* Copyright (C) 2012 by Christopher D. Kilgour *
* techie at whiterocker.com *
* *
+ * Copyright (C) 2013 Nemui Trinomius *
+ * nemuisan_kawausogasuki@live.jp *
+ * *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
***************************************************************************/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
+#include "jtag/interface.h"
#include "imp.h"
-#include "helper/binarybuffer.h"
+#include <helper/binarybuffer.h>
+#include <target/algorithm.h>
+#include <target/armv7m.h>
+#include <target/cortex_m.h>
/*
* Implementation Notes
* variants also have FlexNVM and FlexRAM, which always appear
* together.
*
- * A given Kinetis chip may have 2 or 4 blocks of flash. Here we map
+ * A given Kinetis chip may have 1, 2 or 4 blocks of flash. Here we map
* each block to a separate bank. Each block size varies by chip and
* may be determined by the read-only SIM_FCFG1 register. The sector
- * size within each bank/block varies by the chip granularity as
- * described below.
- *
- * Kinetis offers four different of flash granularities applicable
- * across the chip families. The granularity is apparently reflected
- * by at least the reference manual suffix. For example, for chip
- * MK60FN1M0VLQ12, reference manual K60P144M150SF3RM ends in "SF3RM",
- * where the "3" indicates there are four flash blocks with 4kiB
- * sectors. All possible granularities are indicated below.
+ * size within each bank/block varies by chip, and may be 1, 2 or 4k.
+ * The sector size may be different for flash and FlexNVM.
*
- * The first half of the flash (1 or 2 blocks, depending on the
- * granularity) is always Program Flash and always starts at address
- * 0x00000000. The "PFLSH" flag, bit 23 of the read-only SIM_FCFG2
- * register, determines whether the second half of the flash is also
- * Program Flash or FlexNVM+FlexRAM. When PFLSH is set, the second
- * half of flash is Program Flash and is contiguous in the memory map
- * from the first half. When PFLSH is clear, the second half of flash
- * is FlexNVM and always starts at address 0x10000000. FlexRAM, which
- * is also present when PFLSH is clear, always starts at address
- * 0x14000000.
+ * The first half of the flash (1 or 2 blocks) is always Program Flash
+ * and always starts at address 0x00000000. The "PFLSH" flag, bit 23
+ * of the read-only SIM_FCFG2 register, determines whether the second
+ * half of the flash is also Program Flash or FlexNVM+FlexRAM. When
+ * PFLSH is set, the second from the first half. When PFLSH is clear,
+ * the second half of flash is FlexNVM and always starts at address
+ * 0x10000000. FlexRAM, which is also present when PFLSH is clear,
+ * always starts at address 0x14000000.
*
* The Flash Memory Module provides a register set where flash
* commands are loaded to perform flash operations like erase and
* program. Different commands are available depending on whether
* Program Flash or FlexNVM/FlexRAM is being manipulated. Although
* the commands used are quite consistent between flash blocks, the
- * parameters they accept differ according to the flash granularity.
- * Some Kinetis chips have different granularity between Program Flash
- * and FlexNVM/FlexRAM, so flash command arguments may differ between
- * blocks in the same chip.
+ * parameters they accept differ according to the flash sector size.
*
- * Although not documented as such by Freescale, it appears that bits
- * 8:7 of the read-only SIM_SDID register reflect the granularity
- * settings 0..3, so sector sizes and block counts are applicable
- * according to the following table.
*/
-const struct {
- unsigned pflash_sector_size_bytes;
- unsigned nvm_sector_size_bytes;
- unsigned num_blocks;
-} kinetis_flash_params[4] = {
- { 1<<10, 1<<10, 2 },
- { 2<<10, 1<<10, 2 },
- { 2<<10, 2<<10, 2 },
- { 4<<10, 4<<10, 4 }
-};
/* Addressess */
#define FLEXRAM 0x14000000
#define FTFx_FCCOB3 0x40020004
#define FTFx_FPROT3 0x40020010
#define SIM_SDID 0x40048024
+#define SIM_SOPT1 0x40047000
#define SIM_FCFG1 0x4004804c
#define SIM_FCFG2 0x40048050
/* Commands */
-#define FTFx_CMD_BLOCKSTAT 0x00
-#define FTFx_CMD_SECTSTAT 0x01
-#define FTFx_CMD_LWORDPROG 0x06
-#define FTFx_CMD_SECTERASE 0x09
-#define FTFx_CMD_SECTWRITE 0x0b
+#define FTFx_CMD_BLOCKSTAT 0x00
+#define FTFx_CMD_SECTSTAT 0x01
+#define FTFx_CMD_LWORDPROG 0x06
+#define FTFx_CMD_SECTERASE 0x09
+#define FTFx_CMD_SECTWRITE 0x0b
#define FTFx_CMD_SETFLEXRAM 0x81
+#define FTFx_CMD_MASSERASE 0x44
+
+/* The older Kinetis K series uses the following SDID layout :
+ * Bit 31-16 : 0
+ * Bit 15-12 : REVID
+ * Bit 11-7 : DIEID
+ * Bit 6-4 : FAMID
+ * Bit 3-0 : PINID
+ *
+ * The newer Kinetis series uses the following SDID layout :
+ * Bit 31-28 : FAMID
+ * Bit 27-24 : SUBFAMID
+ * Bit 23-20 : SERIESID
+ * Bit 19-16 : SRAMSIZE
+ * Bit 15-12 : REVID
+ * Bit 6-4 : Reserved (0)
+ * Bit 3-0 : PINID
+ *
+ * We assume that if bits 31-16 are 0 then it's an older
+ * K-series MCU.
+ */
+
+#define KINETIS_SOPT1_RAMSIZE_MASK 0x0000F000
+#define KINETIS_SOPT1_RAMSIZE_K24FN1M 0x0000B000
+
+#define KINETIS_SDID_K_SERIES_MASK 0x0000FFFF
+
+#define KINETIS_SDID_DIEID_MASK 0x00000F80
+
+#define KINETIS_SDID_DIEID_K22FN128 0x00000680 /* smaller pflash with FTFA */
+#define KINETIS_SDID_DIEID_K22FN256 0x00000A80
+#define KINETIS_SDID_DIEID_K22FN512 0x00000E80
+#define KINETIS_SDID_DIEID_K24FN256 0x00000700
+
+#define KINETIS_SDID_DIEID_K24FN1M 0x00000300 /* Detect Errata 7534 */
+
+/* We can't rely solely on the FAMID field to determine the MCU
+ * type since some FAMID values identify multiple MCUs with
+ * different flash sector sizes (K20 and K22 for instance).
