@end deffn
@deffn {Flash Driver} lpc2000
-All members of the LPC11(x)00 and LPC1300 microcontroller families and most members
-of the LPC1700, LPC1800, LPC2000 and LPC4300 microcontroller families from NXP
-include internal flash and use Cortex-M0 (LPC11(x)00), Cortex-M3 (LPC1300, LPC1700,
-LPC1800), Cortex-M4 (LPC4300) or ARM7TDMI (LPC2000) cores.
+This is the driver to support internal flash of all members of the
+LPC11(x)00 and LPC1300 microcontroller families and most members of
+the LPC800, LPC1500, LPC1700, LPC1800, LPC2000, LPC4300 and LPC54100
+microcontroller families from NXP.
@quotation Note
There are LPC2000 devices which are not supported by the @var{lpc2000}
@option{lpc1700} (LPC175x and LPC176x)
@option{lpc4300} - available also as @option{lpc1800} alias (LPC18x[2357] and
LPC43x[2357])
+@option{lpc800} (LPC8xx)
@option{lpc1100} (LPC11(x)xx and LPC13xx)
+@option{lpc1500} (LPC15xx)
+@option{lpc54100} (LPC541xx)
or @option{auto} - automatically detects flash variant and size for LPC11(x)00,
-LPC1300 and LPC1700
+LPC8xx, LPC13xx and LPC17xx
@item @var{clock_kHz} ... the frequency, in kiloHertz,
at which the core is running
@item @option{calc_checksum} ... optional (but you probably want to provide this!),
@end deffn
@deffn {Flash Driver} stellaris
-All members of the Stellaris LM3Sxxx microcontroller family from
-Texas Instruments
-include internal flash and use ARM Cortex M3 cores.
-The driver automatically recognizes a number of these chips using
-the chip identification register, and autoconfigures itself.
+All members of the Stellaris LM3Sxxx, LM4x and Tiva C microcontroller
+families from Texas Instruments include internal flash. The driver
+automatically recognizes a number of these chips using the chip
+identification register, and autoconfigures itself.
@footnote{Currently there is a @command{stellaris mass_erase} command.
That seems pointless since the same effect can be had using the
standard @command{flash erase_address} command.}
works only for chips that do not have factory pre-programmed region 0
code.
@end deffn
+
+@deffn {Flash Driver} mrvlqspi
+This driver supports QSPI flash controller of Marvell's Wireless
+Microcontroller platform.
+
+The flash size is autodetected based on the table of known JEDEC IDs
+hardcoded in the OpenOCD sources.
+@end deffn
@end deffn
@section mFlash