* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
+ * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
#ifdef HAVE_CONFIG_H
/* Addressess */
#define FLEXRAM 0x14000000
+
+#define FMC_PFB01CR 0x4001f004
#define FTFx_FSTAT 0x40020000
#define FTFx_FCNFG 0x40020001
#define FTFx_FCCOB3 0x40020004
#define SIM_FCFG1 0x4004804c
#define SIM_FCFG2 0x40048050
#define WDOG_STCTRH 0x40052000
+#define SMC_PMCTRL 0x4007E001
+#define SMC_PMSTAT 0x4007E003
+
+/* Values */
+#define PM_STAT_RUN 0x01
+#define PM_STAT_VLPR 0x04
+#define PM_CTRL_RUNM_RUN 0x00
/* Commands */
#define FTFx_CMD_BLOCKSTAT 0x00
FS_PROGRAM_SECTOR = 1,
FS_PROGRAM_LONGWORD = 2,
FS_PROGRAM_PHRASE = 4, /* Unsupported */
+ FS_INVALIDATE_CACHE = 8,
} flash_support;
};
+#define MDM_AP 1
+
#define MDM_REG_STAT 0x00
#define MDM_REG_CTRL 0x04
#define MDM_REG_ID 0xfc
#define MDM_STAT_CORE_SLEEPDEEP (1<<17)
#define MDM_STAT_CORESLEEPING (1<<18)
-#define MEM_CTRL_FMEIP (1<<0)
-#define MEM_CTRL_DBG_DIS (1<<1)
-#define MEM_CTRL_DBG_REQ (1<<2)
-#define MEM_CTRL_SYS_RES_REQ (1<<3)
-#define MEM_CTRL_CORE_HOLD_RES (1<<4)
-#define MEM_CTRL_VLLSX_DBG_REQ (1<<5)
-#define MEM_CTRL_VLLSX_DBG_ACK (1<<6)
-#define MEM_CTRL_VLLSX_STAT_ACK (1<<7)
+#define MDM_CTRL_FMEIP (1<<0)
+#define MDM_CTRL_DBG_DIS (1<<1)
+#define MDM_CTRL_DBG_REQ (1<<2)
+#define MDM_CTRL_SYS_RES_REQ (1<<3)
+#define MDM_CTRL_CORE_HOLD_RES (1<<4)
+#define MDM_CTRL_VLLSX_DBG_REQ (1<<5)
+#define MDM_CTRL_VLLSX_DBG_ACK (1<<6)
+#define MDM_CTRL_VLLSX_STAT_ACK (1<<7)
#define MDM_ACCESS_TIMEOUT 3000 /* iterations */
int retval;
LOG_DEBUG("MDM_REG[0x%02x] <- %08" PRIX32, reg, value);
- retval = dap_queue_ap_write(dap_ap(dap, 1), reg, value);
+ retval = dap_queue_ap_write(dap_ap(dap, MDM_AP), reg, value);
if (retval != ERROR_OK) {
LOG_DEBUG("MDM: failed to queue a write request");
return retval;
{
int retval;
- retval = dap_queue_ap_read(dap_ap(dap, 1), reg, result);
+ retval = dap_queue_ap_read(dap_ap(dap, MDM_AP), reg, result);
if (retval != ERROR_OK) {
LOG_DEBUG("MDM: failed to queue a read request");
return retval;
return ERROR_FAIL;
}
+/*
+ * This command can be used to break a watchdog reset loop when
+ * connecting to an unsecured target. Unlike other commands, halt will
+ * automatically retry as it does not know how far into the boot process
+ * it is when the command is called.
