (sp) register:
+
+@example
+set_reg @{pc 0 sp 0x1000@}
+@end example
+@end deffn
+
+@deffn {Command} {$target_name get_reg} [-force] list
+Get register values from the target and return them as Tcl dictionary with pairs
+of register names and values.
+If option "-force" is set, the register values are read directly from the
+target, bypassing any caching.
+
+@itemize
+@item @var{list} ... List of register names
+@end itemize
+
+For example, the following command retrieves the values from the program
+counter (pc) and stack pointer (sp) register:
+
+@example
+get_reg @{pc sp@}
+@end example
+@end deffn
+
+@deffn {Command} {$target_name write_memory} address width data ['phys']
+This function provides an efficient way to write to the target memory from a Tcl
+script.
-The efficiency comes from enabling the use of
-bulk JTAG data transfer operations.
-The script orientation comes from working with data
-values that are packaged for use by TCL scripts;
-@command{mdw} type primitives only print data they retrieve,
-and neither store nor return those values.
+@itemize
+@item @var{address} ... target memory address
+@item @var{width} ... memory access bit size, can be 8, 16, 32 or 64
+@item @var{data} ... Tcl list with the elements to write
+@item ['phys'] ... treat the memory address as physical instead of virtual address
+@end itemize
+
+For example, the following command writes two 32 bit words into the target
+memory at address 0x20000000:
+
+@example
+write_memory 0x20000000 32 @{0xdeadbeef 0x00230500@}
+@end example
+@end deffn
+
+@deffn {Command} {$target_name read_memory} address width count ['phys']
+This function provides an efficient way to read the target memory from a Tcl
+script.
+A Tcl list containing the requested memory elements is returned by this function.
@itemize
-@item @var{arrayname} ... is the name of an array variable
-@item @var{width} ... is 8/16/32/64 - indicating the memory access size
-@item @var{address} ... is the target memory address
-@item @var{count} ... is the number of elements to process
+@item @var{address} ... target memory address
+@item @var{width} ... memory access bit size, can be 8, 16, 32 or 64
+@item @var{count} ... number of elements to read
+@item ['phys'] ... treat the memory address as physical instead of virtual address
@end itemize
+
+For example, the following command reads two 32 bit words from the target
+memory at address 0x20000000:
+
+@example
+read_memory 0x20000000 32 2
+@end example
@end deffn
@deffn {Command} {$target_name cget} queryparm
Otherwise, or if the optional @var{phys} flag is specified,
@var{addr} is interpreted as a physical address.
If @var{count} is specified, displays that many units.
-(If you want to manipulate the data instead of displaying it,
-see the @code{mem2array} primitives.)
+(If you want to process the data instead of displaying it,
+see the @code{read_memory} primitives.)
@end deffn
@deffn {Command} {$target_name mwd} [phys] addr doubleword [count]
@* After single-step has completed
@item @b{trace-config}
@* After target hardware trace configuration was changed
+@item @b{semihosting-user-cmd-0x100}
+@* The target made a semihosting call with user-defined operation number 0x100
+@item @b{semihosting-user-cmd-0x101}
+@* The target made a semihosting call with user-defined operation number 0x101
+@item @b{semihosting-user-cmd-0x102}
+@* The target made a semihosting call with user-defined operation number 0x102
+@item @b{semihosting-user-cmd-0x103}
+@* The target made a semihosting call with user-defined operation number 0x103
+@item @b{semihosting-user-cmd-0x104}
+@* The target made a semihosting call with user-defined operation number 0x104
+@item @b{semihosting-user-cmd-0x105}
+@* The target made a semihosting call with user-defined operation number 0x105
+@item @b{semihosting-user-cmd-0x106}
+@* The target made a semihosting call with user-defined operation number 0x106
+@item @b{semihosting-user-cmd-0x107}
+@* The target made a semihosting call with user-defined operation number 0x107
@end itemize
@quotation Note
@end deffn
@deffn {Flash Driver} {bluenrg-x}
-STMicroelectronics BlueNRG-1, BlueNRG-2 and BlueNRG-LP Bluetooth low energy wireless system-on-chip. They include ARM Cortex-M0/M0+ core and internal flash memory.
+STMicroelectronics BlueNRG-1, BlueNRG-2 and BlueNRG-LP/LPS Bluetooth low energy wireless system-on-chip. They include ARM Cortex-M0/M0+ core and internal flash memory.
