helper/command: change prototype of command_print/command_print_sameline

[openocd.git] / src / flash / nor / at91samd.c

diff --git a/src/flash/nor/at91samd.c b/src/flash/nor/at91samd.c
index c325194edeecde36f2f517e06f067038adbc29a5..b6cff9a6726170a18f31aa4ed4a7efb839958163 100644 (file)
--- a/src/flash/nor/at91samd.c
+++ b/src/flash/nor/at91samd.c
@@ -947,9 +947,9 @@ COMMAND_HANDLER(samd_handle_chip_erase_command)
                 * perform the erase. */
                res = target_write_u8(target, SAMD_DSU + SAMD_DSU_CTRL_EXT, (1<<4));
                if (res == ERROR_OK)
-                       command_print(CMD_CTX, "chip erase started");
+                       command_print(CMD, "chip erase started");
                else
-                       command_print(CMD_CTX, "write to DSU CTRL failed");
+                       command_print(CMD, "write to DSU CTRL failed");
        }
 
        return res;
@@ -961,7 +961,7 @@ COMMAND_HANDLER(samd_handle_set_security_command)
        struct target *target = get_current_target(CMD_CTX);
 
        if (CMD_ARGC < 1 || (CMD_ARGC >= 1 && (strcmp(CMD_ARGV[0], "enable")))) {
-               command_print(CMD_CTX, "supply the \"enable\" argument to proceed.");
+               command_print(CMD, "supply the \"enable\" argument to proceed.");
                return ERROR_COMMAND_SYNTAX_ERROR;
        }
 
@@ -975,9 +975,9 @@ COMMAND_HANDLER(samd_handle_set_security_command)
 
                /* Check (and clear) error conditions */
                if (res == ERROR_OK)
-                       command_print(CMD_CTX, "chip secured on next power-cycle");
+                       command_print(CMD, "chip secured on next power-cycle");
                else
-                       command_print(CMD_CTX, "failed to secure chip");
+                       command_print(CMD, "failed to secure chip");
        }
 
        return res;
@@ -1008,7 +1008,7 @@ COMMAND_HANDLER(samd_handle_eeprom_command)
                                }
 
                                if (code > 6) {
-                                       command_print(CMD_CTX, "Invalid EEPROM size.  Please see "
+                                       command_print(CMD, "Invalid EEPROM size.  Please see "
                                                        "datasheet for a list valid sizes.");
                                        return ERROR_COMMAND_SYNTAX_ERROR;
                                }
@@ -1022,10 +1022,10 @@ COMMAND_HANDLER(samd_handle_eeprom_command)
                                uint32_t size = ((val >> 4) & 0x7); /* grab size code */
 
                                if (size == 0x7)
-                                       command_print(CMD_CTX, "EEPROM is disabled");
+                                       command_print(CMD, "EEPROM is disabled");
                                else {
                                        /* Otherwise, 6 is 256B, 0 is 16KB */
-                                       command_print(CMD_CTX, "EEPROM size is %u bytes",
+                                       command_print(CMD, "EEPROM size is %u bytes",
                                                        (2 << (13 - size)));
                                }
                        }
@@ -1038,7 +1038,7 @@ COMMAND_HANDLER(samd_handle_eeprom_command)
 static COMMAND_HELPER(get_u64_from_hexarg, unsigned int num, uint64_t *value)
 {
        if (num >= CMD_ARGC) {
-               command_print(CMD_CTX, "Too few Arguments.");
+               command_print(CMD, "Too few Arguments.");
                return ERROR_COMMAND_SYNTAX_ERROR;
        }
 
@@ -1049,12 +1049,12 @@ static COMMAND_HELPER(get_u64_from_hexarg, unsigned int num, uint64_t *value)
                *value = strtoull(&(CMD_ARGV[num][2]), &check, 16);
                if ((value == 0 && errno == ERANGE) ||
                        check == NULL || *check != 0) {
-                       command_print(CMD_CTX, "Invalid 64-bit hex value in argument %d.",
+                       command_print(CMD, "Invalid 64-bit hex value in argument %d.",
                                num + 1);
                        return ERROR_COMMAND_SYNTAX_ERROR;
                }
        } else {
-               command_print(CMD_CTX, "Argument %d needs to be a hex value.", num + 1);
+               command_print(CMD, "Argument %d needs to be a hex value.", num + 1);
                return ERROR_COMMAND_SYNTAX_ERROR;
        }
        return ERROR_OK;
@@ -1067,7 +1067,7 @@ COMMAND_HANDLER(samd_handle_nvmuserrow_command)
 
        if (target) {
                if (CMD_ARGC > 2) {
-                       command_print(CMD_CTX, "Too much Arguments given.");
+                       command_print(CMD, "Too much Arguments given.");
                        return ERROR_COMMAND_SYNTAX_ERROR;
                }
 
@@ -1105,7 +1105,7 @@ COMMAND_HANDLER(samd_handle_nvmuserrow_command)
                uint64_t value;
                res = read_userrow(target, &value);
                if (res == ERROR_OK)
-                       command_print(CMD_CTX, "NVMUSERROW: 0x%016"PRIX64, value);
+                       command_print(CMD, "NVMUSERROW: 0x%016"PRIX64, value);
                else
                        LOG_ERROR("NVMUSERROW could not be read.");
        }
@@ -1145,7 +1145,7 @@ COMMAND_HANDLER(samd_handle_bootloader_command)
                                }
 
                                if (code > 6) {
-                                       command_print(CMD_CTX, "Invalid bootloader size.  Please "
+                                       command_print(CMD, "Invalid bootloader size.  Please "
                                                        "see datasheet for a list valid sizes.");
                                        return ERROR_COMMAND_SYNTAX_ERROR;
                                }
@@ -1166,7 +1166,7 @@ COMMAND_HANDLER(samd_handle_bootloader_command)
                                        nb = (2 << (8 - size)) * page_size;
 
                                /* There are 4 pages per row */
-                               command_print(CMD_CTX, "Bootloader size is %" PRIu32 " bytes (%" PRIu32 " rows)",
+                               command_print(CMD, "Bootloader size is %" PRIu32 " bytes (%" PRIu32 " rows)",
                                           nb, (uint32_t)(nb / (page_size * 4)));
                        }
                }