+ */
+COMMAND_HANDLER(kinetis_mdm_halt)
+{
+ struct target *target = get_current_target(CMD_CTX);
+ struct cortex_m_common *cortex_m = target_to_cm(target);
+ struct adiv5_dap *dap = cortex_m->armv7m.arm.dap;
+ int retval;
+ int tries = 0;
+ uint32_t stat;
+
+ if (!dap) {
+ LOG_ERROR("Cannot perform halt with a high-level adapter");
+ return ERROR_FAIL;
+ }
+
+ while (true) {
+ tries++;
+
+ kinetis_mdm_write_register(dap, MDM_REG_CTRL, MDM_CTRL_CORE_HOLD_RES);
+
+ alive_sleep(1);
+
+ retval = kinetis_mdm_read_register(dap, MDM_REG_STAT, &stat);
+ if (retval != ERROR_OK) {
+ LOG_DEBUG("MDM: failed to read MDM_REG_STAT");
+ continue;
+ }
+
+ /* Repeat setting MDM_CTRL_CORE_HOLD_RES until system is out of
+ * reset with flash ready and without security
+ */
+ if ((stat & (MDM_STAT_FREADY | MDM_STAT_SYSSEC | MDM_STAT_SYSRES))
+ == (MDM_STAT_FREADY | MDM_STAT_SYSRES))
+ break;
+
+ if (tries > MDM_ACCESS_TIMEOUT) {
+ LOG_ERROR("MDM: halt timed out");
+ return ERROR_FAIL;
+ }
+ }
+
+ LOG_DEBUG("MDM: halt succeded after %d attempts.", tries);
+
+ target_poll(target);
+ /* enable polling in case kinetis_check_flash_security_status disabled it */
+ jtag_poll_set_enabled(true);
+
+ alive_sleep(100);
+
+ target->reset_halt = true;
+ target->type->assert_reset(target);
+
+ retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, 0);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM: failed to clear MDM_REG_CTRL");
+ return retval;
+ }
+
+ target->type->deassert_reset(target);
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(kinetis_mdm_reset)
+{
+ struct target *target = get_current_target(CMD_CTX);
+ struct cortex_m_common *cortex_m = target_to_cm(target);
+ struct adiv5_dap *dap = cortex_m->armv7m.arm.dap;
+ int retval;
+
+ if (!dap) {
+ LOG_ERROR("Cannot perform reset with a high-level adapter");
+ return ERROR_FAIL;
+ }
+
+ retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, MDM_CTRL_SYS_RES_REQ);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM: failed to write MDM_REG_CTRL");
+ return retval;
+ }
+
+ retval = kinetis_mdm_poll_register(dap, MDM_REG_STAT, MDM_STAT_SYSRES, 0);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM: failed to assert reset");
+ return retval;
+ }
+
+ retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, 0);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM: failed to clear MDM_REG_CTRL");
+ return retval;
+ }
+
+ return ERROR_OK;
+}
+
/*
* This function implements the procedure to mass erase the flash via
* SWD/JTAG on Kinetis K and L series of devices as it is described in
* AN4835 "Production Flash Programming Best Practices for Kinetis K-
- * and L-series MCUs" Section 4.2.1
+ * and L-series MCUs" Section 4.2.1. To prevent a watchdog reset loop,
+ * the core remains halted after this function completes as suggested
+ * by the application note.
*/
COMMAND_HANDLER(kinetis_mdm_mass_erase)
{
* establishing communication...
*/
- /* assert SRST */
- if (jtag_get_reset_config() & RESET_HAS_SRST)
+ /* assert SRST if configured */
+ bool has_srst = jtag_get_reset_config() & RESET_HAS_SRST;
+ if (has_srst)
adapter_assert_reset();
- else
- LOG_WARNING("Attempting mass erase without hardware reset. This is not reliable; "
- "it's recommended you connect SRST and use ``reset_config srst_only''.");
- retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, MEM_CTRL_SYS_RES_REQ);
- if (retval != ERROR_OK)
- return retval;
+ retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, MDM_CTRL_SYS_RES_REQ);
+ if (retval != ERROR_OK && !has_srst) {
+ LOG_ERROR("MDM: failed to assert reset");
+ goto deassert_reset_and_exit;
+ }
+
+ /*
+ * ... Read the MDM-AP status register Mass Erase Enable bit to
+ * determine if the mass erase command is enabled. If Mass Erase
+ * Enable = 0, then mass erase is disabled and the processor
+ * cannot be erased or unsecured. If Mass Erase Enable = 1, then
+ * the mass erase command can be used...
+ */
+ uint32_t stat;
+
+ retval = kinetis_mdm_read_register(dap, MDM_REG_STAT, &stat);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM: failed to read MDM_REG_STAT");
+ goto deassert_reset_and_exit;
+ }
+
+ if (!(stat & MDM_STAT_FMEEN)) {
+ LOG_ERROR("MDM: mass erase is disabled");
+ goto deassert_reset_and_exit;
+ }
+
+ if ((stat & MDM_STAT_SYSSEC) && !(jtag_get_reset_config() & RESET_HAS_SRST)) {
+ LOG_ERROR("Mass erase of a secured MCU is not possible without hardware reset.");
+ LOG_INFO("Connect SRST and use 'reset_config srst_only'.");
+ goto deassert_reset_and_exit;
+ }
/*
- * ... Read the MDM-AP status register until the Flash Ready bit sets...
