helper/command: change prototype of command_print/command_print_sameline

[openocd.git] / src / flash / nor / kinetis.c

diff --git a/src/flash/nor/kinetis.c b/src/flash/nor/kinetis.c
index 847513502af4bc2ac9dcdd48bdf44fc74742dfde..687a3370b3ecfad51e0b88616dd35974e339ab75 100644 (file)
--- a/src/flash/nor/kinetis.c
+++ b/src/flash/nor/kinetis.c
@@ -2895,7 +2895,7 @@ COMMAND_HANDLER(kinetis_nvm_partition)
                flex_nvm_partition_code = (uint8_t)((sim_fcfg1 >> 8) & 0x0f);
                switch (flex_nvm_partition_code) {
                case 0:
-                       command_print(CMD_CTX, "No EEPROM backup, data flash only");
+                       command_print(CMD, "No EEPROM backup, data flash only");
                        break;
                case 1:
                case 2:
@@ -2903,10 +2903,10 @@ COMMAND_HANDLER(kinetis_nvm_partition)
                case 4:
                case 5:
                case 6:
-                       command_print(CMD_CTX, "EEPROM backup %d KB", 4 << flex_nvm_partition_code);
+                       command_print(CMD, "EEPROM backup %d KB", 4 << flex_nvm_partition_code);
                        break;
                case 8:
-                       command_print(CMD_CTX, "No data flash, EEPROM backup only");
+                       command_print(CMD, "No data flash, EEPROM backup only");
                        break;
                case 0x9:
                case 0xA:
@@ -2914,13 +2914,13 @@ COMMAND_HANDLER(kinetis_nvm_partition)
                case 0xC:
                case 0xD:
                case 0xE:
-                       command_print(CMD_CTX, "data flash %d KB", 4 << (flex_nvm_partition_code & 7));
+                       command_print(CMD, "data flash %d KB", 4 << (flex_nvm_partition_code & 7));
                        break;
                case 0xf:
-                       command_print(CMD_CTX, "No EEPROM backup, data flash only (DEPART not set)");
+                       command_print(CMD, "No EEPROM backup, data flash only (DEPART not set)");
                        break;
                default:
-                       command_print(CMD_CTX, "Unsupported EEPROM backup size code 0x%02" PRIx8, flex_nvm_partition_code);
+                       command_print(CMD, "Unsupported EEPROM backup size code 0x%02" PRIx8, flex_nvm_partition_code);
                }
                return ERROR_OK;
 
@@ -2986,7 +2986,7 @@ COMMAND_HANDLER(kinetis_nvm_partition)
        if (result != ERROR_OK)
                return result;
 
-       command_print(CMD_CTX, "FlexNVM partition set. Please reset MCU.");
+       command_print(CMD, "FlexNVM partition set. Please reset MCU.");
 
        if (k_chip) {
                first_nvm_bank = k_chip->num_pflash_blocks;
@@ -2996,7 +2996,7 @@ COMMAND_HANDLER(kinetis_nvm_partition)
                k_chip->probed = false;
        }
 
-       command_print(CMD_CTX, "FlexNVM banks will be re-probed to set new data flash size.");
+       command_print(CMD, "FlexNVM banks will be re-probed to set new data flash size.");
        return ERROR_OK;
 }
 
@@ -3015,12 +3015,12 @@ COMMAND_HANDLER(kinetis_fcf_source_handler)
        }
 
        if (allow_fcf_writes) {
-               command_print(CMD_CTX, "Arbitrary Flash Configuration Field writes enabled.");
-               command_print(CMD_CTX, "Protection info writes to FCF disabled.");
+               command_print(CMD, "Arbitrary Flash Configuration Field writes enabled.");
+               command_print(CMD, "Protection info writes to FCF disabled.");
                LOG_WARNING("BEWARE: incorrect flash configuration may permanently lock the device.");
        } else {
-               command_print(CMD_CTX, "Protection info writes to Flash Configuration Field enabled.");
-               command_print(CMD_CTX, "Arbitrary FCF writes disabled. Mode safe from unwanted locking of the device.");
+               command_print(CMD, "Protection info writes to Flash Configuration Field enabled.");
+               command_print(CMD, "Arbitrary FCF writes disabled. Mode safe from unwanted locking of the device.");
        }
 
        return ERROR_OK;
@@ -3035,7 +3035,7 @@ COMMAND_HANDLER(kinetis_fopt_handler)
                fcf_fopt = (uint8_t)strtoul(CMD_ARGV[0], NULL, 0);
                fcf_fopt_configured = true;
        } else {
-               command_print(CMD_CTX, "FCF_FOPT 0x%02" PRIx8, fcf_fopt);
+               command_print(CMD, "FCF_FOPT 0x%02" PRIx8, fcf_fopt);
        }
 
        return ERROR_OK;