* You should have received a copy of the GNU General public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
****************************************************************************/
/* Some of the the lower level code was based on code supplied by
#define REG_NAME_WIDTH (12)
-/* at91sam4s series (has always one flash bank)*/
+/* at91sam4s/at91sam4e series (has always one flash bank)*/
#define FLASH_BANK_BASE_S 0x00400000
+/* at91sam4sd series (two one flash banks), first bank address */
+#define FLASH_BANK0_BASE_SD FLASH_BANK_BASE_S
+/* at91sam4sd16x, second bank address */
+#define FLASH_BANK1_BASE_1024K_SD (FLASH_BANK0_BASE_SD+(1024*1024/2))
+/* at91sam4sd32x, second bank address */
+#define FLASH_BANK1_BASE_2048K_SD (FLASH_BANK0_BASE_SD+(2048*1024/2))
+
#define AT91C_EFC_FCMD_GETD (0x0) /* (EFC) Get Flash Descriptor */
#define AT91C_EFC_FCMD_WP (0x1) /* (EFC) Write Page */
#define AT91C_EFC_FCMD_WPL (0x2) /* (EFC) Write Page and Lock */
#define AT91C_EFC_FCMD_EWP (0x3) /* (EFC) Erase Page and Write Page */
-#define AT91C_EFC_FCMD_EWPL (0x4) /* (EFC) Erase Page and Write Page
- * then Lock */
+#define AT91C_EFC_FCMD_EWPL (0x4) /* (EFC) Erase Page and Write Page then Lock */
#define AT91C_EFC_FCMD_EA (0x5) /* (EFC) Erase All */
-/* cmd6 is not present int he at91sam4u4/2/1 data sheet table 19-2 */
+/* cmd6 is not present in the at91sam4u4/2/1 data sheet table 19-2 */
/* #define AT91C_EFC_FCMD_EPL (0x6) // (EFC) Erase plane? */
#define AT91C_EFC_FCMD_EPA (0x7) /* (EFC) Erase pages */
#define AT91C_EFC_FCMD_SLB (0x8) /* (EFC) Set Lock Bit */
/* so we can find the chip we belong to */
struct sam4_chip *pChip;
- /* so we can find the orginal bank pointer */
+ /* so we can find the original bank pointer */
struct flash_bank *pBank;
unsigned bank_number;
uint32_t controller_address;
struct sam4_chip_details {
/* THERE ARE DRAGONS HERE.. */
/* note: If you add pointers here */
- /* becareful about them as they */
+ /* be careful about them as they */
/* may need to be updated inside */
/* the function: "sam4_GetDetails() */
/* which copy/overwrites the */
}
/*The actual sector size of the SAM4S flash memory is 65536 bytes. 16 sectors for a 1024KB device*/
-/*The lockregions are 8KB per lock reqion, with a 1024KB device having 128 lock reqions. */
+/*The lockregions are 8KB per lock region, with a 1024KB device having 128 lock regions. */
/*For the best results, nsectors are thus set to the amount of lock regions, and the sector_size*/
/*set to the lock region size. Page erases are used to erase 8KB sections when programming*/
/* these are used to *initialize* the "pChip->details" structure. */
static const struct sam4_chip_details all_sam4_details[] = {
+
+ /* Start at91sam4e* series */
+ /*atsam4e16e - LQFP144/LFBGA144*/
+ {
+ .chipid_cidr = 0xA3CC0CE0,
+ .name = "at91sam4e16e",
+ .total_flash_size = 1024 * 1024,
+ .total_sram_size = 128 * 1024,
+ .n_gpnvms = 2,
+ .n_banks = 1,
+ {
+/* .bank[0] = {*/
+ {
+ .probed = 0,
+ .pChip = NULL,
+ .pBank = NULL,
+ .bank_number = 0,
+ .base_address = FLASH_BANK_BASE_S,
+ .controller_address = 0x400e0a00,
+ .flash_wait_states = 6, /* workaround silicon bug */