+ * ... Read the MDM-AP status register until the Flash Ready bit sets
+ * and System Reset is asserted...
*/
retval = kinetis_mdm_poll_register(dap, MDM_REG_STAT,
MDM_STAT_FREADY | MDM_STAT_SYSRES,
MDM_STAT_FREADY);
if (retval != ERROR_OK) {
- LOG_ERROR("MDM : flash ready timeout");
- return retval;
+ LOG_ERROR("MDM: flash ready / system reset timeout");
+ goto deassert_reset_and_exit;
}
/*
* Erase in Progress bit. This will start the mass erase
* process...
*/
- retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL,
- MEM_CTRL_SYS_RES_REQ | MEM_CTRL_FMEIP);
- if (retval != ERROR_OK)
- return retval;
-
- /* As a sanity check make sure that device started mass erase procedure */
- retval = kinetis_mdm_poll_register(dap, MDM_REG_STAT,
- MDM_STAT_FMEACK, MDM_STAT_FMEACK);
- if (retval != ERROR_OK)
- return retval;
+ retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, MDM_CTRL_SYS_RES_REQ | MDM_CTRL_FMEIP);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM: failed to start mass erase");
+ goto deassert_reset_and_exit;
+ }
/*
* ... Read the MDM-AP control register until the Flash Mass
* Erase in Progress bit clears...
*/
- retval = kinetis_mdm_poll_register(dap, MDM_REG_CTRL,
- MEM_CTRL_FMEIP,
- 0);
- if (retval != ERROR_OK)
- return retval;
+ retval = kinetis_mdm_poll_register(dap, MDM_REG_CTRL, MDM_CTRL_FMEIP, 0);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM: mass erase timeout");
+ goto deassert_reset_and_exit;
+ }
+
+ target_poll(target);
+ /* enable polling in case kinetis_check_flash_security_status disabled it */
+ jtag_poll_set_enabled(true);
+
+ alive_sleep(100);
+
+ target->reset_halt = true;
+ target->type->assert_reset(target);
/*
* ... Negate the RESET signal or clear the System Reset Request
- * bit in the MDM-AP control register...
+ * bit in the MDM-AP control register.
*/
retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, 0);
if (retval != ERROR_OK)
- return retval;
+ LOG_ERROR("MDM: failed to clear MDM_REG_CTRL");
- if (jtag_get_reset_config() & RESET_HAS_SRST) {
- /* halt MCU otherwise it loops in hard fault - WDOG reset cycle */
- target->reset_halt = true;
- target->type->assert_reset(target);
- target->type->deassert_reset(target);
- }
+ target->type->deassert_reset(target);
- return ERROR_OK;
+ return retval;
+
+deassert_reset_and_exit:
+ kinetis_mdm_write_register(dap, MDM_REG_CTRL, 0);
+ if (has_srst)
+ adapter_deassert_reset();
+ return retval;
}
static const uint32_t kinetis_known_mdm_ids[] = {
retval = kinetis_mdm_read_register(dap, MDM_REG_ID, &val);
if (retval != ERROR_OK) {
LOG_ERROR("MDM: failed to read ID register");
- goto fail;
+ return ERROR_OK;
}
+ if (val == 0)
+ return ERROR_OK;
+
bool found = false;
for (size_t i = 0; i < ARRAY_SIZE(kinetis_known_mdm_ids); i++) {
if (val == kinetis_known_mdm_ids[i]) {
if (!found)
LOG_WARNING("MDM: unknown ID %08" PRIX32, val);
- /*
- * ... Read the MDM-AP status register until the Flash Ready bit sets...
- */
- retval = kinetis_mdm_poll_register(dap, MDM_REG_STAT,
- MDM_STAT_FREADY,
- MDM_STAT_FREADY);
- if (retval != ERROR_OK) {
- LOG_ERROR("MDM: flash ready timeout");
- goto fail;
- }
-
/*
* ... Read the System Security bit to determine if security is enabled.
* If System Security = 0, then proceed. If System Security = 1, then
retval = kinetis_mdm_read_register(dap, MDM_REG_STAT, &val);
if (retval != ERROR_OK) {
LOG_ERROR("MDM: failed to read MDM_REG_STAT");
- goto fail;
+ return ERROR_OK;
}
- if ((val & (MDM_STAT_SYSSEC | MDM_STAT_CORE_HALTED)) == MDM_STAT_SYSSEC) {
- LOG_WARNING("MDM: Secured MCU state detected however it may be a false alarm");
- LOG_WARNING("MDM: Halting target to detect secured state reliably");
+ /*
+ * System Security bit is also active for short time during reset.
