--- /dev/null
+/***************************************************************************
+ * Copyright (C) 2017 by Tomas Vanek *
+ * vanekt@fbl.cz *
+ * *
+ * Based on at91samd.c *
+ * Copyright (C) 2013 by Andrey Yurovsky *
+ * Andrey Yurovsky <yurovsky@gmail.com> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program. If not, see <http://www.gnu.org/licenses/>. *
+ ***************************************************************************/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "imp.h"
+#include "helper/binarybuffer.h"
+
+#include <target/cortex_m.h>
+
+/* A note to prefixing.
+ * Definitions and functions ingerited from at91samd.c without
+ * any change retained the original prefix samd_ so they eventualy
+ * may go to samd_common.h and .c
+ * As currently there are olny 3 short functions identical with
+ * the original source, no common file was created. */
+
+#define SAME5_PAGES_PER_BLOCK 16
+#define SAME5_NUM_PROT_BLOCKS 32
+#define SAMD_PAGE_SIZE_MAX 1024
+
+#define SAMD_FLASH 0x00000000 /* physical Flash memory */
+#define SAMD_USER_ROW 0x00804000 /* User Row of Flash */
+
+#define SAME5_PAC 0x40000000 /* Peripheral Access Control */
+
+#define SAMD_DSU 0x41002000 /* Device Service Unit */
+#define SAMD_NVMCTRL 0x41004000 /* Non-volatile memory controller */
+
+#define SAMD_DSU_STATUSA 1 /* DSU status register */
+#define SAMD_DSU_DID 0x18 /* Device ID register */
+#define SAMD_DSU_CTRL_EXT 0x100 /* CTRL register, external access */
+
+#define SAME5_NVMCTRL_CTRLA 0x00 /* NVM control A register */
+#define SAME5_NVMCTRL_CTRLB 0x04 /* NVM control B register */
+#define SAMD_NVMCTRL_PARAM 0x08 /* NVM parameters register */
+#define SAME5_NVMCTRL_INTFLAG 0x10 /* NVM interrupt flag register */
+#define SAME5_NVMCTRL_STATUS 0x12 /* NVM status register */
+#define SAME5_NVMCTRL_ADDR 0x14 /* NVM address register */
+#define SAME5_NVMCTRL_LOCK 0x18 /* NVM Lock section register */
+
+#define SAMD_CMDEX_KEY 0xA5UL
+#define SAMD_NVM_CMD(n) ((SAMD_CMDEX_KEY << 8) | (n & 0x7F))
+
+/* NVMCTRL commands. */
+#define SAME5_NVM_CMD_EP 0x00 /* Erase Page (User Page only) */
+#define SAME5_NVM_CMD_EB 0x01 /* Erase Block */
+#define SAME5_NVM_CMD_WP 0x03 /* Write Page */
+#define SAME5_NVM_CMD_WQW 0x04 /* Write Quad Word */
+#define SAME5_NVM_CMD_LR 0x11 /* Lock Region */
+#define SAME5_NVM_CMD_UR 0x12 /* Unlock Region */
+#define SAME5_NVM_CMD_PBC 0x15 /* Page Buffer Clear */
+#define SAME5_NVM_CMD_SSB 0x16 /* Set Security Bit */
+
+/* NVMCTRL bits */
+#define SAME5_NVMCTRL_CTRLA_WMODE_MASK 0x30
+
+#define SAME5_NVMCTRL_INTFLAG_DONE (1 << 0)
+#define SAME5_NVMCTRL_INTFLAG_ADDRE (1 << 1)
+#define SAME5_NVMCTRL_INTFLAG_PROGE (1 << 2)
+#define SAME5_NVMCTRL_INTFLAG_LOCKE (1 << 3)
+#define SAME5_NVMCTRL_INTFLAG_ECCSE (1 << 4)
+#define SAME5_NVMCTRL_INTFLAG_ECCDE (1 << 5)
+#define SAME5_NVMCTRL_INTFLAG_NVME (1 << 6)
+
+
+/* Known identifiers */
+#define SAMD_PROCESSOR_M0 0x01
+#define SAMD_PROCESSOR_M4 0x06
+#define SAMD_FAMILY_D 0x00