+ * Therefore we combine it with the DIEID bits which may possibly
+ * break if Freescale bumps the DIEID for a particular MCU. */
+#define KINETIS_K_SDID_TYPE_MASK 0x00000FF0
+#define KINETIS_K_SDID_K10_M50 0x00000000
+#define KINETIS_K_SDID_K10_M72 0x00000080
+#define KINETIS_K_SDID_K10_M100 0x00000100
+#define KINETIS_K_SDID_K10_M120 0x00000180
+#define KINETIS_K_SDID_K11 0x00000220
+#define KINETIS_K_SDID_K12 0x00000200
+#define KINETIS_K_SDID_K20_M50 0x00000010
+#define KINETIS_K_SDID_K20_M72 0x00000090
+#define KINETIS_K_SDID_K20_M100 0x00000110
+#define KINETIS_K_SDID_K20_M120 0x00000190
+#define KINETIS_K_SDID_K21_M50 0x00000230
+#define KINETIS_K_SDID_K21_M120 0x00000330
+#define KINETIS_K_SDID_K22_M50 0x00000210
+#define KINETIS_K_SDID_K22_M120 0x00000310
+#define KINETIS_K_SDID_K30_M72 0x000000A0
+#define KINETIS_K_SDID_K30_M100 0x00000120
+#define KINETIS_K_SDID_K40_M72 0x000000B0
+#define KINETIS_K_SDID_K40_M100 0x00000130
+#define KINETIS_K_SDID_K50_M72 0x000000E0
+#define KINETIS_K_SDID_K51_M72 0x000000F0
+#define KINETIS_K_SDID_K53 0x00000170
+#define KINETIS_K_SDID_K60_M100 0x00000140
+#define KINETIS_K_SDID_K60_M150 0x000001C0
+#define KINETIS_K_SDID_K70_M150 0x000001D0
+
+#define KINETIS_SDID_SERIESID_MASK 0x00F00000
+#define KINETIS_SDID_SERIESID_K 0x00000000
+#define KINETIS_SDID_SERIESID_KL 0x00100000
+#define KINETIS_SDID_SERIESID_KW 0x00500000
+#define KINETIS_SDID_SERIESID_KV 0x00600000
+
+#define KINETIS_SDID_SUBFAMID_MASK 0x0F000000
+#define KINETIS_SDID_SUBFAMID_KX0 0x00000000
+#define KINETIS_SDID_SUBFAMID_KX1 0x01000000
+#define KINETIS_SDID_SUBFAMID_KX2 0x02000000
+#define KINETIS_SDID_SUBFAMID_KX3 0x03000000
+#define KINETIS_SDID_SUBFAMID_KX4 0x04000000
+#define KINETIS_SDID_SUBFAMID_KX5 0x05000000
+#define KINETIS_SDID_SUBFAMID_KX6 0x06000000
+
+#define KINETIS_SDID_FAMILYID_MASK 0xF0000000
+#define KINETIS_SDID_FAMILYID_K0X 0x00000000
+#define KINETIS_SDID_FAMILYID_K1X 0x10000000
+#define KINETIS_SDID_FAMILYID_K2X 0x20000000
+#define KINETIS_SDID_FAMILYID_K3X 0x30000000
+#define KINETIS_SDID_FAMILYID_K4X 0x40000000
+#define KINETIS_SDID_FAMILYID_K6X 0x60000000
+#define KINETIS_SDID_FAMILYID_K7X 0x70000000
struct kinetis_flash_bank {
- unsigned granularity;
unsigned bank_ordinal;
uint32_t sector_size;
+ uint32_t max_flash_prog_size;
uint32_t protection_size;
uint32_t sim_sdid;
FC_FLEX_NVM,
FC_FLEX_RAM,
} flash_class;
+
+ enum {
+ FS_PROGRAM_SECTOR = 1,
+ FS_PROGRAM_LONGWORD = 2,
+ FS_PROGRAM_PHRASE = 4, /* Unsupported */
+ } flash_support;
};
+#define MDM_REG_STAT 0x00
+#define MDM_REG_CTRL 0x04
+#define MDM_REG_ID 0xfc
+
+#define MDM_STAT_FMEACK (1<<0)
+#define MDM_STAT_FREADY (1<<1)
+#define MDM_STAT_SYSSEC (1<<2)
+#define MDM_STAT_SYSRES (1<<3)
+#define MDM_STAT_FMEEN (1<<5)
+#define MDM_STAT_BACKDOOREN (1<<6)
+#define MDM_STAT_LPEN (1<<7)
+#define MDM_STAT_VLPEN (1<<8)
+#define MDM_STAT_LLSMODEXIT (1<<9)
+#define MDM_STAT_VLLSXMODEXIT (1<<10)
+#define MDM_STAT_CORE_HALTED (1<<16)
+#define MDM_STAT_CORE_SLEEPDEEP (1<<17)
+#define MDM_STAT_CORESLEEPING (1<<18)
+
+#define MEM_CTRL_FMEIP (1<<0)
+#define MEM_CTRL_DBG_DIS (1<<1)
+#define MEM_CTRL_DBG_REQ (1<<2)
+#define MEM_CTRL_SYS_RES_REQ (1<<3)
+#define MEM_CTRL_CORE_HOLD_RES (1<<4)
+#define MEM_CTRL_VLLSX_DBG_REQ (1<<5)
+#define MEM_CTRL_VLLSX_DBG_ACK (1<<6)
+#define MEM_CTRL_VLLSX_STAT_ACK (1<<7)
+
+#define MDM_ACCESS_TIMEOUT 3000 /* iterations */
+
+static int kinetis_mdm_write_register(struct adiv5_dap *dap, unsigned reg, uint32_t value)
+{
+ int retval;
+ LOG_DEBUG("MDM_REG[0x%02x] <- %08" PRIX32, reg, value);
+
+ retval = dap_queue_ap_write(dap, reg, value);
+ if (retval != ERROR_OK) {
+ LOG_DEBUG("MDM: failed to queue a write request");
+ return retval;
+ }
+
+ retval = dap_run(dap);
+ if (retval != ERROR_OK) {
+ LOG_DEBUG("MDM: dap_run failed");
+ return retval;
+ }
+
+
+ return ERROR_OK;
+}
+
+static int kinetis_mdm_read_register(struct adiv5_dap *dap, unsigned reg, uint32_t *result)
+{
+ int retval;
+ retval = dap_queue_ap_read(dap, reg, result);
+ if (retval != ERROR_OK) {
+ LOG_DEBUG("MDM: failed to queue a read request");
+ return retval;
+ }
+
+ retval = dap_run(dap);
+ if (retval != ERROR_OK) {
+ LOG_DEBUG("MDM: dap_run failed");
+ return retval;
+ }
+
+ LOG_DEBUG("MDM_REG[0x%02x]: %08" PRIX32, reg, *result);
+ return ERROR_OK;
+}
+
+static int kinetis_mdm_poll_register(struct adiv5_dap *dap, unsigned reg, uint32_t mask, uint32_t value)
+{
+ uint32_t val;
+ int retval;
