#endif
#include "imp.h"
+#include "helper/binarybuffer.h"
#define SAMD_NUM_SECTORS 16
+#define SAMD_PAGE_SIZE_MAX 1024
-#define SAMD_FLASH 0x00000000 /* physical Flash memory */
+#define SAMD_FLASH ((uint32_t)0x00000000) /* physical Flash memory */
+#define SAMD_USER_ROW ((uint32_t)0x00804000) /* User Row of Flash */
+#define SAMD_PAC1 0x41000000 /* Peripheral Access Control 1 */
#define SAMD_DSU 0x41002000 /* Device Service Unit */
#define SAMD_NVMCTRL 0x41004000 /* Non-volatile memory controller */
/* Known identifiers */
#define SAMD_PROCESSOR_M0 0x01
#define SAMD_FAMILY_D 0x00
+#define SAMD_FAMILY_L 0x01
+#define SAMD_FAMILY_C 0x02
#define SAMD_SERIES_20 0x00
#define SAMD_SERIES_21 0x01
+#define SAMD_SERIES_10 0x02
+#define SAMD_SERIES_11 0x03
struct samd_part {
uint8_t id;
uint32_t ram_kb;
};
+/* Known SAMD10 parts */
+static const struct samd_part samd10_parts[] = {
+ { 0x0, "SAMD10D14AMU", 16, 4 },
+ { 0x1, "SAMD10D13AMU", 8, 4 },
+ { 0x2, "SAMD10D12AMU", 4, 4 },
+ { 0x3, "SAMD10D14ASU", 16, 4 },
+ { 0x4, "SAMD10D13ASU", 8, 4 },
+ { 0x5, "SAMD10D12ASU", 4, 4 },
+ { 0x6, "SAMD10C14A", 16, 4 },
+ { 0x7, "SAMD10C13A", 8, 4 },
+ { 0x8, "SAMD10C12A", 4, 4 },
+};
+
+/* Known SAMD11 parts */
+static const struct samd_part samd11_parts[] = {
+ { 0x0, "SAMD11D14AMU", 16, 4 },
+ { 0x1, "SAMD11D13AMU", 8, 4 },
+ { 0x2, "SAMD11D12AMU", 4, 4 },
+ { 0x3, "SAMD11D14ASU", 16, 4 },
+ { 0x4, "SAMD11D13ASU", 8, 4 },
+ { 0x5, "SAMD11D12ASU", 4, 4 },
+ { 0x6, "SAMD11C14A", 16, 4 },
+ { 0x7, "SAMD11C13A", 8, 4 },
+ { 0x8, "SAMD11C12A", 4, 4 },
+};
+
/* Known SAMD20 parts. See Table 12-8 in 42129F–SAM–10/2013 */
static const struct samd_part samd20_parts[] = {
{ 0x0, "SAMD20J18A", 256, 32 },
{ 0x7, "SAMD20G16A", 64, 8 },
{ 0x8, "SAMD20G15A", 32, 4 },
{ 0x9, "SAMD20G14A", 16, 2 },
+ { 0xA, "SAMD20E18A", 256, 32 },
{ 0xB, "SAMD20E17A", 128, 16 },
{ 0xC, "SAMD20E16A", 64, 8 },
{ 0xD, "SAMD20E15A", 32, 4 },
{ 0xE, "SAMD21E14A", 16, 2 },
};
+/* Known SAMR21 parts. */
+static const struct samd_part samr21_parts[] = {
+ { 0x19, "SAMR21G18A", 256, 32 },
+ { 0x1A, "SAMR21G17A", 128, 32 },
+ { 0x1B, "SAMR21G16A", 64, 32 },
+ { 0x1C, "SAMR21E18A", 256, 32 },
+ { 0x1D, "SAMR21E17A", 128, 32 },
+ { 0x1E, "SAMR21E16A", 64, 32 },
+};
+
+/* Known SAML21 parts. */
+static const struct samd_part saml21_parts[] = {
+ { 0x00, "SAML21J18A", 256, 32 },
+ { 0x01, "SAML21J17A", 128, 16 },
+ { 0x02, "SAML21J16A", 64, 8 },
+ { 0x05, "SAML21G18A", 256, 32 },
+ { 0x06, "SAML21G17A", 128, 16 },
+ { 0x07, "SAML21G16A", 64, 8 },
+ { 0x0A, "SAML21E18A", 256, 32 },
+ { 0x0B, "SAML21E17A", 128, 16 },
+ { 0x0C, "SAML21E16A", 64, 8 },
+ { 0x0D, "SAML21E15A", 32, 4 },
+};
+
+/* Known SAMC20 parts. */
+static const struct samd_part samc20_parts[] = {
+ { 0x00, "SAMC20J18A", 256, 32 },