+#define SAMD_FAMILY_E 0x03
+#define SAMD_SERIES_51 0x06
+#define SAME_SERIES_51 0x01
+#define SAME_SERIES_53 0x03
+#define SAME_SERIES_54 0x04
+
+/* Device ID macros */
+#define SAMD_GET_PROCESSOR(id) (id >> 28)
+#define SAMD_GET_FAMILY(id) (((id >> 23) & 0x1F))
+#define SAMD_GET_SERIES(id) (((id >> 16) & 0x3F))
+#define SAMD_GET_DEVSEL(id) (id & 0xFF)
+
+/* Bits to mask user row */
+#define NVMUSERROW_SAM_E5_D5_MASK ((uint64_t)0x7FFF00FF3C007FFF)
+
+struct samd_part {
+ uint8_t id;
+ const char *name;
+ uint32_t flash_kb;
+ uint32_t ram_kb;
+};
+
+/* See SAM D5x/E5x Family Silicon Errata and Data Sheet Clarification
+ * DS80000748B */
+/* Known SAMD51 parts. */
+static const struct samd_part samd51_parts[] = {
+ { 0x00, "SAMD51P20A", 1024, 256 },
+ { 0x01, "SAMD51P19A", 512, 192 },
+ { 0x02, "SAMD51N20A", 1024, 256 },
+ { 0x03, "SAMD51N19A", 512, 192 },
+ { 0x04, "SAMD51J20A", 1024, 256 },
+ { 0x05, "SAMD51J19A", 512, 192 },
+ { 0x06, "SAMD51J18A", 256, 128 },
+ { 0x07, "SAMD51G19A", 512, 192 },
+ { 0x08, "SAMD51G18A", 256, 128 },
+};
+
+/* Known SAME51 parts. */
+static const struct samd_part same51_parts[] = {
+ { 0x00, "SAME51N20A", 1024, 256 },
+ { 0x01, "SAME51N19A", 512, 192 },
+ { 0x02, "SAME51J19A", 512, 192 },
+ { 0x03, "SAME51J18A", 256, 128 },
+ { 0x04, "SAME51J20A", 1024, 256 },
+};
+
+/* Known SAME53 parts. */
+static const struct samd_part same53_parts[] = {
+ { 0x02, "SAME53N20A", 1024, 256 },
+ { 0x03, "SAME53N19A", 512, 192 },
+ { 0x04, "SAME53J20A", 1024, 256 },
+ { 0x05, "SAME53J19A", 512, 192 },
+ { 0x06, "SAME53J18A", 256, 128 },
+};
+
+/* Known SAME54 parts. */
+static const struct samd_part same54_parts[] = {
+ { 0x00, "SAME54P20A", 1024, 256 },
+ { 0x01, "SAME54P19A", 512, 192 },
+ { 0x02, "SAME54N20A", 1024, 256 },
+ { 0x03, "SAME54N19A", 512, 192 },
+};
+
+/* Each family of parts contains a parts table in the DEVSEL field of DID. The
+ * processor ID, family ID, and series ID are used to determine which exact
+ * family this is and then we can use the corresponding table. */
+struct samd_family {
+ uint8_t processor;
+ uint8_t family;
+ uint8_t series;
+ const struct samd_part *parts;
+ size_t num_parts;
+};
+
+/* Known SAMD families */
+static const struct samd_family samd_families[] = {
+ { SAMD_PROCESSOR_M4, SAMD_FAMILY_D, SAMD_SERIES_51,
+ samd51_parts, ARRAY_SIZE(samd51_parts) },
+ { SAMD_PROCESSOR_M4, SAMD_FAMILY_E, SAME_SERIES_51,
+ same51_parts, ARRAY_SIZE(same51_parts) },
+ { SAMD_PROCESSOR_M4, SAMD_FAMILY_E, SAME_SERIES_53,
+ same53_parts, ARRAY_SIZE(same53_parts) },
+ { SAMD_PROCESSOR_M4, SAMD_FAMILY_E, SAME_SERIES_54,
+ same54_parts, ARRAY_SIZE(same54_parts) },
+};
+
+struct samd_info {
+ const struct samd_params *par;
+ uint32_t page_size;
+ int num_pages;
+ int sector_size;
+ int prot_block_size;
+
+ bool probed;
+ struct target *target;
+};
+
+
+/**
+ * Gives the family structure to specific device id.
+ * @param id The id of the device.
+ * @return On failure NULL, otherwise a pointer to the structure.
