Set empty usage field for commands that do not need parameters

[openocd.git] / src / flash / nor / at91samd.c

diff --git a/src/flash/nor/at91samd.c b/src/flash/nor/at91samd.c
index 3c631022c72ef43953c4b7c6cee14f21fe7a44c5..c325194edeecde36f2f517e06f067038adbc29a5 100644 (file)
--- a/src/flash/nor/at91samd.c
+++ b/src/flash/nor/at91samd.c
@@ -262,6 +262,8 @@ static const struct samd_part samc20_parts[] = {
        { 0x0B, "SAMC20E17A", 128, 16 },
        { 0x0C, "SAMC20E16A", 64, 8 },
        { 0x0D, "SAMC20E15A", 32, 4 },
+       { 0x20, "SAMC20N18A", 256, 32 },
+       { 0x21, "SAMC20N17A", 128, 16 },
 };
 
 /* Known SAMC21 parts. */
@@ -278,6 +280,8 @@ static const struct samd_part samc21_parts[] = {
        { 0x0B, "SAMC21E17A", 128, 16 },
        { 0x0C, "SAMC21E16A", 64, 8 },
        { 0x0D, "SAMC21E15A", 32, 4 },
+       { 0x20, "SAMC21N18A", 256, 32 },
+       { 0x21, "SAMC21N17A", 128, 16 },
 };
 
 /* Each family of parts contains a parts table in the DEVSEL field of DID.  The
@@ -902,7 +906,8 @@ free_pb:
 FLASH_BANK_COMMAND_HANDLER(samd_flash_bank_command)
 {
        if (bank->base != SAMD_FLASH) {
-               LOG_ERROR("Address 0x%08" PRIx32 " invalid bank address (try 0x%08" PRIx32
+               LOG_ERROR("Address " TARGET_ADDR_FMT
+                               " invalid bank address (try 0x%08" PRIx32
                                "[at91samd series] )",
                                bank->base, SAMD_FLASH);
                return ERROR_FAIL;
@@ -1212,7 +1217,8 @@ static const struct command_registration at91samd_exec_command_handlers[] = {
                .name = "dsu_reset_deassert",
                .handler = samd_handle_reset_deassert,
                .mode = COMMAND_EXEC,
-               .help = "Deasert internal reset held by DSU."
+               .help = "Deassert internal reset held by DSU.",
+               .usage = "",
        },
        {
                .name = "info",
@@ -1220,6 +1226,7 @@ static const struct command_registration at91samd_exec_command_handlers[] = {
                .mode = COMMAND_EXEC,
                .help = "Print information about the current at91samd chip "
                        "and its flash configuration.",
+               .usage = "",
        },
        {
                .name = "chip-erase",
@@ -1227,6 +1234,7 @@ static const struct command_registration at91samd_exec_command_handlers[] = {
                .mode = COMMAND_EXEC,
                .help = "Erase the entire Flash by using the Chip-"
                        "Erase feature in the Device Service Unit (DSU).",
+               .usage = "",
        },
        {
                .name = "set-security",
@@ -1236,6 +1244,7 @@ static const struct command_registration at91samd_exec_command_handlers[] = {
                        "This makes it impossible to read the Flash contents. "
                        "The only way to undo this is to issue the chip-erase "
                        "command.",
+               .usage = "'enable'",
        },
        {
                .name = "eeprom",
@@ -1282,7 +1291,7 @@ static const struct command_registration at91samd_command_handlers[] = {
        COMMAND_REGISTRATION_DONE
 };
 
-struct flash_driver at91samd_flash = {
+const struct flash_driver at91samd_flash = {
        .name = "at91samd",
        .commands = at91samd_command_handlers,
        .flash_bank_command = samd_flash_bank_command,