#include "target.h"
#include "log.h"
-struct image_s;
+struct image;
#define FLASH_MAX_ERROR_STR (128)
* within a flash bank. A single bank typically consists of multiple
* sectors, each of which can be erased and protected independently.
*/
-typedef struct flash_sector_s
+struct flash_sector
{
/// Bus offset from start of the flash chip (in bytes).
uint32_t offset;
* @c flash_driver_s::protect_check.
*/
int is_protected;
-} flash_sector_t;
+};
-struct flash_bank_s;
+struct flash_bank;
#define __FLASH_BANK_COMMAND(name) \
- COMMAND_HELPER(name, struct flash_bank_s *bank)
+ COMMAND_HELPER(name, struct flash_bank *bank)
/**
* @brief Provides the implementation-independent structure that defines
* corresponding static <code>flash_driver_<i>callback</i>()</code>
* routine in flash.c.
*/
-typedef struct flash_driver_s
+struct flash_driver
{
/**
* Gives a human-readable name of this flash driver,
*
* @returns ERROR_OK if successful; otherwise, an error code.
*/
- int (*register_commands)(struct command_context_s *cmd_ctx);
+ int (*register_commands)(struct command_context *cmd_ctx);
/**
* Finish the "flash bank" command for @a bank. The
* @a bank parameter will have been filled in by the core flash
* layer when this routine is called, and the driver can store
- * additional information in its flash_bank_t::driver_priv field.
+ * additional information in its struct flash_bank::driver_priv field.
*
* The args are: @par
* @code
* @param last The number of the last sector to erase, typically N-1.
* @returns ERROR_OK if successful; otherwise, an error code.
*/
- int (*erase)(struct flash_bank_s *bank, int first, int last);
+ int (*erase)(struct flash_bank *bank, int first, int last);
/**
* Bank/sector protection routine (target-specific).
* @param last The last sector to (un)project, typically N-1.
* @returns ERROR_OK if successful; otherwise, an error code.
*/
- int (*protect)(struct flash_bank_s *bank, int set, int first, int last);
+ int (*protect)(struct flash_bank *bank, int set, int first, int last);
/**
* Program data into the flash. Note CPU address will be
* @param count The number of bytes to write.
* @returns ERROR_OK if successful; otherwise, an error code.
*/
- int (*write)(struct flash_bank_s *bank,
+ int (*write)(struct flash_bank *bank,
uint8_t *buffer, uint32_t offset, uint32_t count);
/**
* @param bank The bank to probe
* @returns ERROR_OK if successful; otherwise, an error code.
*/
- int (*probe)(struct flash_bank_s *bank);
+ int (*probe)(struct flash_bank *bank);
/**
* Check the erasure status of a flash bank.
* @param bank The bank to check
* @returns ERROR_OK if successful; otherwise, an error code.
*/
- int (*erase_check)(struct flash_bank_s *bank);
+ int (*erase_check)(struct flash_bank *bank);
/**
* Determine if the specific bank is "protected" or not.
* @param bank - the bank to check
* @returns ERROR_OK if successful; otherwise, an error code.
*/
- int (*protect_check)(struct flash_bank_s *bank);
+ int (*protect_check)(struct flash_bank *bank);
/**
* Display human-readable information about the flash
* @param buf_size - the size of the human buffer.
* @returns ERROR_OK if successful; otherwise, an error code.
*/
- int (*info)(struct flash_bank_s *bank, char *buf, int buf_size);
+ int (*info)(struct flash_bank *bank, char *buf, int buf_size);
/**
* A more gentle flavor of filash_driver_s::probe, performing
* @param bank - the bank to probe
* @returns ERROR_OK if successful; otherwise, an error code.
*/
- int (*auto_probe)(struct flash_bank_s *bank);
-} flash_driver_t;
+ int (*auto_probe)(struct flash_bank *bank);
+};
#define FLASH_BANK_COMMAND_HANDLER(name) static __FLASH_BANK_COMMAND(name)
* may use the @c driver_priv member to store additional data on a
* per-bank basis, if required.