+ */
+static const struct samd_family *samd_find_family(uint32_t id)
+{
+ uint8_t processor = SAMD_GET_PROCESSOR(id);
+ uint8_t family = SAMD_GET_FAMILY(id);
+ uint8_t series = SAMD_GET_SERIES(id);
+
+ for (unsigned i = 0; i < ARRAY_SIZE(samd_families); i++) {
+ if (samd_families[i].processor == processor &&
+ samd_families[i].series == series &&
+ samd_families[i].family == family)
+ return &samd_families[i];
+ }
+
+ return NULL;
+}
+
+/**
+ * Gives the part structure to specific device id.
+ * @param id The id of the device.
+ * @return On failure NULL, otherwise a pointer to the structure.
+ */
+static const struct samd_part *samd_find_part(uint32_t id)
+{
+ uint8_t devsel = SAMD_GET_DEVSEL(id);
+ const struct samd_family *family = samd_find_family(id);
+ if (family == NULL)
+ return NULL;
+
+ for (unsigned i = 0; i < family->num_parts; i++) {
+ if (family->parts[i].id == devsel)
+ return &family->parts[i];
+ }
+
+ return NULL;
+}
+
+static int same5_protect_check(struct flash_bank *bank)
+{
+ int res, prot_block;
+ uint32_t lock;
+
+ res = target_read_u32(bank->target,
+ SAMD_NVMCTRL + SAME5_NVMCTRL_LOCK, &lock);
+ if (res != ERROR_OK)
+ return res;
+
+ /* Lock bits are active-low */
+ for (prot_block = 0; prot_block < bank->num_prot_blocks; prot_block++)
+ bank->prot_blocks[prot_block].is_protected = !(lock & (1u<<prot_block));
+
+ return ERROR_OK;
+}
+
+static int samd_get_flash_page_info(struct target *target,
+ uint32_t *sizep, int *nump)
+{
+ int res;
+ uint32_t param;
+
+ res = target_read_u32(target, SAMD_NVMCTRL + SAMD_NVMCTRL_PARAM, ¶m);
+ if (res == ERROR_OK) {
+ /* The PSZ field (bits 18:16) indicate the page size bytes as 2^(3+n)
+ * so 0 is 8KB and 7 is 1024KB. */
+ if (sizep)
+ *sizep = (8 << ((param >> 16) & 0x7));
+ /* The NVMP field (bits 15:0) indicates the total number of pages */
+ if (nump)
+ *nump = param & 0xFFFF;
+ } else {
+ LOG_ERROR("Couldn't read NVM Parameters register");
+ }
+
+ return res;
+}
+
+static int same5_probe(struct flash_bank *bank)
+{
+ uint32_t id;
+ int res;
+ struct samd_info *chip = (struct samd_info *)bank->driver_priv;
+ const struct samd_part *part;
+
+ if (chip->probed)
+ return ERROR_OK;
+
+ res = target_read_u32(bank->target, SAMD_DSU + SAMD_DSU_DID, &id);
+ if (res != ERROR_OK) {
+ LOG_ERROR("Couldn't read Device ID register");
+ return res;
+ }
+
+ part = samd_find_part(id);
+ if (part == NULL) {
+ LOG_ERROR("Couldn't find part corresponding to DID %08" PRIx32, id);
+ return ERROR_FAIL;
+ }
+
+ bank->size = part->flash_kb * 1024;
+
+ res = samd_get_flash_page_info(bank->target, &chip->page_size,
+ &chip->num_pages);
+ if (res != ERROR_OK) {
+ LOG_ERROR("Couldn't determine Flash page size");
+ return res;
+ }
+
+ /* Sanity check: the total flash size in the DSU should match the page size
+ * multiplied by the number of pages. */
+ if (bank->size != chip->num_pages * chip->page_size) {
+ LOG_WARNING("SAM: bank size doesn't match NVM parameters. "
+ "Identified %" PRIu32 "KB Flash but NVMCTRL reports %u %" PRIu32 "B pages",
+ part->flash_kb, chip->num_pages, chip->page_size);
+ }
+
+ /* Erase granularity = 1 block = 16 pages */
+ chip->sector_size = chip->page_size * SAME5_PAGES_PER_BLOCK;
+
+ /* Allocate the sector table */
+ bank->num_sectors = chip->num_pages / SAME5_PAGES_PER_BLOCK;
+ bank->sectors = alloc_block_array(0, chip->sector_size, bank->num_sectors);
+ if (!bank->sectors)
+ return ERROR_FAIL;
+
+ /* 16 protection blocks per device */
+ chip->prot_block_size = bank->size / SAME5_NUM_PROT_BLOCKS;
+
+ /* Allocate the table of protection blocks */
+ bank->num_prot_blocks = SAME5_NUM_PROT_BLOCKS;
+ bank->prot_blocks = alloc_block_array(0, chip->prot_block_size, bank->num_prot_blocks);