+ int timeout = MDM_ACCESS_TIMEOUT;
+
+ do {
+ retval = kinetis_mdm_read_register(dap, reg, &val);
+ if (retval != ERROR_OK || (val & mask) == value)
+ return retval;
+
+ alive_sleep(1);
+ } while (timeout--);
+
+ LOG_DEBUG("MDM: polling timed out");
+ return ERROR_FAIL;
+}
+
+/*
+ * This function implements the procedure to mass erase the flash via
+ * SWD/JTAG on Kinetis K and L series of devices as it is described in
+ * AN4835 "Production Flash Programming Best Practices for Kinetis K-
+ * and L-series MCUs" Section 4.2.1
+ */
+COMMAND_HANDLER(kinetis_mdm_mass_erase)
+{
+ struct target *target = get_current_target(CMD_CTX);
+ struct cortex_m_common *cortex_m = target_to_cm(target);
+ struct adiv5_dap *dap = cortex_m->armv7m.arm.dap;
+
+ if (!dap) {
+ LOG_ERROR("Cannot perform mass erase with a high-level adapter");
+ return ERROR_FAIL;
+ }
+
+ int retval;
+ const uint8_t original_ap = dap->ap_current;
+
+ /*
+ * ... Power on the processor, or if power has already been
+ * applied, assert the RESET pin to reset the processor. For
+ * devices that do not have a RESET pin, write the System
+ * Reset Request bit in the MDM-AP control register after
+ * establishing communication...
+ */
+
+ /* assert SRST */
+ if (jtag_get_reset_config() & RESET_HAS_SRST)
+ adapter_assert_reset();
+ else
+ LOG_WARNING("Attempting mass erase without hardware reset. This is not reliable; "
+ "it's recommended you connect SRST and use ``reset_config srst_only''.");
+
+ dap_ap_select(dap, 1);
+
+ retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, MEM_CTRL_SYS_RES_REQ);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /*
+ * ... Read the MDM-AP status register until the Flash Ready bit sets...
+ */
+ retval = kinetis_mdm_poll_register(dap, MDM_REG_STAT,
+ MDM_STAT_FREADY | MDM_STAT_SYSRES,
+ MDM_STAT_FREADY);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM : flash ready timeout");
+ return retval;
+ }
+
+ /*
+ * ... Write the MDM-AP control register to set the Flash Mass
+ * Erase in Progress bit. This will start the mass erase
+ * process...
+ */
+ retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL,
+ MEM_CTRL_SYS_RES_REQ | MEM_CTRL_FMEIP);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* As a sanity check make sure that device started mass erase procedure */
+ retval = kinetis_mdm_poll_register(dap, MDM_REG_STAT,
+ MDM_STAT_FMEACK, MDM_STAT_FMEACK);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /*
+ * ... Read the MDM-AP control register until the Flash Mass
+ * Erase in Progress bit clears...
+ */
+ retval = kinetis_mdm_poll_register(dap, MDM_REG_CTRL,
+ MEM_CTRL_FMEIP,
+ 0);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /*
+ * ... Negate the RESET signal or clear the System Reset Request
+ * bit in the MDM-AP control register...
+ */
+ retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, 0);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (jtag_get_reset_config() & RESET_HAS_SRST)
+ adapter_deassert_reset();
+
+ dap_ap_select(dap, original_ap);
+ return ERROR_OK;
+}
+
+static const uint32_t kinetis_known_mdm_ids[] = {
+ 0x001C0000, /* Kinetis-K Series */
+ 0x001C0020, /* Kinetis-L/M/V/E Series */
+};
+
+/*
+ * This function implements the procedure to connect to
+ * SWD/JTAG on Kinetis K and L series of devices as it is described in
+ * AN4835 "Production Flash Programming Best Practices for Kinetis K-
+ * and L-series MCUs" Section 4.1.1
+ */
+COMMAND_HANDLER(kinetis_check_flash_security_status)
+{
+ struct target *target = get_current_target(CMD_CTX);
+ struct cortex_m_common *cortex_m = target_to_cm(target);
+ struct adiv5_dap *dap = cortex_m->armv7m.arm.dap;
+
+ if (!dap) {
+ LOG_WARNING("Cannot check flash security status with a high-level adapter");
+ return ERROR_OK;
+ }
+
+ uint32_t val;
+ int retval;
+ const uint8_t origninal_ap = dap->ap_current;
+
+ dap_ap_select(dap, 1);
+
+
+ /*
+ * ... The MDM-AP ID register can be read to verify that the
+ * connection is working correctly...
+ */
+ retval = kinetis_mdm_read_register(dap, MDM_REG_ID, &val);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM: failed to read ID register");
+ goto fail;
+ }
+
+ bool found = false;
+ for (size_t i = 0; i < ARRAY_SIZE(kinetis_known_mdm_ids); i++) {
+ if (val == kinetis_known_mdm_ids[i]) {
+ found = true;
+ break;
+ }
+ }
+
+ if (!found)
+ LOG_WARNING("MDM: unknown ID %08" PRIX32, val);
+
+ /*
+ * ... Read the MDM-AP status register until the Flash Ready bit sets...