+ * If a MCU has blank flash and runs in RESET/WDOG loop,
+ * System Security bit is active most of time!
+ * We should observe Flash Ready bit and read status several times
+ * to avoid false detection of secured MCU
+ */
+ int secured_score = 0, flash_not_ready_score = 0;
- retval = target_halt(target);
- if (retval == ERROR_OK)
- retval = target_wait_state(target, TARGET_HALTED, 100);
+ if ((val & (MDM_STAT_SYSSEC | MDM_STAT_FREADY)) != MDM_STAT_FREADY) {
+ uint32_t stats[32];
+ int i;
- if (retval != ERROR_OK) {
- LOG_WARNING("MDM: Target not halted, trying reset halt");
- target->reset_halt = true;
- target->type->assert_reset(target);
- target->type->deassert_reset(target);
+ for (i = 0; i < 32; i++) {
+ stats[i] = MDM_STAT_FREADY;
+ dap_queue_ap_read(dap_ap(dap, MDM_AP), MDM_REG_STAT, &stats[i]);
}
-
- /* re-read status */
- retval = kinetis_mdm_read_register(dap, MDM_REG_STAT, &val);
+ retval = dap_run(dap);
if (retval != ERROR_OK) {
- LOG_ERROR("MDM: failed to read MDM_REG_STAT");
- goto fail;
+ LOG_DEBUG("MDM: dap_run failed when validating secured state");
+ return ERROR_OK;
+ }
+ for (i = 0; i < 32; i++) {
+ if (stats[i] & MDM_STAT_SYSSEC)
+ secured_score++;
+ if (!(stats[i] & MDM_STAT_FREADY))
+ flash_not_ready_score++;
}
}
- if (val & MDM_STAT_SYSSEC) {
+ if (flash_not_ready_score <= 8 && secured_score > 24) {
jtag_poll_set_enabled(false);
LOG_WARNING("*********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! **********");
LOG_WARNING("**** command, power cycle the MCU and restart OpenOCD. ****");
LOG_WARNING("**** ****");
LOG_WARNING("*********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! **********");
+
+ } else if (flash_not_ready_score > 24) {
+ jtag_poll_set_enabled(false);
+ LOG_WARNING("**** Your Kinetis MCU is probably locked-up in RESET/WDOG loop. ****");
+ LOG_WARNING("**** Common reason is a blank flash (at least a reset vector). ****");
+ LOG_WARNING("**** Issue 'kinetis mdm halt' command or if SRST is connected ****");
+ LOG_WARNING("**** and configured, use 'reset halt' ****");
+ LOG_WARNING("**** If MCU cannot be halted, it is likely secured and running ****");
+ LOG_WARNING("**** in RESET/WDOG loop. Issue 'kinetis mdm mass_erase' ****");
+
} else {
LOG_INFO("MDM: Chip is unsecured. Continuing.");
jtag_poll_set_enabled(true);
}
return ERROR_OK;
-
-fail:
- LOG_ERROR("MDM: Failed to check security status of the MCU. Cannot proceed further");
- jtag_poll_set_enabled(false);
- return retval;
}
FLASH_BANK_COMMAND_HANDLER(kinetis_flash_bank_command)
int retval;
static const uint8_t kinetis_unlock_wdog_code[] = {
- /* WDOG_UNLOCK = 0xC520 */
- 0x4f, 0xf4, 0x00, 0x53, /* mov.w r3, #8192 ; 0x2000 */
- 0xc4, 0xf2, 0x05, 0x03, /* movt r3, #16389 ; 0x4005 */
- 0x4c, 0xf2, 0x20, 0x52, /* movw r2, #50464 ; 0xc520 */
- 0xda, 0x81, /* strh r2, [r3, #14] */
-
- /* WDOG_UNLOCK = 0xD928 */
- 0x4f, 0xf4, 0x00, 0x53, /* mov.w r3, #8192 ; 0x2000 */
- 0xc4, 0xf2, 0x05, 0x03, /* movt r3, #16389 ; 0x4005 */
- 0x4d, 0xf6, 0x28, 0x12, /* movw r2, #55592 ; 0xd928 */
- 0xda, 0x81, /* strh r2, [r3, #14] */
-
- /* WDOG_SCR = 0x1d2 */
- 0x4f, 0xf4, 0x00, 0x53, /* mov.w r3, #8192 ; 0x2000 */
- 0xc4, 0xf2, 0x05, 0x03, /* movt r3, #16389 ; 0x4005 */
- 0x4f, 0xf4, 0xe9, 0x72, /* mov.w r2, #466 ; 0x1d2 */
- 0x1a, 0x80, /* strh r2, [r3, #0] */
-
- /* END */
- 0x00, 0xBE, /* bkpt #0 */
+#include "../../../contrib/loaders/watchdog/armv7m_kinetis_wdog.inc"
};
/* Decide whether the connected device needs watchdog disabling.