+ if (!bank->prot_blocks)
+ return ERROR_FAIL;
+
+ same5_protect_check(bank);
+
+ /* Done */
+ chip->probed = true;
+
+ LOG_INFO("SAM MCU: %s (%" PRIu32 "KB Flash, %" PRIu32 "KB RAM)", part->name,
+ part->flash_kb, part->ram_kb);
+
+ return ERROR_OK;
+}
+
+static int same5_wait_and_check_error(struct target *target)
+{
+ int ret, ret2;
+ int rep_cnt = 100;
+ uint16_t intflag;
+
+ do {
+ ret = target_read_u16(target,
+ SAMD_NVMCTRL + SAME5_NVMCTRL_INTFLAG, &intflag);
+ if (ret == ERROR_OK && intflag & SAME5_NVMCTRL_INTFLAG_DONE)
+ break;
+ } while (--rep_cnt);
+
+ if (ret != ERROR_OK) {
+ LOG_ERROR("Can't read NVM INTFLAG");
+ return ret;
+ }
+#if 0
+ if (intflag & SAME5_NVMCTRL_INTFLAG_ECCSE)
+ LOG_ERROR("SAM: ECC Single Error");
+
+ if (intflag & SAME5_NVMCTRL_INTFLAG_ECCDE) {
+ LOG_ERROR("SAM: ECC Double Error");
+ ret = ERROR_FLASH_OPERATION_FAILED;
+ }
+#endif
+ if (intflag & SAME5_NVMCTRL_INTFLAG_ADDRE) {
+ LOG_ERROR("SAM: Addr Error");
+ ret = ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if (intflag & SAME5_NVMCTRL_INTFLAG_NVME) {
+ LOG_ERROR("SAM: NVM Error");
+ ret = ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if (intflag & SAME5_NVMCTRL_INTFLAG_LOCKE) {
+ LOG_ERROR("SAM: NVM lock error");
+ ret = ERROR_FLASH_PROTECTED;
+ }
+
+ if (intflag & SAME5_NVMCTRL_INTFLAG_PROGE) {
+ LOG_ERROR("SAM: NVM programming error");
+ ret = ERROR_FLASH_OPER_UNSUPPORTED;
+ }
+
+ /* Clear the error conditions by writing a one to them */
+ ret2 = target_write_u16(target,
+ SAMD_NVMCTRL + SAME5_NVMCTRL_INTFLAG, intflag);
+ if (ret2 != ERROR_OK)
+ LOG_ERROR("Can't clear NVM error conditions");
+
+ return ret;
+}
+
+static int same5_issue_nvmctrl_command(struct target *target, uint16_t cmd)
+{
+ int res;
+
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ /* Issue the NVM command */
+ /* 32-bit write is used to ensure atomic operation on ST-Link */
+ res = target_write_u32(target,
+ SAMD_NVMCTRL + SAME5_NVMCTRL_CTRLB, SAMD_NVM_CMD(cmd));
+ if (res != ERROR_OK)
+ return res;
+
+ /* Check to see if the NVM command resulted in an error condition. */
+ return same5_wait_and_check_error(target);
+}
+
+/**
+ * Erases a flash block or page at the given address.
+ * @param target Pointer to the target structure.
+ * @param address The address of the row.
+ * @return On success ERROR_OK, on failure an errorcode.
+ */
+static int same5_erase_block(struct target *target, uint32_t address)
+{
+ int res;
+
+ /* Set an address contained in the block to be erased */
+ res = target_write_u32(target,
+ SAMD_NVMCTRL + SAME5_NVMCTRL_ADDR, address);
+
+ /* Issue the Erase Block command. */
+ if (res == ERROR_OK)
+ res = same5_issue_nvmctrl_command(target,
+ address == SAMD_USER_ROW ? SAME5_NVM_CMD_EP : SAME5_NVM_CMD_EB);
+
+ if (res != ERROR_OK) {
+ LOG_ERROR("Failed to erase block containing %08" PRIx32, address);
+ return ERROR_FAIL;
+ }
+
+ return ERROR_OK;
+}
+
+
+static int same5_pre_write_check(struct target *target)
+{
+ int res;
+ uint32_t nvm_ctrla;
+
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ /* Check if manual write mode is set */
+ res = target_read_u32(target, SAMD_NVMCTRL + SAME5_NVMCTRL_CTRLA, &nvm_ctrla);
+ if (res != ERROR_OK)
+ return res;
+
+ if (nvm_ctrla & SAME5_NVMCTRL_CTRLA_WMODE_MASK) {
+ LOG_ERROR("The flash controller must be in manual write mode. Issue 'reset init' and retry.");
+ return ERROR_FAIL;
+ }
+
+ return res;
+}
+
+
+/**
+ * Modify the contents of the User Row in Flash. The User Row itself
+ * has a size of one page and contains a combination of "fuses" and
+ * calibration data. Bits which have a value of zero in the mask will
+ * not be changed.