+ */
+ retval = kinetis_mdm_poll_register(dap, MDM_REG_STAT,
+ MDM_STAT_FREADY,
+ MDM_STAT_FREADY);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM: flash ready timeout");
+ goto fail;
+ }
+
+ /*
+ * ... Read the System Security bit to determine if security is enabled.
+ * If System Security = 0, then proceed. If System Security = 1, then
+ * communication with the internals of the processor, including the
+ * flash, will not be possible without issuing a mass erase command or
+ * unsecuring the part through other means (backdoor key unlock)...
+ */
+ retval = kinetis_mdm_read_register(dap, MDM_REG_STAT, &val);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("MDM: failed to read MDM_REG_STAT");
+ goto fail;
+ }
+
+ if (val & MDM_STAT_SYSSEC) {
+ jtag_poll_set_enabled(false);
+
+ LOG_WARNING("*********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! **********");
+ LOG_WARNING("**** ****");
+ LOG_WARNING("**** Your Kinetis MCU is in secured state, which means that, ****");
+ LOG_WARNING("**** with exception for very basic communication, JTAG/SWD ****");
+ LOG_WARNING("**** interface will NOT work. In order to restore its ****");
+ LOG_WARNING("**** functionality please issue 'kinetis mdm mass_erase' ****");
+ LOG_WARNING("**** command, power cycle the MCU and restart OpenOCD. ****");
+ LOG_WARNING("**** ****");
+ LOG_WARNING("*********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! **********");
+ } else {
+ LOG_INFO("MDM: Chip is unsecured. Continuing.");
+ jtag_poll_set_enabled(true);
+ }
+
+ dap_ap_select(dap, origninal_ap);
+
+ return ERROR_OK;
+
+fail:
+ LOG_ERROR("MDM: Failed to check security status of the MCU. Cannot proceed further");
+ jtag_poll_set_enabled(false);
+ return retval;
+}
+
FLASH_BANK_COMMAND_HANDLER(kinetis_flash_bank_command)
{
struct kinetis_flash_bank *bank_info;
return ERROR_OK;
}
-static int kinetis_protect(struct flash_bank *bank, int set, int first,
- int last)
+/* Kinetis Program-LongWord Microcodes */
+static const uint8_t kinetis_flash_write_code[] = {
+ /* Params:
+ * r0 - workarea buffer
+ * r1 - target address
+ * r2 - wordcount
+ * Clobbered:
+ * r4 - tmp
+ * r5 - tmp
+ * r6 - tmp
+ * r7 - tmp
+ */
+
+ /* .L1: */
+ /* for(register uint32_t i=0;i<wcount;i++){ */
+ 0x04, 0x1C, /* mov r4, r0 */
+ 0x00, 0x23, /* mov r3, #0 */
+ /* .L2: */
+ 0x0E, 0x1A, /* sub r6, r1, r0 */
+ 0xA6, 0x19, /* add r6, r4, r6 */
+ 0x93, 0x42, /* cmp r3, r2 */
+ 0x16, 0xD0, /* beq .L9 */
+ /* .L5: */
+ /* while((FTFx_FSTAT&FTFA_FSTAT_CCIF_MASK) != FTFA_FSTAT_CCIF_MASK){}; */
+ 0x0B, 0x4D, /* ldr r5, .L10 */
+ 0x2F, 0x78, /* ldrb r7, [r5] */
+ 0x7F, 0xB2, /* sxtb r7, r7 */
+ 0x00, 0x2F, /* cmp r7, #0 */
+ 0xFA, 0xDA, /* bge .L5 */
+ /* FTFx_FSTAT = FTFA_FSTAT_ACCERR_MASK|FTFA_FSTAT_FPVIOL_MASK|FTFA_FSTAT_RDCO */
+ 0x70, 0x27, /* mov r7, #112 */
+ 0x2F, 0x70, /* strb r7, [r5] */
+ /* FTFx_FCCOB3 = faddr; */
+ 0x09, 0x4F, /* ldr r7, .L10+4 */
+ 0x3E, 0x60, /* str r6, [r7] */
+ 0x06, 0x27, /* mov r7, #6 */
+ /* FTFx_FCCOB0 = 0x06; */
+ 0x08, 0x4E, /* ldr r6, .L10+8 */
+ 0x37, 0x70, /* strb r7, [r6] */
+ /* FTFx_FCCOB7 = *pLW; */
+ 0x80, 0xCC, /* ldmia r4!, {r7} */
+ 0x08, 0x4E, /* ldr r6, .L10+12 */
+ 0x37, 0x60, /* str r7, [r6] */
+ /* FTFx_FSTAT = FTFA_FSTAT_CCIF_MASK; */
+ 0x80, 0x27, /* mov r7, #128 */
+ 0x2F, 0x70, /* strb r7, [r5] */
+ /* .L4: */
+ /* while((FTFx_FSTAT&FTFA_FSTAT_CCIF_MASK) != FTFA_FSTAT_CCIF_MASK){}; */
+ 0x2E, 0x78, /* ldrb r6, [r5] */
+ 0x77, 0xB2, /* sxtb r7, r6 */
+ 0x00, 0x2F, /* cmp r7, #0 */
+ 0xFB, 0xDA, /* bge .L4 */
+ 0x01, 0x33, /* add r3, r3, #1 */
+ 0xE4, 0xE7, /* b .L2 */
+ /* .L9: */
+ 0x00, 0xBE, /* bkpt #0 */
+ /* .L10: */
+ 0x00, 0x00, 0x02, 0x40, /* .word 1073872896 */
+ 0x04, 0x00, 0x02, 0x40, /* .word 1073872900 */
+ 0x07, 0x00, 0x02, 0x40, /* .word 1073872903 */
+ 0x08, 0x00, 0x02, 0x40, /* .word 1073872904 */
+};
+
+/* Program LongWord Block Write */
+static int kinetis_write_block(struct flash_bank *bank, const uint8_t *buffer,
+ uint32_t offset, uint32_t wcount)
+{
+ struct target *target = bank->target;
+ uint32_t buffer_size = 2048; /* Default minimum value */
+ struct working_area *write_algorithm;
+ struct working_area *source;
+ uint32_t address = bank->base + offset;
+ struct reg_param reg_params[3];
+ struct armv7m_algorithm armv7m_info;
+ int retval = ERROR_OK;
+
+ /* Params:
+ * r0 - workarea buffer
+ * r1 - target address
+ * r2 - wordcount
+ * Clobbered:
+ * r4 - tmp
+ * r5 - tmp
+ * r6 - tmp
+ * r7 - tmp
+ */
+
+ /* Increase buffer_size if needed */
+ if (buffer_size < (target->working_area_size/2))
+ buffer_size = (target->working_area_size/2);
+
+ LOG_INFO("Kinetis: FLASH Write ...");
+
+ /* check code alignment */
+ if (offset & 0x1) {
+ LOG_WARNING("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset);
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
+
+ /* allocate working area with flash programming code */
+ if (target_alloc_working_area(target, sizeof(kinetis_flash_write_code),
+ &write_algorithm) != ERROR_OK) {
+ LOG_WARNING("no working area available, can't do block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+
+ retval = target_write_buffer(target, write_algorithm->address,
+ sizeof(kinetis_flash_write_code), kinetis_flash_write_code);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* memory buffer */
+ while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK) {
+ buffer_size /= 4;