+ { 0x01, "SAMC20J17A", 128, 16 },
+ { 0x02, "SAMC20J16A", 64, 8 },
+ { 0x03, "SAMC20J15A", 32, 4 },
+ { 0x05, "SAMC20G18A", 256, 32 },
+ { 0x06, "SAMC20G17A", 128, 16 },
+ { 0x07, "SAMC20G16A", 64, 8 },
+ { 0x08, "SAMC20G15A", 32, 4 },
+ { 0x0A, "SAMC20E18A", 256, 32 },
+ { 0x0B, "SAMC20E17A", 128, 16 },
+ { 0x0C, "SAMC20E16A", 64, 8 },
+ { 0x0D, "SAMC20E15A", 32, 4 },
+};
+
+/* Known SAMC21 parts. */
+static const struct samd_part samc21_parts[] = {
+ { 0x00, "SAMC21J18A", 256, 32 },
+ { 0x01, "SAMC21J17A", 128, 16 },
+ { 0x02, "SAMC21J16A", 64, 8 },
+ { 0x03, "SAMC21J15A", 32, 4 },
+ { 0x05, "SAMC21G18A", 256, 32 },
+ { 0x06, "SAMC21G17A", 128, 16 },
+ { 0x07, "SAMC21G16A", 64, 8 },
+ { 0x08, "SAMC21G15A", 32, 4 },
+ { 0x0A, "SAMC21E18A", 256, 32 },
+ { 0x0B, "SAMC21E17A", 128, 16 },
+ { 0x0C, "SAMC21E16A", 64, 8 },
+ { 0x0D, "SAMC21E15A", 32, 4 },
+};
+
/* Each family of parts contains a parts table in the DEVSEL field of DID. The
* processor ID, family ID, and series ID are used to determine which exact
* family this is and then we can use the corresponding table. */
samd20_parts, ARRAY_SIZE(samd20_parts) },
{ SAMD_PROCESSOR_M0, SAMD_FAMILY_D, SAMD_SERIES_21,
samd21_parts, ARRAY_SIZE(samd21_parts) },
+ { SAMD_PROCESSOR_M0, SAMD_FAMILY_D, SAMD_SERIES_21,
+ samr21_parts, ARRAY_SIZE(samr21_parts) },
+ { SAMD_PROCESSOR_M0, SAMD_FAMILY_D, SAMD_SERIES_10,
+ samd10_parts, ARRAY_SIZE(samd10_parts) },
+ { SAMD_PROCESSOR_M0, SAMD_FAMILY_D, SAMD_SERIES_11,
+ samd11_parts, ARRAY_SIZE(samd11_parts) },
+ { SAMD_PROCESSOR_M0, SAMD_FAMILY_L, SAMD_SERIES_21,
+ saml21_parts, ARRAY_SIZE(saml21_parts) },
+ { SAMD_PROCESSOR_M0, SAMD_FAMILY_C, SAMD_SERIES_20,
+ samc20_parts, ARRAY_SIZE(samc20_parts) },
+ { SAMD_PROCESSOR_M0, SAMD_FAMILY_C, SAMD_SERIES_21,
+ samc21_parts, ARRAY_SIZE(samc21_parts) },
};
struct samd_info {
static const struct samd_part *samd_find_part(uint32_t id)
{
uint8_t processor = (id >> 28);
- uint8_t family = (id >> 24) & 0x0F;
- uint8_t series = (id >> 16) & 0xFF;
+ uint8_t family = (id >> 23) & 0x1F;
+ uint8_t series = (id >> 16) & 0x3F;
uint8_t devsel = id & 0xFF;
for (unsigned i = 0; i < ARRAY_SIZE(samd_families); i++) {
return ERROR_OK;
}
+static int samd_get_flash_page_info(struct target *target,
+ uint32_t *sizep, int *nump)
+{
+ int res;
+ uint32_t param;
+
+ res = target_read_u32(target, SAMD_NVMCTRL + SAMD_NVMCTRL_PARAM, ¶m);
+ if (res == ERROR_OK) {
+ /* The PSZ field (bits 18:16) indicate the page size bytes as 2^(3+n)
+ * so 0 is 8KB and 7 is 1024KB. */
+ if (sizep)
+ *sizep = (8 << ((param >> 16) & 0x7));
+ /* The NVMP field (bits 15:0) indicates the total number of pages */
+ if (nump)
+ *nump = param & 0xFFFF;
+ } else {
+ LOG_ERROR("Couldn't read NVM Parameters register");
+ }
+
+ return res;
+}
+