+ .present = 1,
+ .size_bytes = 1024 * 1024,
+ .nsectors = 128,
+ .sector_size = 8192,
+ .page_size = 512,
+ },
+/* .bank[1] = {*/
+ {
+ .present = 0,
+ .probed = 0,
+ .bank_number = 1,
+
+ },
+ },
+ },
+
/* Start at91sam4s* series */
/*atsam4s16c - LQFP100/BGA100*/
{
},
},
},
+
+ /*at91sam4sd32c*/
+ {
+ .chipid_cidr = 0x29a70ee0,
+ .name = "at91sam4sd32c",
+ .total_flash_size = 2048 * 1024,
+ .total_sram_size = 160 * 1024,
+ .n_gpnvms = 3,
+ .n_banks = 2,
+
+/* .bank[0] = { */
+ {
+ {
+ .probed = 0,
+ .pChip = NULL,
+ .pBank = NULL,
+ .bank_number = 0,
+ .base_address = FLASH_BANK0_BASE_SD,
+ .controller_address = 0x400e0a00,
+ .flash_wait_states = 6, /* workaround silicon bug */
+ .present = 1,
+ .size_bytes = 1024 * 1024,
+ .nsectors = 128,
+ .sector_size = 8192,
+ .page_size = 512,
+ },
+
+/* .bank[1] = { */
+ {
+ .probed = 0,
+ .pChip = NULL,
+ .pBank = NULL,
+ .bank_number = 1,
+ .base_address = FLASH_BANK1_BASE_2048K_SD,
+ .controller_address = 0x400e0c00,
+ .flash_wait_states = 6, /* workaround silicon bug */
+ .present = 1,
+ .size_bytes = 1024 * 1024,
+ .nsectors = 128,
+ .sector_size = 8192,
+ .page_size = 512,
+ },
+ },
+ },
+
+ /* at91samg53n19 */
+ {
+ .chipid_cidr = 0x247e0ae0,
+ .name = "at91samg53n19",
+ .total_flash_size = 512 * 1024,
+ .total_sram_size = 96 * 1024,
+ .n_gpnvms = 2,
+ .n_banks = 1,
+
+/* .bank[0] = {*/
+ {
+ {
+ .probed = 0,
+ .pChip = NULL,
+ .pBank = NULL,
+ .bank_number = 0,
+ .base_address = FLASH_BANK_BASE_S,
+ .controller_address = 0x400e0a00,
+ .flash_wait_states = 6, /* workaround silicon bug */
+ .present = 1,
+ .size_bytes = 512 * 1024,
+ .nsectors = 64,
+ .sector_size = 8192,
+ .page_size = 512,
+ },
+/* .bank[1] = {*/
+ {
+ .present = 0,
+ .probed = 0,
+ .bank_number = 1,
+
+ },
+ }
+ },
+
/* terminate */
{
.chipid_cidr = 0,
break;
}
+ /* AT91C_EFC_FCMD_EPA
+ * According to the datasheet FARG[15:2] defines the page from which
+ * the erase will start.This page must be modulo 4, 8, 16 or 32
+ * according to the number of pages to erase. FARG[1:0] defines the
+ * number of pages to be erased. Previously (firstpage << 2) was used
+ * to conform to this, seems it should not be shifted...
+ */
return EFC_PerformCommand(pPrivate,
/* send Erase Page */
AT91C_EFC_FCMD_EPA,
- (firstPage << 2) | erasePages,
+ (firstPage) | erasePages,
status);
}
}
/* show the basics */
- LOG_USER_N("\t%*s: %*d [0x%0*x] ",
+ LOG_USER_N("\t%*s: %*" PRId32 " [0x%0*" PRIx32 "] ",
REG_NAME_WIDTH, regname,
dwidth, v,
hwidth, v);
{ 0x37, "CAP7 Series" },
{ 0x39, "CAP9 Series" },
{ 0x3B, "CAP11 Series" },
+ { 0x3C, "ATSAM4E" },
{ 0x40, "AT91x40 Series" },
{ 0x42, "AT91x42 Series" },
+ { 0x43, "SAMG51 Series"
+ },
+ { 0x47, "SAMG53 Series"
+ },
{ 0x55, "AT91x55 Series" },
{ 0x60, "AT91SAM7Axx Series" },
{ 0x61, "AT91SAM7AQxx Series" },
v = (v * pChip->cfg.slow_freq) / 16;
pChip->cfg.mainosc_freq = v;
- LOG_USER("(%3.03f Mhz (%d.%03dkhz slowclk)",
+ LOG_USER("(%3.03f Mhz (%" PRIu32 ".%03" PRIu32 "khz slowclk)",
_tomhz(v),
- pChip->cfg.slow_freq / 1000,
- pChip->cfg.slow_freq % 1000);
+ (uint32_t)(pChip->cfg.slow_freq / 1000),
+ (uint32_t)(pChip->cfg.slow_freq % 1000));
}