+ if (buffer_size <= 256) {
+ /* free working area, write algorithm already allocated */
+ target_free_working_area(target, write_algorithm);
+
+ LOG_WARNING("No large enough working area available, can't do block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+ }
+
+ armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
+ armv7m_info.core_mode = ARM_MODE_THREAD;
+
+ init_reg_param(®_params[0], "r0", 32, PARAM_OUT); /* *pLW (*buffer) */
+ init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* faddr */
+ init_reg_param(®_params[2], "r2", 32, PARAM_OUT); /* number of words to program */
+
+ /* write code buffer and use Flash programming code within kinetis */
+ /* Set breakpoint to 0 with time-out of 1000 ms */
+ while (wcount > 0) {
+ uint32_t thisrun_count = (wcount > (buffer_size / 4)) ? (buffer_size / 4) : wcount;
+
+ retval = target_write_buffer(target, source->address, thisrun_count * 4, buffer);
+ if (retval != ERROR_OK)
+ break;
+
+ buf_set_u32(reg_params[0].value, 0, 32, source->address);
+ buf_set_u32(reg_params[1].value, 0, 32, address);
+ buf_set_u32(reg_params[2].value, 0, 32, thisrun_count);
+
+ retval = target_run_algorithm(target, 0, NULL, 3, reg_params,
+ write_algorithm->address, 0, 100000, &armv7m_info);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Error executing kinetis Flash programming algorithm");
+ retval = ERROR_FLASH_OPERATION_FAILED;
+ break;
+ }
+
+ buffer += thisrun_count * 4;
+ address += thisrun_count * 4;
+ wcount -= thisrun_count;
+ }
+
+ target_free_working_area(target, source);
+ target_free_working_area(target, write_algorithm);
+
+ destroy_reg_param(®_params[0]);
+ destroy_reg_param(®_params[1]);
+ destroy_reg_param(®_params[2]);
+
+ return retval;
+}
+
+static int kinetis_protect(struct flash_bank *bank, int set, int first, int last)
{
LOG_WARNING("kinetis_protect not supported yet");
/* FIXME: TODO */
uint8_t *ftfx_fstat)
{
uint8_t command[12] = {faddr & 0xff, (faddr >> 8) & 0xff, (faddr >> 16) & 0xff, fcmd,
- fccob7, fccob6, fccob5, fccob4,
- fccobb, fccoba, fccob9, fccob8};
+ fccob7, fccob6, fccob5, fccob4,
+ fccobb, fccoba, fccob9, fccob8};
int result, i;
uint8_t buffer;
return result;
/* wait for done */
- for (i = 0; i < 50; i++) {
+ for (i = 0; i < 240; i++) { /* Need longtime for "Mass Erase" Command Nemui Changed */
result =
target_read_memory(bank->target, FTFx_FSTAT, 1, 1, ftfx_fstat);
LOG_ERROR
("ftfx command failed FSTAT: %02X FCCOB: %02X%02X%02X%02X %02X%02X%02X%02X %02X%02X%02X%02X",
*ftfx_fstat, command[3], command[2], command[1], command[0],
- command[7], command[6], command[5], command[4],
- command[11], command[10], command[9], command[8]);
+ command[7], command[6], command[5], command[4],
+ command[11], command[10], command[9], command[8]);
return ERROR_FLASH_OPERATION_FAILED;
}
return ERROR_OK;
}
+COMMAND_HANDLER(kinetis_securing_test)
+{
+ int result;
+ uint8_t ftfx_fstat;
+ struct target *target = get_current_target(CMD_CTX);
+ struct flash_bank *bank = NULL;
+
+ result = get_flash_bank_by_addr(target, 0x00000000, true, &bank);
+ if (result != ERROR_OK)
+ return result;
+
+ assert(bank != NULL);
+
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ return kinetis_ftfx_command(bank, FTFx_CMD_SECTERASE, bank->base + 0x00000400,
+ 0, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat);
+}
+
static int kinetis_erase(struct flash_bank *bank, int first, int last)
{
int result, i;
uint8_t ftfx_fstat;
/* set command and sector address */
result = kinetis_ftfx_command(bank, FTFx_CMD_SECTERASE, bank->base + bank->sectors[i].offset,
- 0, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat);
+ 0, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat);
if (result != ERROR_OK) {
LOG_WARNING("erase sector %d failed", i);
return ERROR_OK;
}
-static int kinetis_write(struct flash_bank *bank, uint8_t *buffer,
+static int kinetis_write(struct flash_bank *bank, const uint8_t *buffer,
uint32_t offset, uint32_t count)
{
unsigned int i, result, fallback = 0;
uint8_t buf[8];
uint32_t wc;
struct kinetis_flash_bank *kinfo = bank->driver_priv;
+ uint8_t *new_buffer = NULL;
if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- if (kinfo->flash_class == FC_FLEX_NVM) {
+ if (!(kinfo->flash_support & FS_PROGRAM_SECTOR)) {
+ /* fallback to longword write */
+ fallback = 1;
+ LOG_WARNING("This device supports Program Longword execution only.");
+ LOG_DEBUG("flash write into PFLASH @08%" PRIX32, offset);
+
+ } else if (kinfo->flash_class == FC_FLEX_NVM) {
uint8_t ftfx_fstat;
- LOG_DEBUG("flash write into FlexNVM @%08X", offset);
+ LOG_DEBUG("flash write into FlexNVM @%08" PRIX32, offset);
/* make flex ram available */
result = kinetis_ftfx_command(bank, FTFx_CMD_SETFLEXRAM, 0x00ff0000, 0, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat);
/* fallback to longword write */
fallback = 1;
- LOG_WARNING("ram not ready, fallback to slow longword write (FCNFG: %02X)",
- buf[0]);
+ LOG_WARNING("ram not ready, fallback to slow longword write (FCNFG: %02X)", buf[0]);
}
} else {
- LOG_DEBUG("flash write into PFLASH @08%X", offset);
+ LOG_DEBUG("flash write into PFLASH @08%" PRIX32, offset);
}
/* program section command */
if (fallback == 0) {
- unsigned prog_section_bytes = kinfo->sector_size >> 8;
- for (i = 0; i < count; i += kinfo->sector_size) {
- /*
- * The largest possible Kinetis "section" is
- * 16 bytes. A full Kinetis sector is always
- * 256 "section"s.