static int samd_probe(struct flash_bank *bank)
{
- uint32_t id, param;
+ uint32_t id;
int res;
struct samd_info *chip = (struct samd_info *)bank->driver_priv;
const struct samd_part *part;
return ERROR_FAIL;
}
- res = target_read_u32(bank->target,
- SAMD_NVMCTRL + SAMD_NVMCTRL_PARAM, ¶m);
- if (res != ERROR_OK) {
- LOG_ERROR("Couldn't read NVM Parameters register");
- return res;
- }
-
bank->size = part->flash_kb * 1024;
chip->sector_size = bank->size / SAMD_NUM_SECTORS;
- /* The PSZ field (bits 18:16) indicate the page size bytes as 2^(3+n) so
- * 0 is 8KB and 7 is 1024KB. */
- chip->page_size = (8 << ((param >> 16) & 0x7));
- /* The NVMP field (bits 15:0) indicates the total number of pages */
- chip->num_pages = param & 0xFFFF;
+ res = samd_get_flash_page_info(bank->target, &chip->page_size,
+ &chip->num_pages);
+ if (res != ERROR_OK) {
+ LOG_ERROR("Couldn't determine Flash page size");
+ return res;
+ }
/* Sanity check: the total flash size in the DSU should match the page size
* multiplied by the number of pages. */
if (bank->size != chip->num_pages * chip->page_size) {
LOG_WARNING("SAMD: bank size doesn't match NVM parameters. "
- "Identified %uKB Flash but NVMCTRL reports %u %uB pages",
+ "Identified %" PRIu32 "KB Flash but NVMCTRL reports %u %" PRIu32 "B pages",
part->flash_kb, chip->num_pages, chip->page_size);
}
/* Done */
chip->probed = true;
- LOG_INFO("SAMD MCU: %s (%uKB Flash, %uKB RAM)", part->name,
+ LOG_INFO("SAMD MCU: %s (%" PRIu32 "KB Flash, %" PRIu32 "KB RAM)", part->name,
part->flash_kb, part->ram_kb);
return ERROR_OK;
}
-static int samd_protect(struct flash_bank *bank, int set, int first, int last)
-{
- int res;
- struct samd_info *chip = (struct samd_info *)bank->driver_priv;
-
- for (int s = first; s <= last; s++) {
- /* Load an address that is within this sector (we use offset 0) */
- res = target_write_u32(bank->target, SAMD_NVMCTRL + SAMD_NVMCTRL_ADDR,
- s * chip->sector_size);
- if (res != ERROR_OK)
- return res;
-
- /* Tell the controller to lock that sector */
- res = target_write_u16(bank->target,
- SAMD_NVMCTRL + SAMD_NVMCTRL_CTRLA,
- SAMD_NVM_CMD(SAMD_NVM_CMD_LR));
- if (res != ERROR_OK)
- return res;
- }
-
- samd_protect_check(bank);
-
- return ERROR_OK;
-}
-
-static bool samd_check_error(struct flash_bank *bank)
+static bool samd_check_error(struct target *target)
{
int ret;
bool error;
uint16_t status;
- ret = target_read_u16(bank->target,
+ ret = target_read_u16(target,
SAMD_NVMCTRL + SAMD_NVMCTRL_STATUS, &status);
if (ret != ERROR_OK) {
LOG_ERROR("Can't read NVM status");
}
/* Clear the error conditions by writing a one to them */
- ret = target_write_u16(bank->target,
+ ret = target_write_u16(target,
SAMD_NVMCTRL + SAMD_NVMCTRL_STATUS, status);
if (ret != ERROR_OK)
LOG_ERROR("Can't clear NVM error conditions");