The driver automatically recognizes these chips using
the chip identification registers, and autoconfigures itself.
@end deffn
@deffn {Flash Driver} {efm32}
-All members of the EFM32 microcontroller family from Energy Micro include
-internal flash and use ARM Cortex-M3 cores. The driver automatically recognizes
-a number of these chips using the chip identification register, and
+All members of the EFM32/EFR32 microcontroller family from Energy Micro (now Silicon Labs)
+include internal flash and use Arm Cortex-M3 or Cortex-M4 cores. The driver automatically
+recognizes a number of these chips using the chip identification register, and
autoconfigures itself.
@example
flash bank $_FLASHNAME efm32 0 0 0 0 $_TARGETNAME
@end example
+It supports writing to the user data page, as well as the portion of the lockbits page
+past 512 bytes on chips with larger page sizes. The latter is used by the SiLabs
+bootloader/AppLoader system for encryption keys. Setting protection on these pages is
+currently not supported.
+@example
+flash bank userdata.flash efm32 0x0FE00000 0 0 0 $_TARGETNAME
+flash bank lockbits.flash efm32 0x0FE04000 0 0 0 $_TARGETNAME
+@end example
+
A special feature of efm32 controllers is that it is possible to completely disable the
debug interface by writing the correct values to the 'Debug Lock Word'. OpenOCD supports
this via the following command:
All members of the STM32F0, STM32F1 and STM32F3 microcontroller families
from STMicroelectronics and all members of the GD32F1x0, GD32F3x0 and GD32E23x microcontroller
families from GigaDevice include internal flash and use ARM Cortex-M0/M3/M4/M23 cores.
+The driver also works with GD32VF103 powered by RISC-V core.
The driver automatically recognizes a number of these chips using
the chip identification register, and autoconfigures itself.
@end example
@end deffn
+@deffn {Command} {set_reg} dict
+Set register values of the target.
+
+@itemize
+@item @var{dict} ... Tcl dictionary with pairs of register names and values.
+@end itemize
+
+For example, the following command sets the value 0 to the program counter (pc)
+register and 0x1000 to the stack pointer (sp) register:
+
+@example
+set_reg @{pc 0 sp 0x1000@}
+@end example
+@end deffn
+
+@deffn {Command} {get_reg} [-force] list
+Get register values from the target and return them as Tcl dictionary with pairs
+of register names and values.
+If option "-force" is set, the register values are read directly from the
+target, bypassing any caching.
+
+@itemize
+@item @var{list} ... List of register names
+@end itemize
+
+For example, the following command retrieves the values from the program
+counter (pc) and stack pointer (sp) register:
+
+@example
+get_reg @{pc sp@}
+@end example
+@end deffn
+
+@deffn {Command} {write_memory} address width data ['phys']
+This function provides an efficient way to write to the target memory from a Tcl
+script.
+
+@itemize
+@item @var{address} ... target memory address
+@item @var{width} ... memory access bit size, can be 8, 16, 32 or 64
+@item @var{data} ... Tcl list with the elements to write
+@item ['phys'] ... treat the memory address as physical instead of virtual address
+@end itemize
+
+For example, the following command writes two 32 bit words into the target
+memory at address 0x20000000:
+
+@example
+write_memory 0x20000000 32 @{0xdeadbeef 0x00230500@}
+@end example
+@end deffn
+
+@deffn {Command} {read_memory} address width count ['phys']
+This function provides an efficient way to read the target memory from a Tcl
+script.
+A Tcl list containing the requested memory elements is returned by this function.
+
+@itemize
+@item @var{address} ... target memory address
+@item @var{width} ... memory access bit size, can be 8, 16, 32 or 64
+@item @var{count} ... number of elements to read
+@item ['phys'] ... treat the memory address as physical instead of virtual address
+@end itemize
+
+For example, the following command reads two 32 bit words from the target
+memory at address 0x20000000:
+
+@example
+read_memory 0x20000000 32 2
+@end example
+@end deffn
+
@deffn {Command} {halt} [ms]
@deffnx {Command} {wait_halt} [ms]
The @command{halt} command first sends a halt request to the target,
Otherwise, or if the optional @var{phys} flag is specified,
@var{addr} is interpreted as a physical address.