- */
+ /*
+ * Kinetis uses different terms for the granularity of
+ * sector writes, e.g. "phrase" or "128 bits". We use
+ * the generic term "chunk". The largest possible
+ * Kinetis "chunk" is 16 bytes (128 bits).
+ */
+ unsigned prog_section_chunk_bytes = kinfo->sector_size >> 8;
+ unsigned prog_size_bytes = kinfo->max_flash_prog_size;
+ for (i = 0; i < count; i += prog_size_bytes) {
uint8_t residual_buffer[16];
uint8_t ftfx_fstat;
- uint32_t section_count = 256;
+ uint32_t section_count = prog_size_bytes / prog_section_chunk_bytes;
uint32_t residual_wc = 0;
/*
* Assume the word count covers an entire
* sector.
*/
- wc = kinfo->sector_size / 4;
+ wc = prog_size_bytes / 4;
/*
* If bytes to be programmed are less than the
* residual buffer so that a full "section"
* may always be programmed.
*/
- if ((count - i) < kinfo->sector_size) {
+ if ((count - i) < prog_size_bytes) {
/* number of bytes to program beyond full section */
- unsigned residual_bc = (count-i) % prog_section_bytes;
+ unsigned residual_bc = (count-i) % prog_section_chunk_bytes;
/* number of complete words to copy directly from buffer */
wc = (count - i) / 4;
/* number of total sections to write, including residual */
- section_count = DIV_ROUND_UP((count-i), prog_section_bytes);
+ section_count = DIV_ROUND_UP((count-i), prog_section_chunk_bytes);
/* any residual bytes delivers a whole residual section */
- residual_wc = (residual_bc ? prog_section_bytes : 0)/4;
+ residual_wc = (residual_bc ? prog_section_chunk_bytes : 0)/4;
/* clear residual buffer then populate residual bytes */
- (void) memset(residual_buffer, 0xff, prog_section_bytes);
+ (void) memset(residual_buffer, 0xff, prog_section_chunk_bytes);
(void) memcpy(residual_buffer, &buffer[i+4*wc], residual_bc);
}
- LOG_DEBUG("write section @ %08X with length %d bytes",
- offset + i, wc*4);
+ LOG_DEBUG("write section @ %08" PRIX32 " with length %" PRIu32 " bytes",
+ offset + i, (uint32_t)wc*4);
/* write data to flexram as whole-words */
result = target_write_memory(bank->target, FLEXRAM, 4, wc,
- buffer + i);
+ buffer + i);
if (result != ERROR_OK) {
LOG_ERROR("target_write_memory failed");
/* write the residual words to the flexram */
if (residual_wc) {
result = target_write_memory(bank->target,
- FLEXRAM+4*wc,
- 4, residual_wc,
- residual_buffer);
+ FLEXRAM+4*wc,
+ 4, residual_wc,
+ residual_buffer);
if (result != ERROR_OK) {
LOG_ERROR("target_write_memory failed");
/* execute section-write command */
result = kinetis_ftfx_command(bank, FTFx_CMD_SECTWRITE, bank->base + offset + i,
- section_count>>8, section_count, 0, 0,
- 0, 0, 0, 0, &ftfx_fstat);
+ section_count>>8, section_count, 0, 0,
+ 0, 0, 0, 0, &ftfx_fstat);
if (result != ERROR_OK)
return ERROR_FLASH_OPERATION_FAILED;
}
}
/* program longword command, not supported in "SF3" devices */
- else if (kinfo->granularity != 3) {
- for (i = 0; i < count; i += 4) {
- uint8_t ftfx_fstat;
+ else if (kinfo->flash_support & FS_PROGRAM_LONGWORD) {
+ if (count & 0x3) {
+ uint32_t old_count = count;
+ count = (old_count | 3) + 1;
+ new_buffer = malloc(count);
+ if (new_buffer == NULL) {
+ LOG_ERROR("odd number of bytes to write and no memory "
+ "for padding buffer");
+ return ERROR_FAIL;
+ }
+ LOG_INFO("odd number of bytes to write (%" PRIu32 "), extending to %" PRIu32 " "
+ "and padding with 0xff", old_count, count);
+ memset(new_buffer, 0xff, count);
+ buffer = memcpy(new_buffer, buffer, old_count);
+ }
- LOG_DEBUG("write longword @ %08X", offset + i);
+ uint32_t words_remaining = count / 4;
- uint8_t padding[4] = {0xff, 0xff, 0xff, 0xff};
- memcpy(padding, buffer + i, MIN(4, count-i));
- result = kinetis_ftfx_command(bank, FTFx_CMD_LWORDPROG, bank->base + offset + i,
- padding[3], padding[2], padding[1], padding[0],
- 0, 0, 0, 0, &ftfx_fstat);
+ /* try using a block write */
+ int retval = kinetis_write_block(bank, buffer, offset, words_remaining);
- if (result != ERROR_OK)
- return ERROR_FLASH_OPERATION_FAILED;
+ if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
+ /* if block write failed (no sufficient working area),