return error;
}
-static int samd_erase_row(struct flash_bank *bank, uint32_t address)
+static int samd_issue_nvmctrl_command(struct target *target, uint16_t cmd)
+{
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ /* Read current configuration. */
+ uint16_t tmp = 0;
+ int res = target_read_u16(target, SAMD_NVMCTRL + SAMD_NVMCTRL_CTRLB,
+ &tmp);
+ if (res != ERROR_OK)
+ return res;
+
+ /* Set cache disable. */
+ res = target_write_u16(target, SAMD_NVMCTRL + SAMD_NVMCTRL_CTRLB,
+ tmp | (1<<18));
+ if (res != ERROR_OK)
+ return res;
+
+ /* Issue the NVM command */
+ int res_cmd = target_write_u16(target,
+ SAMD_NVMCTRL + SAMD_NVMCTRL_CTRLA, SAMD_NVM_CMD(cmd));
+
+ /* Try to restore configuration, regardless of NVM command write
+ * status. */
+ res = target_write_u16(target, SAMD_NVMCTRL + SAMD_NVMCTRL_CTRLB, tmp);
+
+ if (res_cmd != ERROR_OK)
+ return res_cmd;
+
+ if (res != ERROR_OK)
+ return res;
+
+ /* Check to see if the NVM command resulted in an error condition. */
+ if (samd_check_error(target))
+ return ERROR_FAIL;
+
+ return ERROR_OK;
+}
+
+static int samd_erase_row(struct target *target, uint32_t address)
{
int res;
- bool error = false;
/* Set an address contained in the row to be erased */
- res = target_write_u32(bank->target,
+ res = target_write_u32(target,
SAMD_NVMCTRL + SAMD_NVMCTRL_ADDR, address >> 1);
- if (res == ERROR_OK) {
- /* Issue the Erase Row command to erase that row */
- res = target_write_u16(bank->target,
- SAMD_NVMCTRL + SAMD_NVMCTRL_CTRLA,
- SAMD_NVM_CMD(SAMD_NVM_CMD_ER));
- /* Check (and clear) error conditions */
- error = samd_check_error(bank);
- }
+ /* Issue the Erase Row command to erase that row. */
+ if (res == ERROR_OK)
+ res = samd_issue_nvmctrl_command(target,
+ address == SAMD_USER_ROW ? SAMD_NVM_CMD_EAR : SAMD_NVM_CMD_ER);
- if (res != ERROR_OK || error) {
- LOG_ERROR("Failed to erase row containing %08X" PRIx32, address);
+ if (res != ERROR_OK) {
+ LOG_ERROR("Failed to erase row containing %08" PRIx32, address);
return ERROR_FAIL;
}
return ERROR_OK;
}
+static bool is_user_row_reserved_bit(uint8_t bit)
+{
+ /* See Table 9-3 in the SAMD20 datasheet for more information. */
+ switch (bit) {
+ /* Reserved bits */
+ case 3:
+ case 7:
+ /* Voltage regulator internal configuration with default value of 0x70,
+ * may not be changed. */
+ case 17 ... 24:
+ /* 41 is voltage regulator internal configuration and must not be
+ * changed. 42 through 47 are reserved. */
+ case 41 ... 47:
+ return true;
+ default:
+ break;
+ }
+
+ return false;
+}
+
+/* Modify the contents of the User Row in Flash. These are described in Table
+ * 9-3 of the SAMD20 datasheet. The User Row itself has a size of one page
+ * and contains a combination of "fuses" and calibration data in bits 24:17.