+ * @param target Pointer to the target structure.
+ * @param data Pointer to the value to write.
+ * @param mask Pointer to bitmask, 0 -> value stays untouched.
+ * @param offset Offset in user row where new data will be applied.
+ * @param count Size of buffer and mask in bytes.
+ * @return On success ERROR_OK, on failure an errorcode.
+ */
+static int same5_modify_user_row_masked(struct target *target,
+ const uint8_t *data, const uint8_t *mask,
+ uint32_t offset, uint32_t count)
+{
+ int res;
+
+ /* Retrieve the MCU's flash page size, in bytes. */
+ uint32_t page_size;
+ res = samd_get_flash_page_info(target, &page_size, NULL);
+ if (res != ERROR_OK) {
+ LOG_ERROR("Couldn't determine Flash page size");
+ return res;
+ }
+
+ /* Make sure the size is sane. */
+ assert(page_size <= SAMD_PAGE_SIZE_MAX &&
+ page_size >= offset + count);
+
+ uint8_t buf[SAMD_PAGE_SIZE_MAX];
+ /* Read the user row (comprising one page) by words. */
+ res = target_read_memory(target, SAMD_USER_ROW, 4, page_size / 4, buf);
+ if (res != ERROR_OK)
+ return res;
+
+ /* Modify buffer and check if really changed */
+ bool changed = false;
+ uint32_t i;
+ for (i = 0; i < count; i++) {
+ uint8_t old_b = buf[offset+i];
+ uint8_t new_b = (old_b & ~mask[i]) | (data[i] & mask[i]);
+ buf[offset+i] = new_b;
+ if (old_b != new_b)
+ changed = true;
+ }
+
+ if (!changed)
+ return ERROR_OK;
+
+ res = same5_pre_write_check(target);
+ if (res != ERROR_OK)
+ return res;
+
+ res = same5_erase_block(target, SAMD_USER_ROW);
+ if (res != ERROR_OK) {
+ LOG_ERROR("Couldn't erase user row");
+ return res;
+ }
+
+ /* Write the page buffer back out to the target using Write Quad Word */
+ for (i = 0; i < page_size; i += 4 * 4) {
+ res = target_write_memory(target, SAMD_USER_ROW + i, 4, 4, buf + i);
+ if (res != ERROR_OK)
+ return res;
+
+ /* Trigger flash write */
+ res = same5_issue_nvmctrl_command(target, SAME5_NVM_CMD_WQW);
+ if (res != ERROR_OK)
+ return res;
+ }
+
+ return res;
+}
+
+/**
+ * Modifies the user row register to the given value.
+ * @param target Pointer to the target structure.
+ * @param value The value to write.
+ * @param startb The bit-offset by which the given value is shifted.
+ * @param endb The bit-offset of the last bit in value to write.
+ * @return On success ERROR_OK, on failure an errorcode.
+ */
+static int same5_modify_user_row(struct target *target, uint32_t value,
+ uint8_t startb, uint8_t endb)
+{
+ uint8_t buf_val[8] = { 0 };
+ uint8_t buf_mask[8] = { 0 };
+
+ assert(startb <= endb && endb < 64);
+ buf_set_u32(buf_val, startb, endb + 1 - startb, value);
+ buf_set_u32(buf_mask, startb, endb + 1 - startb, 0xffffffff);
+
+ return same5_modify_user_row_masked(target,
+ buf_val, buf_mask, 0, 8);
+}
+
+static int same5_protect(struct flash_bank *bank, int set, int first_prot_bl, int last_prot_bl)
+{
+ int res = ERROR_OK;
+ int prot_block;
+
+ /* We can issue lock/unlock region commands with the target running but
+ * the settings won't persist unless we're able to modify the LOCK regions
+ * and that requires the target to be halted. */
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ for (prot_block = first_prot_bl; prot_block <= last_prot_bl; prot_block++) {
+ if (set != bank->prot_blocks[prot_block].is_protected) {
+ /* Load an address that is within this protection block (we use offset 0) */
+ res = target_write_u32(bank->target,
+ SAMD_NVMCTRL + SAME5_NVMCTRL_ADDR,
+ bank->prot_blocks[prot_block].offset);
+ if (res != ERROR_OK)
+ goto exit;
+
+ /* Tell the controller to lock that block */
+ res = same5_issue_nvmctrl_command(bank->target,
+ set ? SAME5_NVM_CMD_LR : SAME5_NVM_CMD_UR);
+ if (res != ERROR_OK)
+ goto exit;
+ }
+ }
+
+ /* We've now applied our changes, however they will be undone by the next
+ * reset unless we also apply them to the LOCK bits in the User Page.