If @var{count} is specified, displays that many units.
-(If you want to manipulate the data instead of displaying it,
-see the @code{mem2array} primitives.)
+(If you want to process the data instead of displaying it,
+see the @code{read_memory} primitives.)
@end deffn
@deffn {Command} {mwd} [phys] addr doubleword [count]
proc load_image_bin @{fname foffset address length @} @{
# Load data from fname filename at foffset offset to
# target at address. Load at most length bytes.
- load_image $fname [expr $address - $foffset] bin \
+ load_image $fname [expr @{$address - $foffset@}] bin \
$address $length
@}
@end example
Supervisor Call vector by OpenOCD.
@end deffn
+@deffn {Command} {arm semihosting_redirect} (@option{disable} | @option{tcp} <port>
+[@option{debug}|@option{stdio}|@option{all})
+@cindex ARM semihosting
+Redirect semihosting messages to a specified TCP port.
+
+This command redirects debug (READC, WRITEC and WRITE0) and stdio (READ, WRITE)
+semihosting operations to the specified TCP port.
+The command allows to select which type of operations to redirect (debug, stdio, all (default)).
+Note: for stdio operations, only I/O from/to ':tt' file descriptors are redirected.
+@end deffn
+
@deffn {Command} {arm semihosting_cmdline} [@option{enable}|@option{disable}]
@cindex ARM semihosting
Set the command line to be passed to the debugger.
this option (default: disabled).
@end deffn
+@deffn {Command} {arm semihosting_read_user_param}
+@cindex ARM semihosting
+Read parameter of the semihosting call from the target. Usable in
+semihosting-user-cmd-0x10* event handlers, returning a string.
+
+When the target makes semihosting call with operation number from range 0x100-
+0x107, an optional string parameter can be passed to the server. This parameter
+is valid during the run of the event handlers and is accessible with this
+command.
+@end deffn
+
@section ARMv4 and ARMv5 Architecture
@cindex ARMv4
@cindex ARMv5
another hart, or may be a separate core. RISC-V treats those the same, and
OpenOCD exposes each hart as a separate core.
+@subsection Vector Registers
+
+For harts that implement the vector extension, OpenOCD provides access to the
+relevant CSRs, as well as the vector registers (v0-v31). The size of each
+vector register is dependent on the value of vlenb. RISC-V allows each vector
+register to be divided into selected-width elements, and this division can be
+changed at run-time. Because OpenOCD cannot update register definitions at
+run-time, it exposes each vector register to gdb as a union of fields of
+vectors so that users can easily access individual bytes, shorts, words,
+longs, and quads inside each vector register. It is left to gdb or
+higher-level debuggers to present this data in a more intuitive format.
+
+In the XML register description, the vector registers (when vlenb=16) look as
+follows:
+
+@example
+<feature name="org.gnu.gdb.riscv.vector">
+<vector id="bytes" type="uint8" count="16"/>
+<vector id="shorts" type="uint16" count="8"/>
+<vector id="words" type="uint32" count="4"/>
+<vector id="longs" type="uint64" count="2"/>
+<vector id="quads" type="uint128" count="1"/>
+<union id="riscv_vector">
+<field name="b" type="bytes"/>
+<field name="s" type="shorts"/>
+<field name="w" type="words"/>
+<field name="l" type="longs"/>
+<field name="q" type="quads"/>
+</union>
+<reg name="v0" bitsize="128" regnum="4162" save-restore="no"
+ type="riscv_vector" group="vector"/>
+...
+<reg name="v31" bitsize="128" regnum="4193" save-restore="no"
+ type="riscv_vector" group="vector"/>
+</feature>
+@end example
+
@subsection RISC-V Debug Configuration Commands
@deffn {Config Command} {riscv expose_csrs} n[-m|=name] [...]
deasserted.
@end deffn
-@deffn {Command} {riscv set_prefer_sba} on|off
-When on, prefer to use System Bus Access to access memory. When off (default),
-prefer to use the Program Buffer to access memory.
+@deffn {Command} {riscv set_scratch_ram} none|[address]
+Set the address of 16 bytes of scratch RAM the debugger can use, or 'none'.
+This is used to access 64-bit floating point registers on 32-bit targets.