+ * We therefore try not to erase the row's contents unless we absolutely have
+ * to and we don't permit modifying reserved bits. */
+static int samd_modify_user_row(struct target *target, uint32_t value,
+ uint8_t startb, uint8_t endb)
+{
+ int res;
+
+ if (is_user_row_reserved_bit(startb) || is_user_row_reserved_bit(endb)) {
+ LOG_ERROR("Can't modify bits in the requested range");
+ return ERROR_FAIL;
+ }
+
+ /* Retrieve the MCU's page size, in bytes. This is also the size of the
+ * entire User Row. */
+ uint32_t page_size;
+ res = samd_get_flash_page_info(target, &page_size, NULL);
+ if (res != ERROR_OK) {
+ LOG_ERROR("Couldn't determine Flash page size");
+ return res;
+ }
+
+ /* Make sure the size is sane before we allocate. */
+ assert(page_size > 0 && page_size <= SAMD_PAGE_SIZE_MAX);
+
+ /* Make sure we're within the single page that comprises the User Row. */
+ if (startb >= (page_size * 8) || endb >= (page_size * 8)) {
+ LOG_ERROR("Can't modify bits outside the User Row page range");
+ return ERROR_FAIL;
+ }
+
+ uint8_t *buf = malloc(page_size);
+ if (!buf)
+ return ERROR_FAIL;
+
+ /* Read the user row (comprising one page) by half-words. */
+ res = target_read_memory(target, SAMD_USER_ROW, 2, page_size / 2, buf);
+ if (res != ERROR_OK)
+ goto out_user_row;
+
+ /* We will need to erase before writing if the new value needs a '1' in any
+ * position for which the current value had a '0'. Otherwise we can avoid
+ * erasing. */
+ uint32_t cur = buf_get_u32(buf, startb, endb - startb + 1);
+ if ((~cur) & value) {
+ res = samd_erase_row(target, SAMD_USER_ROW);
+ if (res != ERROR_OK) {
+ LOG_ERROR("Couldn't erase user row");
+ goto out_user_row;
+ }
+ }
+
+ /* Modify */
+ buf_set_u32(buf, startb, endb - startb + 1, value);
+
+ /* Write the page buffer back out to the target. A Flash write will be
+ * triggered automatically. */
+ res = target_write_memory(target, SAMD_USER_ROW, 4, page_size / 4, buf);
+ if (res != ERROR_OK)
+ goto out_user_row;
+
+ if (samd_check_error(target)) {
+ res = ERROR_FAIL;
+ goto out_user_row;
+ }
+
+ /* Success */
+ res = ERROR_OK;
+
+out_user_row:
+ free(buf);
+
+ return res;
+}
+
+static int samd_protect(struct flash_bank *bank, int set, int first, int last)
+{
+ struct samd_info *chip = (struct samd_info *)bank->driver_priv;
+
+ /* We can issue lock/unlock region commands with the target running but
+ * the settings won't persist unless we're able to modify the LOCK regions
+ * and that requires the target to be halted. */
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ int res = ERROR_OK;
+
+ for (int s = first; s <= last; s++) {
+ if (set != bank->sectors[s].is_protected) {
+ /* Load an address that is within this sector (we use offset 0) */
+ res = target_write_u32(bank->target,
+ SAMD_NVMCTRL + SAMD_NVMCTRL_ADDR,
+ ((s * chip->sector_size) >> 1));
+ if (res != ERROR_OK)
+ goto exit;
+
+ /* Tell the controller to lock that sector */
+ res = samd_issue_nvmctrl_command(bank->target,
+ set ? SAMD_NVM_CMD_LR : SAMD_NVM_CMD_UR);
+ if (res != ERROR_OK)
+ goto exit;
+ }
+ }
+
+ /* We've now applied our changes, however they will be undone by the next
+ * reset unless we also apply them to the LOCK bits in the User Page. The
