jtagspi: fix build on MacOS
[openocd.git] / src / flash / nor / dsp5680xx_flash.c
index 6f1eccfeb9bd31e3c9bbd94242cec51985edcd8f..5e8eec30fb0d313d231cfec41348a84e6d8a4b50 100644 (file)
@@ -130,15 +130,9 @@ static int dsp5680xx_flash_protect(struct flash_bank *bank, int set,
 
        if (set)
                retval = dsp5680xx_f_lock(bank->target);
-       else {
+       else
                retval = dsp5680xx_f_unlock(bank->target);
-               if (retval == ERROR_OK) {
-                       /* mark all as erased */
-                       for (int i = 0; i <= (HFM_SECTOR_COUNT - 1); i++)
-                               /* FM does not recognize it as erased if erased via JTAG. */
-                               bank->sectors[i].is_erased = 1;
-               }
-       }
+
        return retval;
 }
 
@@ -156,8 +150,6 @@ static int dsp5680xx_flash_protect(struct flash_bank *bank, int set,
 static int dsp5680xx_flash_write(struct flash_bank *bank, const uint8_t *buffer,
                                 uint32_t offset, uint32_t count)
 {
-       int retval;
-
        if ((offset + count / 2) > bank->size) {
                LOG_ERROR("%s: Flash bank cannot fit data.", __func__);
                return ERROR_FAIL;
@@ -171,17 +163,7 @@ static int dsp5680xx_flash_write(struct flash_bank *bank, const uint8_t *buffer,
                LOG_ERROR("%s: Writing to odd addresses not supported for this target", __func__);
                return ERROR_FAIL;
        }
-       retval = dsp5680xx_f_wr(bank->target, buffer, bank->base + offset / 2, count, 0);
-       uint32_t addr_word;
-
-       for (addr_word = bank->base + offset / 2; addr_word < count / 2;
-                       addr_word += (HFM_SECTOR_SIZE / 2)) {
-               if (retval == ERROR_OK)
-                       bank->sectors[addr_word / (HFM_SECTOR_SIZE / 2)].is_erased = 0;
-               else
-                       bank->sectors[addr_word / (HFM_SECTOR_SIZE / 2)].is_erased = -1;
-       }
-       return retval;
+       return dsp5680xx_f_wr(bank->target, buffer, bank->base + offset / 2, count, 0);
 }
 
 static int dsp5680xx_probe(struct flash_bank *bank)
@@ -193,8 +175,8 @@ static int dsp5680xx_probe(struct flash_bank *bank)
 /**
  * The flash module (FM) on the dsp5680xx supports both individual sector
  * and mass erase of the flash memory.
- * If this function is called with @first == @last == 0 or if @first is the
- * first sector (#0) and @last is the last sector then the mass erase command
+ * If this function is called with @a first == @a last == 0 or if @a first is the
+ * first sector (#0) and @last is the last sector then the mass erase command
  * is executed (much faster than erasing each sector individually).
  *
  * @param bank
@@ -206,22 +188,7 @@ static int dsp5680xx_probe(struct flash_bank *bank)
 static int dsp5680xx_flash_erase(struct flash_bank *bank, unsigned int first,
                unsigned int last)
 {
-       int retval;
-
-       retval = dsp5680xx_f_erase(bank->target, (uint32_t) first, (uint32_t) last);
-       if ((!(first | last)) || ((first == 0) && (last == (HFM_SECTOR_COUNT - 1))))
-               last = HFM_SECTOR_COUNT - 1;
-       if (retval == ERROR_OK)
-               for (unsigned int i = first; i <= last; i++)
-                       bank->sectors[i].is_erased = 1;
-       else
-               /**
-                * If an error occurred unknown status
-                *is set even though some sector could have been correctly erased.
-                */
-               for (unsigned int i = first; i <= last; i++)
-                       bank->sectors[i].is_erased = -1;
-       return retval;
+       return dsp5680xx_f_erase(bank->target, (uint32_t) first, (uint32_t) last);
 }
 
 /**
@@ -241,16 +208,14 @@ static int dsp5680xx_flash_erase_check(struct flash_bank *bank)
        uint32_t i;
 
        for (i = 0; i < HFM_SECTOR_COUNT; i++) {
-               if (bank->sectors[i].is_erased == -1) {
-                       retval = dsp5680xx_f_erase_check(bank->target, &erased, i);
-                       if (retval != ERROR_OK) {
-                               bank->sectors[i].is_erased = -1;
-                       } else {
-                               if (erased)
-                                       bank->sectors[i].is_erased = 1;
-                               else
-                                       bank->sectors[i].is_erased = 0;
-                       }
+               retval = dsp5680xx_f_erase_check(bank->target, &erased, i);
+               if (retval != ERROR_OK) {
+                       bank->sectors[i].is_erased = -1;
+               } else {
+                       if (erased)
+                               bank->sectors[i].is_erased = 1;
+                       else
+                               bank->sectors[i].is_erased = 0;
                }
        }
        return retval;

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)