+@end deffn
+
+@deffn Command {riscv set_mem_access} method1 [method2] [method3]
+Specify which RISC-V memory access method(s) shall be used, and in which order
+of priority. At least one method must be specified.
+
+Available methods are:
+@itemize
+@item @code{progbuf} - Use RISC-V Debug Program Buffer to access memory.
+@item @code{sysbus} - Access memory via RISC-V Debug System Bus interface.
+@item @code{abstract} - Access memory via RISC-V Debug abstract commands.
+@end itemize
+
+By default, all memory access methods are enabled in the following order:
+@code{progbuf sysbus abstract}.
+
+This command can be used to change the memory access methods if the default
+behavior is not suitable for a particular target.
@end deffn
@deffn {Command} {riscv set_enable_virtual} on|off
configuration file, immediately following @command{init}:
@example
set challenge [riscv authdata_read]
-riscv authdata_write [expr $challenge + 1]
+riscv authdata_write [expr @{$challenge + 1@}]
@end example
@deffn {Command} {riscv authdata_read}
while other cores are free-running or remain halted, depending on the
scheduler-locking mode configured in GDB.
-@section Legacy SMP core switching support
-@quotation Note
-This method is deprecated in favor of the @emph{hwthread} pseudo RTOS.
-@end quotation
-
-For SMP support following GDB serial protocol packet have been defined :
-@itemize @bullet
-@item j - smp status request
-@item J - smp set request
-@end itemize
-
-OpenOCD implements :
-@itemize @bullet
-@item @option{jc} packet for reading core id displayed by
-GDB connection. Reply is @option{XXXXXXXX} (8 hex digits giving core id) or
- @option{E01} for target not smp.
-@item @option{JcXXXXXXXX} (8 hex digits) packet for setting core id displayed at next GDB continue
-(core id -1 is reserved for returning to normal resume mode). Reply @option{E01}
-for target not smp or @option{OK} on success.
-@end itemize
-
-Handling of this packet within GDB can be done :
-@itemize @bullet
-@item by the creation of an internal variable (i.e @option{_core}) by mean
-of function allocate_computed_value allowing following GDB command.
-@example
-set $_core 1
-#Jc01 packet is sent
-print $_core
-#jc packet is sent and result is affected in $
-@end example
-
-@item by the usage of GDB maintenance command as described in following example (2 cpus in SMP with
-core id 0 and 1 @pxref{definecputargetsworkinginsmp,,Define CPU targets working in SMP}).
-
-@example
-# toggle0 : force display of coreid 0
-define toggle0
-maint packet Jc0
-continue
-main packet Jc-1
-end
-# toggle1 : force display of coreid 1
-define toggle1
-maint packet Jc1
-continue
-main packet Jc-1
-end
-@end example
-@end itemize
-
@node Tcl Scripting API
@chapter Tcl Scripting API
@cindex Tcl Scripting API
By "low-level", we mean commands that a human would typically not
invoke directly.
-@itemize @bullet
-@item @b{mem2array} <@var{varname}> <@var{width}> <@var{addr}> <@var{nelems}>
-
-Read memory and return as a Tcl array for script processing
-@item @b{array2mem} <@var{varname}> <@var{width}> <@var{addr}> <@var{nelems}>
-
-Convert a Tcl array to memory locations and write the values
+@itemize
@item @b{flash banks} <@var{driver}> <@var{base}> <@var{size}> <@var{chip_width}> <@var{bus_width}> <@var{target}> [@option{driver options} ...]
Return information about the flash banks
@example
set x 6
set y 7
- puts [format "The answer: %d" [expr $x * $y]]
+ puts [format "The answer: %d" [expr @{$x * $y@}]]
@end example
@enumerate
@item The SET command creates 2 variables, X and Y.
@b{Dynamic variable creation}
@example
# Dynamically create a bunch of variables.
-for @{ set x 0 @} @{ $x < 32 @} @{ set x [expr $x + 1]@} @{
+for @{ set x 0 @} @{ $x < 32 @} @{ set x [expr @{$x + 1@}]@} @{
# Create var name
set vn [format "BIT%d" $x]
# Make it a global
global $vn
# Set it.
- set $vn [expr (1 << $x)]
+ set $vn [expr @{1 << $x@}]
@}
@end example
@b{Dynamic proc/command creation}
Code Review / openocd.git / blobdiff