+ * LOCK bits start at bit 48, correspoding to Sector 0 and end with bit 63,
+ * corresponding to Sector 15. A '1' means unlocked and a '0' means
+ * locked. See Table 9-3 in the SAMD20 datasheet for more details. */
+
+ res = samd_modify_user_row(bank->target, set ? 0x0000 : 0xFFFF,
+ 48 + first, 48 + last);
+ if (res != ERROR_OK)
+ LOG_WARNING("SAMD: protect settings were not made persistent!");
+
+ res = ERROR_OK;
+
+exit:
+ samd_protect_check(bank);
+
+ return res;
+}
+
static int samd_erase(struct flash_bank *bank, int first, int last)
{
int res;
return ERROR_FLASH_OPERATION_FAILED;
}
- if (!bank->sectors[s].is_erased) {
+ if (bank->sectors[s].is_erased != 1) {
/* For each row in that sector */
for (int r = s * rows_in_sector; r < (s + 1) * rows_in_sector; r++) {
- res = samd_erase_row(bank, r * chip->page_size * 4);
+ res = samd_erase_row(bank->target, r * chip->page_size * 4);
if (res != ERROR_OK) {
LOG_ERROR("SAMD: failed to erase sector %d", s);
return res;
}
/* Erase the row that we'll be writing to */
- res = samd_erase_row(bank, address);
+ res = samd_erase_row(bank->target, address);
if (res != ERROR_OK)
return res;
return res;
}
- error = samd_check_error(bank);
+ /* Access through AHB is stalled while flash is being programmed */
+ usleep(200);
+
+ error = samd_check_error(bank->target);
if (error)
return ERROR_FAIL;
return ERROR_OK;
}
+COMMAND_HANDLER(samd_handle_chip_erase_command)
+{
+ struct target *target = get_current_target(CMD_CTX);
+
+ if (target) {
+ /* Enable access to the DSU by disabling the write protect bit */
+ target_write_u32(target, SAMD_PAC1, (1<<1));
+ /* Tell the DSU to perform a full chip erase. It takes about 240ms to
+ * perform the erase. */
+ target_write_u8(target, SAMD_DSU, (1<<4));
+
+ command_print(CMD_CTX, "chip erased");
+ }
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(samd_handle_set_security_command)
+{
+ int res = ERROR_OK;
+ struct target *target = get_current_target(CMD_CTX);
+
+ if (CMD_ARGC < 1 || (CMD_ARGC >= 1 && (strcmp(CMD_ARGV[0], "enable")))) {
+ command_print(CMD_CTX, "supply the \"enable\" argument to proceed.");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ if (target) {
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ res = samd_issue_nvmctrl_command(target, SAMD_NVM_CMD_SSB);
+
+ /* Check (and clear) error conditions */
+ if (res == ERROR_OK)
+ command_print(CMD_CTX, "chip secured on next power-cycle");
+ else
+ command_print(CMD_CTX, "failed to secure chip");
+ }
+
+ return res;
+}
+
+COMMAND_HANDLER(samd_handle_eeprom_command)
+{
+ int res = ERROR_OK;
+ struct target *target = get_current_target(CMD_CTX);
+
+ if (target) {
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (CMD_ARGC >= 1) {
+ int val = atoi(CMD_ARGV[0]);
+ uint32_t code;
+
+ if (val == 0)
+ code = 7;
+ else {
+ /* Try to match size in bytes with corresponding size code */
+ for (code = 0; code <= 6; code++) {
+ if (val == (2 << (13 - code)))
+ break;
+ }
+
+ if (code > 6) {
+ command_print(CMD_CTX, "Invalid EEPROM size. Please see "
+ "datasheet for a list valid sizes.");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+ }
+
+ res = samd_modify_user_row(target, code, 4, 6);
+ } else {
+ uint16_t val;