+ * A '1' means unlocked and a '0' means locked. */
+ const uint8_t lock[4] = { 0, 0, 0, 0 };
+ const uint8_t unlock[4] = { 0xff, 0xff, 0xff, 0xff };
+ uint8_t mask[4] = { 0, 0, 0, 0 };
+
+ buf_set_u32(mask, first_prot_bl, last_prot_bl + 1 - first_prot_bl, 0xffffffff);
+
+ res = same5_modify_user_row_masked(bank->target,
+ set ? lock : unlock, mask, 8, 4);
+ if (res != ERROR_OK)
+ LOG_WARNING("SAM: protect settings were not made persistent!");
+
+ res = ERROR_OK;
+
+exit:
+ same5_protect_check(bank);
+
+ return res;
+}
+
+static int same5_erase(struct flash_bank *bank, int first_sect, int last_sect)
+{
+ int res, s;
+ struct samd_info *chip = (struct samd_info *)bank->driver_priv;
+
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (!chip->probed)
+ return ERROR_FLASH_BANK_NOT_PROBED;
+
+ /* For each sector to be erased */
+ for (s = first_sect; s <= last_sect; s++) {
+ res = same5_erase_block(bank->target, bank->sectors[s].offset);
+ if (res != ERROR_OK) {
+ LOG_ERROR("SAM: failed to erase sector %d at 0x%08" PRIx32, s, bank->sectors[s].offset);
+ return res;
+ }
+ }
+
+ return ERROR_OK;
+}
+
+
+static int same5_write(struct flash_bank *bank, const uint8_t *buffer,
+ uint32_t offset, uint32_t count)
+{
+ int res;
+ uint32_t address;
+ uint32_t pg_offset;
+ uint32_t nb;
+ uint32_t nw;
+ struct samd_info *chip = (struct samd_info *)bank->driver_priv;
+ uint8_t *pb = NULL;
+
+ res = same5_pre_write_check(bank->target);
+ if (res != ERROR_OK)
+ return res;
+
+ if (!chip->probed)
+ return ERROR_FLASH_BANK_NOT_PROBED;
+
+ res = same5_issue_nvmctrl_command(bank->target, SAME5_NVM_CMD_PBC);
+ if (res != ERROR_OK) {
+ LOG_ERROR("%s: %d", __func__, __LINE__);
+ return res;
+ }
+
+ while (count) {
+ nb = chip->page_size - offset % chip->page_size;
+ if (count < nb)
+ nb = count;
+
+ address = bank->base + offset;
+ pg_offset = offset % chip->page_size;
+
+ if (offset % 4 || (offset + nb) % 4) {
+ /* Either start or end of write is not word aligned */
+ if (!pb) {
+ pb = malloc(chip->page_size);
+ if (!pb)
+ return ERROR_FAIL;
+ }
+
+ /* Set temporary page buffer to 0xff and overwrite the relevant part */
+ memset(pb, 0xff, chip->page_size);
+ memcpy(pb + pg_offset, buffer, nb);
+
+ /* Align start address to a word boundary */
+ address -= offset % 4;
+ pg_offset -= offset % 4;
+ assert(pg_offset % 4 == 0);
+
+ /* Extend length to whole words */
+ nw = (nb + offset % 4 + 3) / 4;
+ assert(pg_offset + 4 * nw <= chip->page_size);
+
+ /* Now we have original data extended by 0xff bytes
+ * to the nearest word boundary on both start and end */
+ res = target_write_memory(bank->target, address, 4, nw, pb + pg_offset);
+ } else {
+ assert(nb % 4 == 0);
+ nw = nb / 4;
+ assert(pg_offset + 4 * nw <= chip->page_size);
+
+ /* Word aligned data, use direct write from buffer */
+ res = target_write_memory(bank->target, address, 4, nw, buffer);
+ }
+ if (res != ERROR_OK) {
+ LOG_ERROR("%s: %d", __func__, __LINE__);
+ goto free_pb;
+ }
+
+ res = same5_issue_nvmctrl_command(bank->target, SAME5_NVM_CMD_WP);
+ if (res != ERROR_OK) {
+ LOG_ERROR("%s: write failed at address 0x%08" PRIx32, __func__, address);
+ goto free_pb;
+ }
+
+ /* We're done with the page contents */
+ count -= nb;
+ offset += nb;