- * Disable for all Kx devices, i.e., return if it is a KLx */
+ * Disable for all Kx and KVx devices, return if it is a KLx */
if ((sim_sdid & KINETIS_SDID_SERIESID_MASK) == KINETIS_SDID_SERIESID_KL)
return ERROR_OK;
}
-static int kinetis_erase(struct flash_bank *bank, int first, int last)
+static int kinetis_check_run_mode(struct target *target)
{
int result, i;
- struct kinetis_flash_bank *kinfo = bank->driver_priv;
+ uint8_t pmctrl, pmstat;
- if (bank->target->state != TARGET_HALTED) {
+ if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
+ result = target_read_u8(target, SMC_PMSTAT, &pmstat);
+ if (result != ERROR_OK)
+ return result;
+
+ if (pmstat == PM_STAT_RUN)
+ return ERROR_OK;
+
+ if (pmstat == PM_STAT_VLPR) {
+ /* It is safe to switch from VLPR to RUN mode without changing clock */
+ LOG_INFO("Switching from VLPR to RUN mode.");
+ pmctrl = PM_CTRL_RUNM_RUN;
+ result = target_write_u8(target, SMC_PMCTRL, pmctrl);
+ if (result != ERROR_OK)
+ return result;
+
+ for (i = 100; i; i--) {
+ result = target_read_u8(target, SMC_PMSTAT, &pmstat);
+ if (result != ERROR_OK)
+ return result;
+
+ if (pmstat == PM_STAT_RUN)
+ return ERROR_OK;
+ }
+ }
+
+ LOG_ERROR("Flash operation not possible in current run mode: SMC_PMSTAT: 0x%x", pmstat);
+ LOG_ERROR("Issue a 'reset init' command.");
+ return ERROR_TARGET_NOT_HALTED;
+}
+
+
+static void kinetis_invalidate_flash_cache(struct flash_bank *bank)
+{
+ struct kinetis_flash_bank *kinfo = bank->driver_priv;
+ uint8_t pfb01cr_byte2 = 0xf0;
+
+ if (!(kinfo->flash_support & FS_INVALIDATE_CACHE))
+ return;
+
+ target_write_memory(bank->target, FMC_PFB01CR + 2, 1, 1, &pfb01cr_byte2);
+ return;
+}
+
+
+static int kinetis_erase(struct flash_bank *bank, int first, int last)
+{
+ int result, i;
+ struct kinetis_flash_bank *kinfo = bank->driver_priv;
+
+ result = kinetis_check_run_mode(bank->target);
+ if (result != ERROR_OK)
+ return result;
+
if ((first > bank->num_sectors) || (last > bank->num_sectors))
return ERROR_FLASH_OPERATION_FAILED;
bank->sectors[i].is_erased = 1;
}
+ kinetis_invalidate_flash_cache(bank);
+
if (first == 0) {
LOG_WARNING
("flash configuration field erased, please reset the device");
struct kinetis_flash_bank *kinfo = bank->driver_priv;
uint8_t *new_buffer = NULL;
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
+ result = kinetis_check_run_mode(bank->target);
+ if (result != ERROR_OK)
+ return result;
if (!(kinfo->flash_support & FS_PROGRAM_SECTOR)) {
/* fallback to longword write */
return ERROR_FLASH_OPERATION_FAILED;
}
+ kinetis_invalidate_flash_cache(bank);
return ERROR_OK;
}
-static int kinetis_read_part_info(struct flash_bank *bank)
+static int kinetis_probe(struct flash_bank *bank)
{
int result, i;
uint32_t offset = 0;
uint8_t fcfg1_nvmsize, fcfg1_pfsize, fcfg1_eesize, fcfg1_depart;
- uint8_t fcfg2_pflsh;
+ uint8_t fcfg2_maxaddr0, fcfg2_pflsh, fcfg2_maxaddr1;
uint32_t nvm_size = 0, pf_size = 0, df_size = 0, ee_size = 0;
unsigned num_blocks = 0, num_pflash_blocks = 0, num_nvm_blocks = 0, first_nvm_bank = 0,
pflash_sector_size_bytes = 0, nvm_sector_size_bytes = 0;
pflash_sector_size_bytes = 1<<10;
nvm_sector_size_bytes = 1<<10;
num_blocks = 2;
- kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_PROGRAM_SECTOR;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE;
