fm3: add Fujitsu MB9Ax family support

[openocd.git] / src / flash / nor / fm3.c

diff --git a/src/flash/nor/fm3.c b/src/flash/nor/fm3.c
index 32e81798f3a05577da6d471184148ea7d141d7fc..a9a11a311f809b3e07f7f2153210e6a8d853a10f 100644 (file)
--- a/src/flash/nor/fm3.c
+++ b/src/flash/nor/fm3.c
@@ -229,7 +229,7 @@ static int fm3_erase(struct flash_bank *bank, int first, int last)
                return ERROR_TARGET_NOT_HALTED;
        }
 
                return ERROR_TARGET_NOT_HALTED;
        }
 

-       LOG_INFO("Fujitsu MB9Bxxx: Sector Erase ... (%d to %d)", first, last);
+       LOG_INFO("Fujitsu MB9[A/B]FXXX: Sector Erase ... (%d to %d)", first, last);

 
        /* FASZR = 0x01, Enables CPU Programming Mode (16-bit Flash acccess) */
        retval = target_write_u32(target, 0x40000000, 0x0001);
 
        /* FASZR = 0x01, Enables CPU Programming Mode (16-bit Flash acccess) */
        retval = target_write_u32(target, 0x40000000, 0x0001);


@@ -296,7 +296,7 @@ static int fm3_write_block(struct flash_bank *bank, uint8_t *buffer,
 {
        struct fm3_flash_bank *fm3_info = bank->driver_priv;
        struct target *target = bank->target;
 {
        struct fm3_flash_bank *fm3_info = bank->driver_priv;
        struct target *target = bank->target;

-       uint32_t buffer_size = 2048;            /* 8192 for MB9Bxx6! */
+       uint32_t buffer_size = 2048;            /* Default minimum value */

        struct working_area *write_algorithm;
        struct working_area *source;
        uint32_t address = bank->base + offset;
        struct working_area *write_algorithm;
        struct working_area *source;
        uint32_t address = bank->base + offset;


@@ -307,6 +307,10 @@ static int fm3_write_block(struct flash_bank *bank, uint8_t *buffer,
        uint32_t u32FlashSeqAddress1;
        uint32_t u32FlashSeqAddress2;
 
        uint32_t u32FlashSeqAddress1;
        uint32_t u32FlashSeqAddress2;
 

+       /* Increase buffer_size if needed */
+       if (buffer_size < (target->working_area_size / 2))
+               buffer_size = (target->working_area_size / 2);
+

        u32FlashType = (uint32_t) fm3_info->flashtype;
 
        if (u32FlashType == fm3_flash_type1) {
        u32FlashType = (uint32_t) fm3_info->flashtype;
 
        if (u32FlashType == fm3_flash_type1) {


@@ -446,13 +450,13 @@ static int fm3_write_block(struct flash_bank *bank, uint8_t *buffer,
        0x00, 0xBE,                                     /*        BKPT     #0                         */
 
        /* The following address pointers assume, that the code is running from   */
        0x00, 0xBE,                                     /*        BKPT     #0                         */
 
        /* The following address pointers assume, that the code is running from   */

-       /* address 0x1FFF8008. These address pointers will be patched, if a       */
-       /* different start address in RAM is used (e.g. for Flash type 2)!        */
-       0x00, 0x80, 0xFF, 0x1F,     /* u32DummyRead address in RAM (0x1FFF8000)   */
-       0x04, 0x80, 0xFF, 0x1F      /* u32FlashResult address in RAM (0x1FFF8004) */
+       /* SRAM basic-address(BASE_ADDR)+8.These address pointers will be patched */
+       /* if a different start address in RAM is used (e.g. for Flash type 2)!   */
+       0x00, 0x80, 0xFF, 0x1F,     /* u32DummyRead address in RAM (BASE_ADDR)    */
+       0x04, 0x80, 0xFF, 0x1F      /* u32FlashResult address in RAM (BASE_ADDR+4)*/

        };
 
        };
 

-       LOG_INFO("Fujitsu MB9B500: FLASH Write ...");
+       LOG_INFO("Fujitsu MB9[A/B]FXXX: FLASH Write ...");

 
        /* disable HW watchdog */
        retval = target_write_u32(target, 0x40011C00, 0x1ACCE551);
 
        /* disable HW watchdog */
        retval = target_write_u32(target, 0x40011C00, 0x1ACCE551);


@@ -487,8 +491,6 @@ static int fm3_write_block(struct flash_bank *bank, uint8_t *buffer,
        if (retval != ERROR_OK)
                return retval;
 
        if (retval != ERROR_OK)
                return retval;
 

-
-

        /* memory buffer */
        while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK) {
                buffer_size /= 2;
        /* memory buffer */
        while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK) {
                buffer_size /= 2;


@@ -522,7 +524,7 @@ static int fm3_write_block(struct flash_bank *bank, uint8_t *buffer,
                        break;
 
                /* Patching 'local variable address' for different RAM addresses */
                        break;
 
                /* Patching 'local variable address' for different RAM addresses */

-               if (write_algorithm->address != 0x1FFF8008) {
+               if (write_algorithm->address != (target->working_area_phys + 8)) {

                        /* Algorithm: u32DummyRead: */
                        retval = target_write_u32(target, (write_algorithm->address)
                                + sizeof(fm3_flash_write_code) - 8, (write_algorithm->address) - 8);
                        /* Algorithm: u32DummyRead: */
                        retval = target_write_u32(target, (write_algorithm->address)
                                + sizeof(fm3_flash_write_code) - 8, (write_algorithm->address) - 8);