+ /* enter CFI query mode
+ * according to JEDEC Standard No. 68.01,
+ * a single bus sequence with address = 0x55, data = 0x98 should put
+ * the device into CFI query mode.
+ *
+ * SST flashes clearly violate this, and we will consider them incompatbile for now
+ */
+ cfi_command(bank, 0x98, command);
+ if((retval = target->type->write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command)) != ERROR_OK)
+ {
+ return retval;
+ }
+
+ cfi_info->qry[0] = cfi_query_u8(bank, 0, 0x10);
+ cfi_info->qry[1] = cfi_query_u8(bank, 0, 0x11);
+ cfi_info->qry[2] = cfi_query_u8(bank, 0, 0x12);
+
+ LOG_DEBUG("CFI qry returned: 0x%2.2x 0x%2.2x 0x%2.2x", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2]);
+
+ if ((cfi_info->qry[0] != 'Q') || (cfi_info->qry[1] != 'R') || (cfi_info->qry[2] != 'Y'))
+ {
+ cfi_command(bank, 0xf0, command);
+ if((retval = target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ {
+ return retval;
+ }
+ cfi_command(bank, 0xff, command);
+ if((retval = target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
+ {
+ return retval;
+ }
+ LOG_ERROR("Could not probe bank: no QRY");
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ cfi_info->pri_id = cfi_query_u16(bank, 0, 0x13);
+ cfi_info->pri_addr = cfi_query_u16(bank, 0, 0x15);
+ cfi_info->alt_id = cfi_query_u16(bank, 0, 0x17);
+ cfi_info->alt_addr = cfi_query_u16(bank, 0, 0x19);
+
+ LOG_DEBUG("qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2], cfi_info->pri_id, cfi_info->pri_addr, cfi_info->alt_id, cfi_info->alt_addr);
+
+ cfi_info->vcc_min = cfi_query_u8(bank, 0, 0x1b);
+ cfi_info->vcc_max = cfi_query_u8(bank, 0, 0x1c);
+ cfi_info->vpp_min = cfi_query_u8(bank, 0, 0x1d);
+ cfi_info->vpp_max = cfi_query_u8(bank, 0, 0x1e);
+ cfi_info->word_write_timeout_typ = cfi_query_u8(bank, 0, 0x1f);
+ cfi_info->buf_write_timeout_typ = cfi_query_u8(bank, 0, 0x20);
+ cfi_info->block_erase_timeout_typ = cfi_query_u8(bank, 0, 0x21);
+ cfi_info->chip_erase_timeout_typ = cfi_query_u8(bank, 0, 0x22);
+ cfi_info->word_write_timeout_max = cfi_query_u8(bank, 0, 0x23);
+ cfi_info->buf_write_timeout_max = cfi_query_u8(bank, 0, 0x24);
+ cfi_info->block_erase_timeout_max = cfi_query_u8(bank, 0, 0x25);
+ cfi_info->chip_erase_timeout_max = cfi_query_u8(bank, 0, 0x26);
+
+ LOG_DEBUG("Vcc min: %1.1x.%1.1x, Vcc max: %1.1x.%1.1x, Vpp min: %1.1x.%1.1x, Vpp max: %1.1x.%1.1x",
+ (cfi_info->vcc_min & 0xf0) >> 4, cfi_info->vcc_min & 0x0f,
+ (cfi_info->vcc_max & 0xf0) >> 4, cfi_info->vcc_max & 0x0f,
+ (cfi_info->vpp_min & 0xf0) >> 4, cfi_info->vpp_min & 0x0f,
+ (cfi_info->vpp_max & 0xf0) >> 4, cfi_info->vpp_max & 0x0f);
+ LOG_DEBUG("typ. word write timeout: %u, typ. buf write timeout: %u, typ. block erase timeout: %u, typ. chip erase timeout: %u", 1 << cfi_info->word_write_timeout_typ, 1 << cfi_info->buf_write_timeout_typ,
+ 1 << cfi_info->block_erase_timeout_typ, 1 << cfi_info->chip_erase_timeout_typ);
+ LOG_DEBUG("max. word write timeout: %u, max. buf write timeout: %u, max. block erase timeout: %u, max. chip erase timeout: %u", (1 << cfi_info->word_write_timeout_max) * (1 << cfi_info->word_write_timeout_typ),
+ (1 << cfi_info->buf_write_timeout_max) * (1 << cfi_info->buf_write_timeout_typ),
+ (1 << cfi_info->block_erase_timeout_max) * (1 << cfi_info->block_erase_timeout_typ),
+ (1 << cfi_info->chip_erase_timeout_max) * (1 << cfi_info->chip_erase_timeout_typ));
+
+ cfi_info->dev_size = 1<<cfi_query_u8(bank, 0, 0x27);
+ cfi_info->interface_desc = cfi_query_u16(bank, 0, 0x28);
+ cfi_info->max_buf_write_size = cfi_query_u16(bank, 0, 0x2a);
+ cfi_info->num_erase_regions = cfi_query_u8(bank, 0, 0x2c);
+
+ LOG_DEBUG("size: 0x%x, interface desc: %i, max buffer write size: %x", cfi_info->dev_size, cfi_info->interface_desc, (1 << cfi_info->max_buf_write_size));
+
+ if (cfi_info->num_erase_regions)
+ {
+ cfi_info->erase_region_info = malloc(4 * cfi_info->num_erase_regions);
+ for (i = 0; i < cfi_info->num_erase_regions; i++)
+ {
+ cfi_info->erase_region_info[i] = cfi_query_u32(bank, 0, 0x2d + (4 * i));
+ LOG_DEBUG("erase region[%i]: %i blocks of size 0x%x", i, (cfi_info->erase_region_info[i] & 0xffff) + 1, (cfi_info->erase_region_info[i] >> 16) * 256);
+ }
+ }
+ else
+ {
+ cfi_info->erase_region_info = NULL;
+ }
+
+ /* We need to read the primary algorithm extended query table before calculating
+ * the sector layout to be able to apply fixups
+ */
+ switch(cfi_info->pri_id)
+ {
+ /* Intel command set (standard and extended) */
+ case 0x0001:
+ case 0x0003:
+ cfi_read_intel_pri_ext(bank);
+ break;
+ /* AMD/Spansion, Atmel, ... command set */
+ case 0x0002:
+ cfi_info->status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7; /* default for all CFI flashs */
+ cfi_read_0002_pri_ext(bank);
+ break;
+ default:
+ LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
+ break;
+ }
+
+ /* return to read array mode
+ * we use both reset commands, as some Intel flashes fail to recognize the 0xF0 command
+ */