Add flash support for SiFive's Freedom E platforms

[openocd.git] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 4b1a5de3d75f0c3994884d2a972a0c5f76836d70..bede1c8c9ec3fac63c3aa5f7b648dcf4aa215423 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -538,6 +538,12 @@ debuggers to ARM Cortex based targets @url{http://www.keil.com/support/man/docs/
 @item @b{TI XDS110 Debug Probe}
 @* The XDS110 is included as the embedded debug probe on many Texas Instruments
 LaunchPad evaluation boards.
+@* The XDS110 is also available as a stand-alone USB debug probe. The XDS110
+stand-alone probe has the additional ability to supply voltage to the target
+board via its AUX FUNCTIONS port. Use the
+@command{xds110_supply_voltage <millivolts>} command to set the voltage. 0 turns
+off the supply. Otherwise, the supply can be set to any value in the range 1800
+to 3600 millivolts.
 @* Link: @url{http://processors.wiki.ti.com/index.php/XDS110}
 @* Link: @url{http://processors.wiki.ti.com/index.php/XDS_Emulation_Software_Package#XDS110_Support_Utilities}
 @end itemize
@@ -5359,6 +5365,17 @@ flash bank flash2 ath79 0x20000000 0 0 0 $_TARGETNAME cs2
 
 @end deffn
 
+@deffn {Flash Driver} fespi
+@cindex Freedom E SPI
+@cindex fespi
+
+SiFive's Freedom E SPI controller, used in HiFive and other boards.
+
+@example
+flash bank $_FLASHNAME fespi 0x20000000 0 0 0 $_TARGETNAME
+@end example
+@end deffn
+
 @subsection Internal Flash (Microcontrollers)
 
 @deffn {Flash Driver} aduc702x