static void sam4_explain_ckgr_plla(struct sam4_chip *pChip)
LOG_USER("\tPLLA Freq: (Disabled,mula = 0)");
else if (diva == 0)
LOG_USER("\tPLLA Freq: (Disabled,diva = 0)");
- else if (diva == 1) {
- pChip->cfg.plla_freq = (pChip->cfg.mainosc_freq * (mula + 1));
+ else if (diva >= 1) {
+ pChip->cfg.plla_freq = (pChip->cfg.mainosc_freq * (mula + 1) / diva);
LOG_USER("\tPLLA Freq: %3.03f MHz",
_tomhz(pChip->cfg.plla_freq));
}
static struct sam4_bank_private *get_sam4_bank_private(struct flash_bank *bank)
{
- return (struct sam4_bank_private *)(bank->driver_priv);
+ return bank->driver_priv;
}
/**
r = sam4_ReadThisReg(pChip,
sam4_get_reg_ptr(&(pChip->cfg), pReg));
if (r != ERROR_OK) {
- LOG_ERROR("Cannot read SAM4 registere: %s @ 0x%08x, Error: %d",
+ LOG_ERROR("Cannot read SAM4 register: %s @ 0x%08x, Error: %d",
pReg->name, ((unsigned)(pReg->address)), r);
return r;
}
/* display all regs */
LOG_DEBUG("Start: %s", pReg->name);
regval = *sam4_get_reg_ptr(&(pChip->cfg), pReg);
- LOG_USER("%*s: [0x%08x] -> 0x%08x",
+ LOG_USER("%*s: [0x%08" PRIx32 "] -> 0x%08" PRIx32,
REG_NAME_WIDTH,
pReg->name,
pReg->address,
LOG_USER(" cpu-freq: %3.03f MHz", _tomhz(pChip->cfg.cpu_freq));
LOG_USER("mclk-freq: %3.03f MHz", _tomhz(pChip->cfg.mclk_freq));
- LOG_USER(" UniqueId: 0x%08x 0x%08x 0x%08x 0x%08x",
+ LOG_USER(" UniqueId: 0x%08" PRIx32 " 0x%08" PRIx32 " 0x%08" PRIx32 " 0x%08"PRIx32,
pChip->cfg.unique_id[0],
pChip->cfg.unique_id[1],
pChip->cfg.unique_id[2],
switch (bank->base) {
default:
LOG_ERROR("Address 0x%08x invalid bank address (try 0x%08x"
- "[at91sam4s series] )",
- ((unsigned int)(bank->base)),
- ((unsigned int)(FLASH_BANK_BASE_S)));
+ "[at91sam4s series] )",
+ ((unsigned int)(bank->base)),
+ ((unsigned int)(FLASH_BANK_BASE_S)));
return ERROR_FAIL;
break;
/* at91sam4s series only has bank 0*/
+ /* at91sam4sd series has the same address for bank 0 (FLASH_BANK0_BASE_SD)*/
case FLASH_BANK_BASE_S:
bank->driver_priv = &(pChip->details.bank[0]);
bank->bank_number = 0;
pChip->details.bank[0].pChip = pChip;
pChip->details.bank[0].pBank = bank;
break;
+
+ /* Bank 1 of at91sam4sd series */
+ case FLASH_BANK1_BASE_1024K_SD:
+ case FLASH_BANK1_BASE_2048K_SD:
+ bank->driver_priv = &(pChip->details.bank[1]);
+ bank->bank_number = 1;
+ pChip->details.bank[1].pChip = pChip;
+ pChip->details.bank[1].pBank = bank;
+ break;
}
/* we initialize after probing. */
LOG_ERROR("SAM4 ChipID 0x%08x not found in table (perhaps you can ID this chip?)",
(unsigned int)(pPrivate->pChip->cfg.CHIPID_CIDR));
/* Help the victim, print details about the chip */
- LOG_INFO("SAM4 CHIPID_CIDR: 0x%08x decodes as follows",
+ LOG_INFO("SAM4 CHIPID_CIDR: 0x%08" PRIx32 " decodes as follows",
pPrivate->pChip->cfg.CHIPID_CIDR);
sam4_explain_chipid_cidr(pPrivate->pChip);
return ERROR_FAIL;
LOG_DEBUG("Here");
return FLASHD_EraseEntireBank(pPrivate);
}
- LOG_INFO("sam4 does not auto-erase while programing (Erasing relevant sectors)");
+ LOG_INFO("sam4 does not auto-erase while programming (Erasing relevant sectors)");
LOG_INFO("sam4 First: 0x%08x Last: 0x%08x", (unsigned int)(first), (unsigned int)(last));
for (i = first; i <= last; i++) {
/*16 pages equals 8KB - Same size as a lock region*/