+ buffer += nb;
+ }
+
+free_pb:
+ if (pb)
+ free(pb);
+
+ return res;
+}
+
+
+FLASH_BANK_COMMAND_HANDLER(same5_flash_bank_command)
+{
+ if (bank->base != SAMD_FLASH) {
+ LOG_ERROR("Address 0x%08" PRIx32 " invalid bank address (try 0x%08" PRIx32
+ "[same5] )",
+ bank->base, SAMD_FLASH);
+ return ERROR_FAIL;
+ }
+
+ struct samd_info *chip;
+ chip = calloc(1, sizeof(*chip));
+ if (!chip) {
+ LOG_ERROR("No memory for flash bank chip info");
+ return ERROR_FAIL;
+ }
+
+ chip->target = bank->target;
+ chip->probed = false;
+
+ bank->driver_priv = chip;
+
+ return ERROR_OK;
+}
+
+
+COMMAND_HANDLER(same5_handle_chip_erase_command)
+{
+ struct target *target = get_current_target(CMD_CTX);
+ if (!target)
+ return ERROR_FAIL;
+
+ /* Enable access to the DSU by disabling the write protect bit */
+ target_write_u32(target, SAME5_PAC, (1<<16) | (1<<5) | (1<<1));
+ /* intentionally without error checking - not accessible on secured chip */
+
+ /* Tell the DSU to perform a full chip erase. It takes about 240ms to
+ * perform the erase. */
+ int res = target_write_u8(target, SAMD_DSU + SAMD_DSU_CTRL_EXT, (1<<4));
+ if (res == ERROR_OK)
+ command_print(CMD_CTX, "chip erase started");
+ else
+ command_print(CMD_CTX, "write to DSU CTRL failed");
+
+ return res;
+}
+
+
+COMMAND_HANDLER(same5_handle_userpage_command)
+{
+ int res = ERROR_OK;
+ struct target *target = get_current_target(CMD_CTX);
+ if (!target)
+ return ERROR_FAIL;
+
+ if (CMD_ARGC > 2) {
+ command_print(CMD_CTX, "Too much Arguments given.");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ if (CMD_ARGC >= 1) {
+ uint64_t mask = NVMUSERROW_SAM_E5_D5_MASK;
+ uint64_t value = strtoull(CMD_ARGV[0], NULL, 0);
+
+ if (CMD_ARGC == 2) {
+ uint64_t mask_temp = strtoull(CMD_ARGV[1], NULL, 0);
+ mask &= mask_temp;
+ }
+
+ uint8_t val_buf[8], mask_buf[8];
+ target_buffer_set_u64(target, val_buf, value);
+ target_buffer_set_u64(target, mask_buf, mask);
+
+ res = same5_modify_user_row_masked(target,
+ val_buf, mask_buf, 0, sizeof(val_buf));
+ }
+
+ uint8_t buffer[8];
+ int res2 = target_read_memory(target, SAMD_USER_ROW, 4, 2, buffer);
+ if (res2 == ERROR_OK) {
+ uint64_t value = target_buffer_get_u64(target, buffer);
+ command_print(CMD_CTX, "USER PAGE: 0x%016"PRIX64, value);
+ } else {
+ LOG_ERROR("USER PAGE could not be read.");
+ }
+
+ if (CMD_ARGC >= 1)
+ return res;
+ else
+ return res2;
+}
+
+
+COMMAND_HANDLER(same5_handle_bootloader_command)
+{
+ int res = ERROR_OK;
+ struct target *target = get_current_target(CMD_CTX);
+ if (!target)
+ return ERROR_FAIL;
+
+ if (CMD_ARGC >= 1) {
+ unsigned long size = strtoul(CMD_ARGV[0], NULL, 0);
+ uint32_t code = (size + 8191) / 8192;
+ if (code > 15) {
+ command_print(CMD_CTX, "Invalid bootloader size. Please "
+ "see datasheet for a list valid sizes.");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ res = same5_modify_user_row(target, 15 - code, 26, 29);
+ }
+
+ uint32_t val;
+ int res2 = target_read_u32(target, SAMD_USER_ROW, &val);
+ if (res2 == ERROR_OK) {
+ uint32_t code = (val >> 26) & 0xf; /* grab size code */
+ uint32_t size = (15 - code) * 8192;
+ command_print(CMD_CTX, "Bootloader protected in the first %"
+ PRIu32 " bytes", size);
+ }
+
+ if (CMD_ARGC >= 1)
+ return res;
+ else
+ return res2;