*/
-typedef struct flash_bank_s
+struct flash_bank
{
- struct target_s *target; /**< Target to which this bank belongs. */
+ struct target *target; /**< Target to which this bank belongs. */
- flash_driver_t *driver; /**< Driver for this bank. */
+ struct flash_driver *driver; /**< Driver for this bank. */
void *driver_priv; /**< Private driver storage pointer */
int bank_number; /**< The 'bank' (or chip number) of this instance. */
*/
int num_sectors;
/// Array of sectors, allocated and initilized by the flash driver
- flash_sector_t *sectors;
+ struct flash_sector *sectors;
- struct flash_bank_s *next; /**< The next flash bank on this chip */
-} flash_bank_t;
+ struct flash_bank *next; /**< The next flash bank on this chip */
+};
/// Registers the 'flash' subsystem commands
-int flash_register_commands(struct command_context_s *cmd_ctx);
+int flash_register_commands(struct command_context *cmd_ctx);
/// Initializes the 'flash' subsystem drivers
-int flash_init_drivers(struct command_context_s *cmd_ctx);
+int flash_init_drivers(struct command_context *cmd_ctx);
/**
* Erases @a length bytes in the @a target flash, starting at @a addr.
* @returns ERROR_OK if successful; otherwise, an error code.
*/
-int flash_erase_address_range(struct target_s *target,
+int flash_erase_address_range(struct target *target,
uint32_t addr, uint32_t length);
/**
* Writes @a image into the @a target flash. The @a written parameter
* erase the corresponding banks or sectors before programming.
* @returns ERROR_OK if successful; otherwise, an error code.
*/
-int flash_write(struct target_s *target,
- struct image_s *image, uint32_t *written, int erase);
+int flash_write(struct target *target,
+ struct image *image, uint32_t *written, int erase);
/**
* Forces targets to re-examine their erase/protection state.
* This routine must be called when the system may modify the status.
* this routine will call default_flash_mem_blank_check() to confirm.
* @returns ERROR_OK if successful; otherwise, an error code.
*/
-int default_flash_blank_check(struct flash_bank_s *bank);
+int default_flash_blank_check(struct flash_bank *bank);
/**
* Provides a default blank flash memory check. Ensures the contents
* of the given bank have truly been erased.
* @param bank The flash bank.
* @returns ERROR_OK if successful; otherwise, an error code.
*/
-int default_flash_mem_blank_check(struct flash_bank_s *bank);
+int default_flash_mem_blank_check(struct flash_bank *bank);
/**
* Returns a flash bank by the specified flash_bank_s bank_number, @a num.
* @param num The flash bank number.
- * @returns A flash_bank_t for flash bank @a num, or NULL
+ * @returns A struct flash_bank for flash bank @a num, or NULL
*/
-flash_bank_t *get_flash_bank_by_num(int num);
+struct flash_bank *get_flash_bank_by_num(int num);
/**
* Retreives @a bank from a command argument, reporting errors parsing
* the bank identifier or retreiving the specified bank.
* @param bank On output, contians a pointer to the bank or NULL.
* @returns ERROR_OK on success, or an error indicating the problem.
*/
-int flash_command_get_bank_by_num(struct command_context_s *cmd_ctx,
- const char *str, flash_bank_t **bank);
+int flash_command_get_bank_by_num(struct command_context *cmd_ctx,
+ const char *str, struct flash_bank **bank);
/**
* Returns the flash bank like get_flash_bank_by_num(), without probing.
* @param num The flash bank number.
- * @returns A flash_bank_t for flash bank @a num, or NULL.
+ * @returns A struct flash_bank for flash bank @a num, or NULL.
*/
-flash_bank_t *get_flash_bank_by_num_noprobe(int num);
+struct flash_bank *get_flash_bank_by_num_noprobe(int num);
/**
* Returns the flash bank located at a specified address.
* @param target The target, presumed to contain one or more banks.
* @param addr An address that is within the range of the bank.
- * @returns The flash_bank_t located at @a addr, or NULL.
+ * @returns The struct flash_bank located at @a addr, or NULL.
*/
-flash_bank_t *get_flash_bank_by_addr(struct target_s *target, uint32_t addr);
+struct flash_bank *get_flash_bank_by_addr(struct target *target, uint32_t addr);
#define ERROR_FLASH_BANK_INVALID (-900)
#define ERROR_FLASH_SECTOR_INVALID (-901)
Code Review / openocd.git / blobdiff