LOG_ERROR("SAM4: Error performing Erase page @ lock region number %d",
(unsigned int)(i));
if (status & (1 << 2)) {
- LOG_ERROR("SAM4: Lock Reqion %d is locked", (unsigned int)(i));
+ LOG_ERROR("SAM4: Lock Region %d is locked", (unsigned int)(i));
return ERROR_FAIL;
}
if (status & (1 << 1)) {
}
-static int sam4_info(struct flash_bank *bank, char *buf, int buf_size)
-{
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
- buf[0] = 0;
- return ERROR_OK;
-}
-
static int sam4_page_read(struct sam4_bank_private *pPrivate, unsigned pagenum, uint8_t *buf)
{
uint32_t adr;
return r;
}
-/* The code below is basically this: */
-/* compiled with */
-/* arm-none-eabi-gcc -mthumb -mcpu = cortex-m3 -O9 -S ./foobar.c -o foobar.s */
-/* */
-/* Only the *CPU* can write to the flash buffer. */
-/* the DAP cannot... so - we download this 28byte thing */
-/* Run the algorithm - (below) */
-/* to program the device */
-/* */
-/* ======================================== */
-/* #include <stdint.h> */
-/* */
-/* struct foo { */
-/* uint32_t *dst; */
-/* const uint32_t *src; */
-/* int n; */
-/* volatile uint32_t *base; */
-/* uint32_t cmd; */
-/* }; */
-/* */
-/* */
-/* uint32_t sam4_function(struct foo *p) */
-/* { */
-/* volatile uint32_t *v; */
-/* uint32_t *d; */
-/* const uint32_t *s; */
-/* int n; */
-/* uint32_t r; */
-/* */
-/* d = p->dst; */
-/* s = p->src; */
-/* n = p->n; */
-/* */
-/* do { */
-/* *d++ = *s++; */
-/* } while (--n) */
-/* ; */
-/* */
-/* v = p->base; */
-/* */
-/* v[ 1 ] = p->cmd; */
-/* do { */
-/* r = v[8/4]; */
-/* } while (!(r&1)) */
-/* ; */
-/* return r; */
-/* } */
-/* ======================================== */
-
-static const uint8_t
- sam4_page_write_opcodes[] = {
- /* 24 0000 0446 mov r4, r0 */
- 0x04, 0x46,
- /* 25 0002 6168 ldr r1, [r4, #4] */
- 0x61, 0x68,
- /* 26 0004 0068 ldr r0, [r0, #0] */
- 0x00, 0x68,
- /* 27 0006 A268 ldr r2, [r4, #8] */
- 0xa2, 0x68,
- /* 28 @ lr needed for prologue */
- /* 29 .L2: */
- /* 30 0008 51F8043B ldr r3, [r1], #4 */
- 0x51, 0xf8, 0x04, 0x3b,
- /* 31 000c 12F1FF32 adds r2, r2, #-1 */
- 0x12, 0xf1, 0xff, 0x32,
- /* 32 0010 40F8043B str r3, [r0], #4 */
- 0x40, 0xf8, 0x04, 0x3b,
- /* 33 0014 F8D1 bne .L2 */
- 0xf8, 0xd1,
- /* 34 0016 E268 ldr r2, [r4, #12] */
- 0xe2, 0x68,
- /* 35 0018 2369 ldr r3, [r4, #16] */
- 0x23, 0x69,
- /* 36 001a 5360 str r3, [r2, #4] */
- 0x53, 0x60,
- /* 37 001c 0832 adds r2, r2, #8 */
- 0x08, 0x32,
- /* 38 .L4: */
- /* 39 001e 1068 ldr r0, [r2, #0] */
- 0x10, 0x68,
- /* 40 0020 10F0010F tst r0, #1 */
- 0x10, 0xf0, 0x01, 0x0f,
- /* 41 0024 FBD0 beq .L4 */
- 0xfb, 0xd0,
- 0x00, 0xBE /* bkpt #0 */
-};
-
-static int sam4_page_write(struct sam4_bank_private *pPrivate, unsigned pagenum, uint8_t *buf)
+static int sam4_page_write(struct sam4_bank_private *pPrivate, unsigned pagenum, const uint8_t *buf)
{
uint32_t adr;
uint32_t status;
}
static int sam4_write(struct flash_bank *bank,
- uint8_t *buffer,
+ const uint8_t *buffer,
uint32_t offset,
uint32_t count)
{
.auto_probe = sam4_auto_probe,
.erase_check = default_flash_blank_check,
.protect_check = sam4_protect_check,
- .info = sam4_info,
};
Code Review / openocd.git / blobdiff