flash/stm32l4x: add support of STM32WB1x
[openocd.git] / src / flash / nor / at91samd.c
index 0bd5f5995098c6a2aeb5b42f0fb4bbbc7204cece..d4ac4c9981565749d03d9a937dd842d486086414 100644 (file)
@@ -41,7 +41,7 @@
 #define SAMD_NVMCTRL_CTRLA             0x00    /* NVM control A register */
 #define SAMD_NVMCTRL_CTRLB             0x04    /* NVM control B register */
 #define SAMD_NVMCTRL_PARAM             0x08    /* NVM parameters register */
-#define SAMD_NVMCTRL_INTFLAG   0x18    /* NVM Interupt Flag Status & Clear */
+#define SAMD_NVMCTRL_INTFLAG   0x18    /* NVM Interrupt Flag Status & Clear */
 #define SAMD_NVMCTRL_STATUS            0x18    /* NVM status register */
 #define SAMD_NVMCTRL_ADDR              0x1C    /* NVM address register */
 #define SAMD_NVMCTRL_LOCK              0x20    /* NVM Lock section register */
@@ -52,8 +52,8 @@
 /* NVMCTRL commands.  See Table 20-4 in 42129F–SAM–10/2013 */
 #define SAMD_NVM_CMD_ER                0x02            /* Erase Row */
 #define SAMD_NVM_CMD_WP                0x04            /* Write Page */
-#define SAMD_NVM_CMD_EAR       0x05            /* Erase Auxilary Row */
-#define SAMD_NVM_CMD_WAP       0x06            /* Write Auxilary Page */
+#define SAMD_NVM_CMD_EAR       0x05            /* Erase Auxiliary Row */
+#define SAMD_NVM_CMD_WAP       0x06            /* Write Auxiliary Page */
 #define SAMD_NVM_CMD_LR                0x40            /* Lock Region */
 #define SAMD_NVM_CMD_UR                0x41            /* Unlock Region */
 #define SAMD_NVM_CMD_SPRM      0x42            /* Set Power Reduction Mode */
@@ -385,7 +385,7 @@ static const struct samd_part *samd_find_part(uint32_t id)
 {
        uint8_t devsel = SAMD_GET_DEVSEL(id);
        const struct samd_family *family = samd_find_family(id);
-       if (family == NULL)
+       if (!family)
                return NULL;
 
        for (unsigned i = 0; i < family->num_parts; i++) {
@@ -452,7 +452,7 @@ static int samd_probe(struct flash_bank *bank)
        }
 
        part = samd_find_part(id);
-       if (part == NULL) {
+       if (!part) {
                LOG_ERROR("Couldn't find part corresponding to DID %08" PRIx32, id);
                return ERROR_FAIL;
        }
@@ -606,7 +606,7 @@ static int samd_get_reservedmask(struct target *target, uint64_t *mask)
        }
        const struct samd_family *family;
        family = samd_find_family(id);
-       if (family == NULL) {
+       if (!family) {
                LOG_ERROR("Couldn't determine device family");
                return ERROR_FAIL;
        }
@@ -915,9 +915,7 @@ static int samd_write(struct flash_bank *bank, const uint8_t *buffer,
        }
 
 free_pb:
-       if (pb)
-               free(pb);
-
+       free(pb);
        return res;
 }
 
@@ -1053,31 +1051,6 @@ COMMAND_HANDLER(samd_handle_eeprom_command)
        return res;
 }
 
-static COMMAND_HELPER(get_u64_from_hexarg, unsigned int num, uint64_t *value)
-{
-       if (num >= CMD_ARGC) {
-               command_print(CMD, "Too few Arguments.");
-               return ERROR_COMMAND_SYNTAX_ERROR;
-       }
-
-       if (strlen(CMD_ARGV[num]) >= 3 &&
-               CMD_ARGV[num][0] == '0' &&
-               CMD_ARGV[num][1] == 'x') {
-               char *check = NULL;
-               *value = strtoull(&(CMD_ARGV[num][2]), &check, 16);
-               if ((value == 0 && errno == ERANGE) ||
-                       check == NULL || *check != 0) {
-                       command_print(CMD, "Invalid 64-bit hex value in argument %d.",
-                               num + 1);
-                       return ERROR_COMMAND_SYNTAX_ERROR;
-               }
-       } else {
-               command_print(CMD, "Argument %d needs to be a hex value.", num + 1);
-               return ERROR_COMMAND_SYNTAX_ERROR;
-       }
-       return ERROR_OK;
-}
-
 COMMAND_HANDLER(samd_handle_nvmuserrow_command)
 {
        int res = ERROR_OK;
@@ -1104,14 +1077,12 @@ COMMAND_HANDLER(samd_handle_nvmuserrow_command)
                        mask &= NVMUSERROW_LOCKBIT_MASK;
 
                        uint64_t value;
-                       res = CALL_COMMAND_HANDLER(get_u64_from_hexarg, 0, &value);
-                       if (res != ERROR_OK)
-                               return res;
+                       COMMAND_PARSE_NUMBER(u64, CMD_ARGV[0], value);
+
                        if (CMD_ARGC == 2) {
                                uint64_t mask_temp;
-                               res = CALL_COMMAND_HANDLER(get_u64_from_hexarg, 1, &mask_temp);
-                               if (res != ERROR_OK)
-                                       return res;
+                               COMMAND_PARSE_NUMBER(u64, CMD_ARGV[1], mask_temp);
+
                                mask &= mask_temp;
                        }
                        res = samd_modify_user_row_masked(target, value, mask);

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)