+ * we use normal (slow) single word accesses */
+ LOG_WARNING("couldn't use block writes, falling back to single "
+ "memory accesses");
+
+ for (i = 0; i < count; i += 4) {
+ uint8_t ftfx_fstat;
+
+ LOG_DEBUG("write longword @ %08" PRIX32, (uint32_t)(offset + i));
+
+ uint8_t padding[4] = {0xff, 0xff, 0xff, 0xff};
+ memcpy(padding, buffer + i, MIN(4, count-i));
+
+ result = kinetis_ftfx_command(bank, FTFx_CMD_LWORDPROG, bank->base + offset + i,
+ padding[3], padding[2], padding[1], padding[0],
+ 0, 0, 0, 0, &ftfx_fstat);
+
+ if (result != ERROR_OK)
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
}
} else {
LOG_ERROR("Flash write strategy not implemented");
static int kinetis_read_part_info(struct flash_bank *bank)
{
int result, i;
- uint8_t buf[4];
uint32_t offset = 0;
uint8_t fcfg1_nvmsize, fcfg1_pfsize, fcfg1_eesize, fcfg2_pflsh;
uint32_t nvm_size = 0, pf_size = 0, ee_size = 0;
- unsigned granularity, num_blocks = 0, num_pflash_blocks = 0, num_nvm_blocks = 0,
- first_nvm_bank = 0, reassign = 0;
+ unsigned num_blocks = 0, num_pflash_blocks = 0, num_nvm_blocks = 0, first_nvm_bank = 0,
+ reassign = 0, pflash_sector_size_bytes = 0, nvm_sector_size_bytes = 0;
+ struct target *target = bank->target;
struct kinetis_flash_bank *kinfo = bank->driver_priv;
- result = target_read_memory(bank->target, SIM_SDID, 1, 4, buf);
+ result = target_read_u32(target, SIM_SDID, &kinfo->sim_sdid);
if (result != ERROR_OK)
return result;
- kinfo->sim_sdid = target_buffer_get_u32(bank->target, buf);
- granularity = (kinfo->sim_sdid >> 7) & 0x03;
- result = target_read_memory(bank->target, SIM_FCFG1, 1, 4, buf);
+ if ((kinfo->sim_sdid & (~KINETIS_SDID_K_SERIES_MASK)) == 0) {
+ /* older K-series MCU */
+ uint32_t mcu_type = kinfo->sim_sdid & KINETIS_K_SDID_TYPE_MASK;
+
+ switch (mcu_type) {
+ case KINETIS_K_SDID_K10_M50:
+ case KINETIS_K_SDID_K20_M50:
+ /* 1kB sectors */
+ pflash_sector_size_bytes = 1<<10;
+ nvm_sector_size_bytes = 1<<10;
+ num_blocks = 2;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_PROGRAM_SECTOR;
+ break;
+ case KINETIS_K_SDID_K10_M72:
+ case KINETIS_K_SDID_K20_M72:
+ case KINETIS_K_SDID_K30_M72:
+ case KINETIS_K_SDID_K30_M100:
+ case KINETIS_K_SDID_K40_M72:
+ case KINETIS_K_SDID_K40_M100:
+ case KINETIS_K_SDID_K50_M72:
+ /* 2kB sectors, 1kB FlexNVM sectors */
+ pflash_sector_size_bytes = 2<<10;
+ nvm_sector_size_bytes = 1<<10;
+ num_blocks = 2;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_PROGRAM_SECTOR;
+ kinfo->max_flash_prog_size = 1<<10;
+ break;
+ case KINETIS_K_SDID_K10_M100:
+ case KINETIS_K_SDID_K20_M100:
+ case KINETIS_K_SDID_K11:
+ case KINETIS_K_SDID_K12:
+ case KINETIS_K_SDID_K21_M50:
+ case KINETIS_K_SDID_K22_M50:
+ case KINETIS_K_SDID_K51_M72:
+ case KINETIS_K_SDID_K53:
+ case KINETIS_K_SDID_K60_M100:
+ /* 2kB sectors */
+ pflash_sector_size_bytes = 2<<10;
+ nvm_sector_size_bytes = 2<<10;
+ num_blocks = 2;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_PROGRAM_SECTOR;
+ break;
+ case KINETIS_K_SDID_K21_M120:
+ case KINETIS_K_SDID_K22_M120:
+ /* 4kB sectors (MK21FN1M0, MK21FX512, MK22FN1M0, MK22FX512) */
+ pflash_sector_size_bytes = 4<<10;
+ kinfo->max_flash_prog_size = 1<<10;
+ nvm_sector_size_bytes = 4<<10;
+ num_blocks = 2;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
+ break;
+ case KINETIS_K_SDID_K10_M120:
+ case KINETIS_K_SDID_K20_M120:
+ case KINETIS_K_SDID_K60_M150:
+ case KINETIS_K_SDID_K70_M150:
+ /* 4kB sectors */
+ pflash_sector_size_bytes = 4<<10;
+ nvm_sector_size_bytes = 4<<10;
+ num_blocks = 4;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
+ break;
+ default:
+ LOG_ERROR("Unsupported K-family FAMID");
+ }
+ } else {
+ /* Newer K-series or KL series MCU */
+ switch (kinfo->sim_sdid & KINETIS_SDID_SERIESID_MASK) {
+ case KINETIS_SDID_SERIESID_K:
+ switch (kinfo->sim_sdid & (KINETIS_SDID_FAMILYID_MASK | KINETIS_SDID_SUBFAMID_MASK)) {
+ case KINETIS_SDID_FAMILYID_K0X | KINETIS_SDID_SUBFAMID_KX2:
+ /* K02FN64, K02FN128: FTFA, 2kB sectors */
+ pflash_sector_size_bytes = 2<<10;
+ num_blocks = 1;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD;
