- update docs for new target_script events

[openocd.git] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index c9bbed7ce4d25443adf9f2f6c1c2334659e1e1a8..e2119d8fc8d360a99cb467d9ac2e8d7d9fb96425 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -562,9 +562,11 @@ unavailable for some time during startup (like the STR7 series), you can't use
 
 @item @b{target_script} <@var{target#}> <@var{event}> <@var{script_file}>
 @cindex target_script
-Event is either @option{reset}, @option{post_halt}, @option{pre_resume} or @option{gdb_program_config}
+Event is one of the following:
+@option{pre_reset}, @option{reset}, @option{post_reset}, @option{post_halt},
+@option{pre_resume} or @option{gdb_program_config}.
+@option{post_reset} and @option{reset} will produce the same results.
 
-TODO: describe exact semantic of events
 @item @b{run_and_halt_time} <@var{target#}> <@var{time_in_ms}>
 @cindex run_and_halt_time
 The amount of time the debugger should wait after releasing reset before it asserts
@@ -1030,6 +1032,16 @@ write stm32 option bytes.
 mass erase flash memory. 
 @end itemize
 
+@subsection Stellaris specific commands
+@cindex Stellaris specific commands
+ 
+These are flash specific commands when using the Stellaris driver.
+@itemize @bullet
+@item @b{stellaris mass_erase} <@var{num}>
+@cindex stellaris mass_erase
+mass erase flash memory. 
+@end itemize
+
 @page
 @section Architecture Specific Commands
 @cindex Architecture Specific Commands