+ res = target_read_u16(target, SAMD_USER_ROW, &val);
+ if (res == ERROR_OK) {
+ uint32_t size = ((val >> 4) & 0x7); /* grab size code */
+
+ if (size == 0x7)
+ command_print(CMD_CTX, "EEPROM is disabled");
+ else {
+ /* Otherwise, 6 is 256B, 0 is 16KB */
+ command_print(CMD_CTX, "EEPROM size is %u bytes",
+ (2 << (13 - size)));
+ }
+ }
+ }
+ }
+
+ return res;
+}
+
+COMMAND_HANDLER(samd_handle_bootloader_command)
+{
+ int res = ERROR_OK;
+ struct target *target = get_current_target(CMD_CTX);
+
+ if (target) {
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ /* Retrieve the MCU's page size, in bytes. */
+ uint32_t page_size;
+ res = samd_get_flash_page_info(target, &page_size, NULL);
+ if (res != ERROR_OK) {
+ LOG_ERROR("Couldn't determine Flash page size");
+ return res;
+ }
+
+ if (CMD_ARGC >= 1) {
+ int val = atoi(CMD_ARGV[0]);
+ uint32_t code;
+
+ if (val == 0)
+ code = 7;
+ else {
+ /* Try to match size in bytes with corresponding size code */
+ for (code = 0; code <= 6; code++) {
+ if ((unsigned int)val == (2UL << (8UL - code)) * page_size)
+ break;
+ }
+
+ if (code > 6) {
+ command_print(CMD_CTX, "Invalid bootloader size. Please "
+ "see datasheet for a list valid sizes.");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ }
+
+ res = samd_modify_user_row(target, code, 0, 2);
+ } else {
+ uint16_t val;
+ res = target_read_u16(target, SAMD_USER_ROW, &val);
+ if (res == ERROR_OK) {
+ uint32_t size = (val & 0x7); /* grab size code */
+ uint32_t nb;
+
+ if (size == 0x7)
+ nb = 0;
+ else
+ nb = (2 << (8 - size)) * page_size;
+
+ /* There are 4 pages per row */
+ command_print(CMD_CTX, "Bootloader size is %" PRIu32 " bytes (%" PRIu32 " rows)",
+ nb, (uint32_t)(nb / (page_size * 4)));
+ }
+ }
+ }
+
+ return res;
+}
+
static const struct command_registration at91samd_exec_command_handlers[] = {
{
.name = "info",
.help = "Print information about the current at91samd chip"
"and its flash configuration.",
},
+ {
+ .name = "chip-erase",
+ .handler = samd_handle_chip_erase_command,
+ .mode = COMMAND_EXEC,
+ .help = "Erase the entire Flash by using the Chip"
+ "Erase feature in the Device Service Unit (DSU).",
+ },
+ {
+ .name = "set-security",
+ .handler = samd_handle_set_security_command,
+ .mode = COMMAND_EXEC,
+ .help = "Secure the chip's Flash by setting the Security Bit."
+ "This makes it impossible to read the Flash contents."
+ "The only way to undo this is to issue the chip-erase"
+ "command.",
+ },
+ {
+ .name = "eeprom",
+ .usage = "[size_in_bytes]",
+ .handler = samd_handle_eeprom_command,
+ .mode = COMMAND_EXEC,
+ .help = "Show or set the EEPROM size setting, stored in the User Row."
+ "Please see Table 20-3 of the SAMD20 datasheet for allowed values."
+ "Changes are stored immediately but take affect after the MCU is"
+ "reset.",
+ },
+ {
+ .name = "bootloader",
+ .usage = "[size_in_bytes]",
+ .handler = samd_handle_bootloader_command,
+ .mode = COMMAND_EXEC,
+ .help = "Show or set the bootloader size, stored in the User Row."
+ "Please see Table 20-2 of the SAMD20 datasheet for allowed values."
+ "Changes are stored immediately but take affect after the MCU is"
+ "reset.",
+ },
COMMAND_REGISTRATION_DONE
};
Code Review / openocd.git / blobdiff