+}
+
+
+COMMAND_HANDLER(samd_handle_reset_deassert)
+{
+ struct target *target = get_current_target(CMD_CTX);
+ int res = ERROR_OK;
+ enum reset_types jtag_reset_config = jtag_get_reset_config();
+ if (!target)
+ return ERROR_FAIL;
+
+ /* If the target has been unresponsive before, try to re-establish
+ * communication now - CPU is held in reset by DSU, DAP is working */
+ if (!target_was_examined(target))
+ target_examine_one(target);
+ target_poll(target);
+
+ /* In case of sysresetreq, debug retains state set in cortex_m_assert_reset()
+ * so we just release reset held by DSU
+ *
+ * n_RESET (srst) clears the DP, so reenable debug and set vector catch here
+ *
+ * After vectreset DSU release is not needed however makes no harm
+ */
+ if (target->reset_halt && (jtag_reset_config & RESET_HAS_SRST)) {
+ res = target_write_u32(target, DCB_DHCSR, DBGKEY | C_HALT | C_DEBUGEN);
+ if (res == ERROR_OK)
+ res = target_write_u32(target, DCB_DEMCR,
+ TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET);
+ /* do not return on error here, releasing DSU reset is more important */
+ }
+
+ /* clear CPU Reset Phase Extension bit */
+ int res2 = target_write_u8(target, SAMD_DSU + SAMD_DSU_STATUSA, (1<<1));
+ if (res2 != ERROR_OK)
+ return res2;
+
+ return res;
+}
+
+static const struct command_registration same5_exec_command_handlers[] = {
+ {
+ .name = "dsu_reset_deassert",
+ .handler = samd_handle_reset_deassert,
+ .mode = COMMAND_EXEC,
+ .help = "Deasert internal reset held by DSU."
+ },
+ {
+ .name = "chip-erase",
+ .handler = same5_handle_chip_erase_command,
+ .mode = COMMAND_EXEC,
+ .help = "Erase the entire Flash by using the Chip-"
+ "Erase feature in the Device Service Unit (DSU).",
+ },
+ {
+ .name = "bootloader",
+ .usage = "[size_in_bytes]",
+ .handler = same5_handle_bootloader_command,
+ .mode = COMMAND_EXEC,
+ .help = "Show or set the bootloader protection size, stored in the User Row. "
+ "Changes are stored immediately but take affect after the MCU is "
+ "reset.",
+ },
+ {
+ .name = "userpage",
+ .usage = "[value] [mask]",
+ .handler = same5_handle_userpage_command,
+ .mode = COMMAND_EXEC,
+ .help = "Show or set the first 64-bit part of user page "
+ "located at address 0x804000. Use the optional mask argument "
+ "to prevent changes at positions where the bitvalue is zero. "
+ "For security reasons the reserved-bits are masked out "
+ "in background and therefore cannot be changed.",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+static const struct command_registration same5_command_handlers[] = {
+ {
+ .name = "atsame5",
+ .mode = COMMAND_ANY,
+ .help = "atsame5 flash command group",
+ .usage = "",
+ .chain = same5_exec_command_handlers,
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+struct flash_driver atsame5_flash = {
+ .name = "atsame5",
+ .commands = same5_command_handlers,
+ .flash_bank_command = same5_flash_bank_command,
+ .erase = same5_erase,
+ .protect = same5_protect,
+ .write = same5_write,
+ .read = default_flash_read,
+ .probe = same5_probe,
+ .auto_probe = same5_probe,
+ .erase_check = default_flash_blank_check,
+ .protect_check = same5_protect_check,
+ .free_driver_priv = default_flash_free_driver_priv,
+};
Code Review / openocd.git / blobdiff