break;
case KINETIS_K_SDID_K10_M72:
case KINETIS_K_SDID_K20_M72:
pflash_sector_size_bytes = 2<<10;
nvm_sector_size_bytes = 1<<10;
num_blocks = 2;
- kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_PROGRAM_SECTOR;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE;
kinfo->max_flash_prog_size = 1<<10;
break;
case KINETIS_K_SDID_K10_M100:
pflash_sector_size_bytes = 2<<10;
nvm_sector_size_bytes = 2<<10;
num_blocks = 2;
- kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_PROGRAM_SECTOR;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE;
break;
case KINETIS_K_SDID_K21_M120:
case KINETIS_K_SDID_K22_M120:
kinfo->max_flash_prog_size = 1<<10;
nvm_sector_size_bytes = 4<<10;
num_blocks = 2;
- kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE;
break;
case KINETIS_K_SDID_K10_M120:
case KINETIS_K_SDID_K20_M120:
pflash_sector_size_bytes = 4<<10;
nvm_sector_size_bytes = 4<<10;
num_blocks = 4;
- kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE;
break;
default:
LOG_ERROR("Unsupported K-family FAMID");
/* K02FN64, K02FN128: FTFA, 2kB sectors */
pflash_sector_size_bytes = 2<<10;
num_blocks = 1;
- kinfo->flash_support = FS_PROGRAM_LONGWORD;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_INVALIDATE_CACHE;
break;
case KINETIS_SDID_FAMILYID_K2X | KINETIS_SDID_SUBFAMID_KX2: {
/* MK24FN1M */
pflash_sector_size_bytes = 4<<10;
num_blocks = 2;
- kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE;
kinfo->max_flash_prog_size = 1<<10;
break;
}
|| (kinfo->sim_sdid & (KINETIS_SDID_DIEID_MASK)) == KINETIS_SDID_DIEID_K22FN512) {
/* K22 with new-style SDID - smaller pflash with FTFA, 2kB sectors */
pflash_sector_size_bytes = 2<<10;
- num_blocks = 2; /* 1 or 2 blocks */
- kinfo->flash_support = FS_PROGRAM_LONGWORD;
+ /* autodetect 1 or 2 blocks */
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_INVALIDATE_CACHE;
break;
}
LOG_ERROR("Unsupported Kinetis K22 DIEID");
if ((kinfo->sim_sdid & (KINETIS_SDID_DIEID_MASK)) == KINETIS_SDID_DIEID_K24FN256) {
/* K24FN256 - smaller pflash with FTFA */
num_blocks = 1;
- kinfo->flash_support = FS_PROGRAM_LONGWORD;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_INVALIDATE_CACHE;
break;
}
/* K24FN1M without errata 7534 */
num_blocks = 2;
- kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE;
kinfo->max_flash_prog_size = 1<<10;
break;
nvm_sector_size_bytes = 4<<10;
kinfo->max_flash_prog_size = 1<<10;
num_blocks = 2;
- kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE;
break;
case KINETIS_SDID_FAMILYID_K2X | KINETIS_SDID_SUBFAMID_KX6:
nvm_sector_size_bytes = 4<<10;
kinfo->max_flash_prog_size = 1<<10;
num_blocks = 4;
- kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR | FS_INVALIDATE_CACHE;
break;
default:
LOG_ERROR("Unsupported Kinetis FAMILYID SUBFAMID");
}
break;
+
case KINETIS_SDID_SERIESID_KL:
/* KL-series */
pflash_sector_size_bytes = 1<<10;
nvm_sector_size_bytes = 1<<10;
- num_blocks = 1;
+ /* autodetect 1 or 2 blocks */
kinfo->flash_support = FS_PROGRAM_LONGWORD;
break;
+
+ case KINETIS_SDID_SERIESID_KV:
+ /* KV-series */
+ switch (kinfo->sim_sdid & (KINETIS_SDID_FAMILYID_MASK | KINETIS_SDID_SUBFAMID_MASK)) {
+ case KINETIS_SDID_FAMILYID_K1X | KINETIS_SDID_SUBFAMID_KX0:
+ /* KV10: FTFA, 1kB sectors */
