kinetis flash: use longword write when writing into pflash
[openocd.git] / src / flash / nand / orion.c
index 0f08fe42bec73156cedf58c41fbbfcb9bdc41308..5b0c9642f1843f0f8e276539d492ba8e8640400e 100644 (file)
 #include "config.h"
 #endif
 
-#include "arm_nandio.h"
-#include <target/armv4_5.h>
+#include "imp.h"
+#include "arm_io.h"
+#include <target/arm.h>
 
 
 struct orion_nand_controller
 {
-       struct target   *target;
-
        struct arm_nand_data    io;
 
        uint32_t                cmd;
@@ -52,7 +51,7 @@ struct orion_nand_controller
 static int orion_nand_command(struct nand_device *nand, uint8_t command)
 {
        struct orion_nand_controller *hw = nand->controller_priv;
-       struct target *target = hw->target;
+       struct target *target = nand->target;
 
        CHECK_HALTED;
        target_write_u8(target, hw->cmd, command);
@@ -62,7 +61,7 @@ static int orion_nand_command(struct nand_device *nand, uint8_t command)
 static int orion_nand_address(struct nand_device *nand, uint8_t address)
 {
        struct orion_nand_controller *hw = nand->controller_priv;
-       struct target *target = hw->target;
+       struct target *target = nand->target;
 
        CHECK_HALTED;
        target_write_u8(target, hw->addr, address);
@@ -72,7 +71,7 @@ static int orion_nand_address(struct nand_device *nand, uint8_t address)
 static int orion_nand_read(struct nand_device *nand, void *data)
 {
        struct orion_nand_controller *hw = nand->controller_priv;
-       struct target *target = hw->target;
+       struct target *target = nand->target;
 
        CHECK_HALTED;
        target_read_u8(target, hw->data, data);
@@ -82,7 +81,7 @@ static int orion_nand_read(struct nand_device *nand, void *data)
 static int orion_nand_write(struct nand_device *nand, uint16_t data)
 {
        struct orion_nand_controller *hw = nand->controller_priv;
-       struct target *target = hw->target;
+       struct target *target = nand->target;
 
        CHECK_HALTED;
        target_write_u8(target, hw->data, data);
@@ -115,11 +114,6 @@ static int orion_nand_reset(struct nand_device *nand)
        return orion_nand_command(nand, NAND_CMD_RESET);
 }
 
-static int orion_nand_controller_ready(struct nand_device *nand, int timeout)
-{
-       return 1;
-}
-
 NAND_DEVICE_COMMAND_HANDLER(orion_nand_device_command)
 {
        struct orion_nand_controller *hw;
@@ -127,23 +121,17 @@ NAND_DEVICE_COMMAND_HANDLER(orion_nand_device_command)
        uint8_t ale, cle;
 
        if (CMD_ARGC != 3) {
-               LOG_ERROR("arguments must be: <target_id> <NAND_address>\n");
+               LOG_ERROR("arguments must be: <target_id> <NAND_address>");
                return ERROR_NAND_DEVICE_INVALID;
        }
 
        hw = calloc(1, sizeof(*hw));
        if (!hw) {
-               LOG_ERROR("no memory for nand controller\n");
+               LOG_ERROR("no memory for nand controller");
                return ERROR_NAND_DEVICE_INVALID;
        }
 
        nand->controller_priv = hw;
-       hw->target = get_target(CMD_ARGV[1]);
-       if (!hw->target) {
-               LOG_ERROR("target '%s' not defined", CMD_ARGV[1]);
-               free(hw);
-               return ERROR_NAND_DEVICE_INVALID;
-       }
 
        COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], base);
        cle = 0;
@@ -153,8 +141,9 @@ NAND_DEVICE_COMMAND_HANDLER(orion_nand_device_command)
        hw->cmd = base + (1 << cle);
        hw->addr = base + (1 << ale);
 
-       hw->io.target = hw->target;
+       hw->io.target = nand->target;
        hw->io.data = hw->data;
+       hw->io.op = ARM_NAND_NONE;
 
        return ERROR_OK;
 }
@@ -173,7 +162,6 @@ struct nand_flash_controller orion_nand_controller =
        .write_data             = orion_nand_write,
        .write_block_data       = orion_nand_fast_block_write,
        .reset                  = orion_nand_reset,
-       .controller_ready       = orion_nand_controller_ready,
        .nand_device_command    = orion_nand_device_command,
        .init                   = orion_nand_init,
 };

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)