+ pflash_sector_size_bytes = 1<<10;
+ num_blocks = 1;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD;
+ break;
+
+ case KINETIS_SDID_FAMILYID_K1X | KINETIS_SDID_SUBFAMID_KX1:
+ /* KV11: FTFA, 2kB sectors */
+ pflash_sector_size_bytes = 2<<10;
+ num_blocks = 1;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD;
+ break;
+
+ case KINETIS_SDID_FAMILYID_K3X | KINETIS_SDID_SUBFAMID_KX0:
+ /* KV30: FTFA, 2kB sectors, 1 block */
+ case KINETIS_SDID_FAMILYID_K3X | KINETIS_SDID_SUBFAMID_KX1:
+ /* KV31: FTFA, 2kB sectors, 2 blocks */
+ pflash_sector_size_bytes = 2<<10;
+ /* autodetect 1 or 2 blocks */
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_INVALIDATE_CACHE;
+ break;
+
+ case KINETIS_SDID_FAMILYID_K4X | KINETIS_SDID_SUBFAMID_KX2:
+ case KINETIS_SDID_FAMILYID_K4X | KINETIS_SDID_SUBFAMID_KX4:
+ case KINETIS_SDID_FAMILYID_K4X | KINETIS_SDID_SUBFAMID_KX6:
+ /* KV4x: FTFA, 4kB sectors */
+ pflash_sector_size_bytes = 4<<10;
+ num_blocks = 1;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_INVALIDATE_CACHE;
+ break;
+
+ default:
+ LOG_ERROR("Unsupported KV FAMILYID SUBFAMID");
+ }
+ break;
+
default:
LOG_ERROR("Unsupported K-series");
}
fcfg1_depart = (uint8_t)((kinfo->sim_fcfg1 >> 8) & 0x0f);
fcfg2_pflsh = (uint8_t)((kinfo->sim_fcfg2 >> 23) & 0x01);
+ fcfg2_maxaddr0 = (uint8_t)((kinfo->sim_fcfg2 >> 24) & 0x7f);
+ fcfg2_maxaddr1 = (uint8_t)((kinfo->sim_fcfg2 >> 16) & 0x7f);
+
+ if (num_blocks == 0)
+ num_blocks = fcfg2_maxaddr1 ? 2 : 1;
+ else if (fcfg2_maxaddr1 == 0 && num_blocks >= 2) {
+ num_blocks = 1;
+ LOG_WARNING("MAXADDR1 is zero, number of flash banks adjusted to 1");
+ } else if (fcfg2_maxaddr1 != 0 && num_blocks == 1) {
+ num_blocks = 2;
+ LOG_WARNING("MAXADDR1 is non zero, number of flash banks adjusted to 2");
+ }
/* when the PFLSH bit is set, there is no FlexNVM/FlexRAM */
if (!fcfg2_pflsh) {
pf_size = 1 << (14 + (fcfg1_pfsize >> 1));
break;
case 0x0f:
- if (pflash_sector_size_bytes >= 4<<10)
- pf_size = 1024<<10;
- else if (fcfg2_pflsh)
- pf_size = 512<<10;
+ /* a peculiar case: Freescale states different sizes for 0xf
+ * K02P64M100SFARM 128 KB ... duplicate of code 0x7
+ * K22P121M120SF8RM 256 KB ... duplicate of code 0x9
+ * K22P121M120SF7RM 512 KB ... duplicate of code 0xb
+ * K22P100M120SF5RM 1024 KB ... duplicate of code 0xd
+ * K26P169M180SF5RM 2048 KB ... the only unique value
+ * fcfg2_maxaddr0 seems to be the only clue to pf_size
+ * Checking fcfg2_maxaddr0 later in this routine is pointless then
+ */
+ if (fcfg2_pflsh)
+ pf_size = ((uint32_t)fcfg2_maxaddr0 << 13) * num_blocks;
else
- pf_size = 256<<10;
+ pf_size = ((uint32_t)fcfg2_maxaddr0 << 13) * num_blocks / 2;
+ if (pf_size != 2048<<10)
+ LOG_WARNING("SIM_FCFG1 PFSIZE = 0xf: please check if pflash is %u KB", pf_size>>10);
+
break;
default:
pf_size = 0;
bank->base = 0x00000000 + bank->size * bank->bank_number;
kinfo->prog_base = bank->base;
kinfo->sector_size = pflash_sector_size_bytes;
- kinfo->protection_size = pf_size / 32;
+ /* pflash is divided into 32 protection areas for
+ * parts with more than 32K of PFlash. For parts with
+ * less the protection unit is set to 1024 bytes */
+ kinfo->protection_size = MAX(pf_size / 32, 1024);
kinfo->protection_block = (32 / num_pflash_blocks) * bank->bank_number;
} else if ((unsigned)bank->bank_number < num_blocks) {
return ERROR_FLASH_BANK_INVALID;
}
+ if (bank->bank_number == 0 && ((uint32_t)fcfg2_maxaddr0 << 13) != bank->size)
+ LOG_WARNING("MAXADDR0 0x%02" PRIx8 " check failed,"
+ " please report to OpenOCD mailing list", fcfg2_maxaddr0);
+ if (fcfg2_pflsh) {
+ if (bank->bank_number == 1 && ((uint32_t)fcfg2_maxaddr1 << 13) != bank->size)
+ LOG_WARNING("MAXADDR1 0x%02" PRIx8 " check failed,"
+ " please report to OpenOCD mailing list", fcfg2_maxaddr1);
+ } else {
+ if ((unsigned)bank->bank_number == first_nvm_bank
+ && ((uint32_t)fcfg2_maxaddr1 << 13) != df_size)
+ LOG_WARNING("FlexNVM MAXADDR1 0x%02" PRIx8 " check failed,"
+ " please report to OpenOCD mailing list", fcfg2_maxaddr1);
+ }
+
if (bank->sectors) {
free(bank->sectors);
bank->sectors = NULL;
return ERROR_OK;
}
-static int kinetis_probe(struct flash_bank *bank)
-{
- if (bank->target->state != TARGET_HALTED) {
- LOG_WARNING("Cannot communicate... target not halted.");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- return kinetis_read_part_info(bank);
-}
-
static int kinetis_auto_probe(struct flash_bank *bank)
{
struct kinetis_flash_bank *kinfo = bank->driver_priv;
static int kinetis_blank_check(struct flash_bank *bank)
{
struct kinetis_flash_bank *kinfo = bank->driver_priv;
+ int result;
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
+ /* suprisingly blank check does not work in VLPR and HSRUN modes */
+ result = kinetis_check_run_mode(bank->target);
+ if (result != ERROR_OK)
+ return result;
if (kinfo->flash_class == FC_PFLASH || kinfo->flash_class == FC_FLEX_NVM) {
- int result;
bool block_dirty = false;
uint8_t ftfx_fstat;
LOG_INFO("DEPART 0x%" PRIx8 ", EEPROM size code 0x%" PRIx8,
flex_nvm_partition_code, ee_size_code);
- if (target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
+ result = kinetis_check_run_mode(target);
+ if (result != ERROR_OK)
+ return result;
result = kinetis_ftfx_command(target, FTFx_CMD_PGMPART, load_flex_ram,
ee_size_code, flex_nvm_partition_code, 0, 0,
}
-static const struct command_registration kinetis_securtiy_command_handlers[] = {
+static const struct command_registration kinetis_security_command_handlers[] = {
{
.name = "check_security",
.mode = COMMAND_EXEC,
- .help = "",
+ .help = "Check status of device security lock",
.usage = "",
.handler = kinetis_check_flash_security_status,
},
+ {
+ .name = "halt",
+ .mode = COMMAND_EXEC,
+ .help = "Issue a halt via the MDM-AP",
+ .usage = "",
+ .handler = kinetis_mdm_halt,
+ },
{
.name = "mass_erase",
.mode = COMMAND_EXEC,
- .help = "",
+ .help = "Issue a complete flash erase via the MDM-AP",
.usage = "",
.handler = kinetis_mdm_mass_erase,
},
+ { .name = "reset",
+ .mode = COMMAND_EXEC,
+ .help = "Issue a reset via the MDM-AP",
+ .usage = "",
+ .handler = kinetis_mdm_reset,
+ },
COMMAND_REGISTRATION_DONE
};
{
.name = "mdm",
.mode = COMMAND_ANY,
- .help = "",
+ .help = "MDM-AP command group",
.usage = "",
- .chain = kinetis_securtiy_command_handlers,
+ .chain = kinetis_security_command_handlers,
},
{
.name = "disable_wdog",
{
.name = "kinetis",
.mode = COMMAND_ANY,
- .help = "kinetis flash controller commands",
+ .help = "Kinetis flash controller commands",
.usage = "",
.chain = kinetis_exec_command_handlers,
},
Code Review / openocd.git / blobdiff