+ break;
+
+ case KINETIS_SDID_FAMILYID_K2X | KINETIS_SDID_SUBFAMID_KX2: {
+ /* MK24FN1M reports as K22, this should detect it (according to errata note 1N83J) */
+ uint32_t sopt1;
+ result = target_read_u32(target, SIM_SOPT1, &sopt1);
+ if (result != ERROR_OK)
+ return result;
+
+ if (((kinfo->sim_sdid & (KINETIS_SDID_DIEID_MASK)) == KINETIS_SDID_DIEID_K24FN1M) &&
+ ((sopt1 & KINETIS_SOPT1_RAMSIZE_MASK) == KINETIS_SOPT1_RAMSIZE_K24FN1M)) {
+ /* MK24FN1M */
+ pflash_sector_size_bytes = 4<<10;
+ num_blocks = 2;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
+ kinfo->max_flash_prog_size = 1<<10;
+ break;
+ }
+ if ((kinfo->sim_sdid & (KINETIS_SDID_DIEID_MASK)) == KINETIS_SDID_DIEID_K22FN128
+ || (kinfo->sim_sdid & (KINETIS_SDID_DIEID_MASK)) == KINETIS_SDID_DIEID_K22FN256
+ || (kinfo->sim_sdid & (KINETIS_SDID_DIEID_MASK)) == KINETIS_SDID_DIEID_K22FN512) {
+ /* K22 with new-style SDID - smaller pflash with FTFA, 2kB sectors */
+ pflash_sector_size_bytes = 2<<10;
+ num_blocks = 2; /* 1 or 2 blocks */
+ kinfo->flash_support = FS_PROGRAM_LONGWORD;
+ break;
+ }
+ LOG_ERROR("Unsupported Kinetis K22 DIEID");
+ break;
+ }
+ case KINETIS_SDID_FAMILYID_K2X | KINETIS_SDID_SUBFAMID_KX4:
+ pflash_sector_size_bytes = 4<<10;
+ if ((kinfo->sim_sdid & (KINETIS_SDID_DIEID_MASK)) == KINETIS_SDID_DIEID_K24FN256) {
+ /* K24FN256 - smaller pflash with FTFA */
+ num_blocks = 1;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD;
+ break;
+ }
+ /* K24FN1M without errata 7534 */
+ num_blocks = 2;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
+ kinfo->max_flash_prog_size = 1<<10;
+ break;
+
+ case KINETIS_SDID_FAMILYID_K6X | KINETIS_SDID_SUBFAMID_KX3:
+ case KINETIS_SDID_FAMILYID_K6X | KINETIS_SDID_SUBFAMID_KX1: /* errata 7534 - should be K63 */
+ /* K63FN1M0 */
+ case KINETIS_SDID_FAMILYID_K6X | KINETIS_SDID_SUBFAMID_KX4:
+ case KINETIS_SDID_FAMILYID_K6X | KINETIS_SDID_SUBFAMID_KX2: /* errata 7534 - should be K64 */
+ /* K64FN1M0, K64FX512 */
+ pflash_sector_size_bytes = 4<<10;
+ nvm_sector_size_bytes = 4<<10;
+ kinfo->max_flash_prog_size = 1<<10;
+ num_blocks = 2;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
+ break;
+
+ case KINETIS_SDID_FAMILYID_K2X | KINETIS_SDID_SUBFAMID_KX6:
+ /* K26FN2M0 */
+ case KINETIS_SDID_FAMILYID_K6X | KINETIS_SDID_SUBFAMID_KX6:
+ /* K66FN2M0, K66FX1M0 */
+ pflash_sector_size_bytes = 4<<10;
+ nvm_sector_size_bytes = 4<<10;
+ kinfo->max_flash_prog_size = 1<<10;
+ num_blocks = 4;
+ kinfo->flash_support = FS_PROGRAM_PHRASE | FS_PROGRAM_SECTOR;
+ break;
+ default:
+ LOG_ERROR("Unsupported Kinetis FAMILYID SUBFAMID");
+ }
+ break;
+ case KINETIS_SDID_SERIESID_KL:
+ /* KL-series */
+ pflash_sector_size_bytes = 1<<10;
+ nvm_sector_size_bytes = 1<<10;
+ num_blocks = 1;
+ kinfo->flash_support = FS_PROGRAM_LONGWORD;
+ break;
+ default:
+ LOG_ERROR("Unsupported K-series");
+ }
+ }
+
+ if (pflash_sector_size_bytes == 0) {
+ LOG_ERROR("MCU is unsupported, SDID 0x%08" PRIx32, kinfo->sim_sdid);
+ return ERROR_FLASH_OPER_UNSUPPORTED;
+ }
+
+ result = target_read_u32(target, SIM_FCFG1, &kinfo->sim_fcfg1);
if (result != ERROR_OK)
return result;
- kinfo->sim_fcfg1 = target_buffer_get_u32(bank->target, buf);
- result = target_read_memory(bank->target, SIM_FCFG2, 1, 4, buf);
+ result = target_read_u32(target, SIM_FCFG2, &kinfo->sim_fcfg2);
if (result != ERROR_OK)
return result;
- kinfo->sim_fcfg2 = target_buffer_get_u32(bank->target, buf);
fcfg2_pflsh = (kinfo->sim_fcfg2 >> 23) & 0x01;
- LOG_DEBUG("SDID: %08X FCFG1: %08X FCFG2: %08X", kinfo->sim_sdid,
- kinfo->sim_fcfg1, kinfo->sim_fcfg2);
+ LOG_DEBUG("SDID: 0x%08" PRIX32 " FCFG1: 0x%08" PRIX32 " FCFG2: 0x%08" PRIX32, kinfo->sim_sdid,
+ kinfo->sim_fcfg1, kinfo->sim_fcfg2);
fcfg1_nvmsize = (uint8_t)((kinfo->sim_fcfg1 >> 28) & 0x0f);
fcfg1_pfsize = (uint8_t)((kinfo->sim_fcfg1 >> 24) & 0x0f);
nvm_size = 1 << (14 + (fcfg1_nvmsize >> 1));
break;
case 0x0f:
- if (granularity == 3)
+ if (pflash_sector_size_bytes >= 4<<10)
nvm_size = 512<<10;
else
+ /* K20_100 */
nvm_size = 256<<10;
break;
default:
pf_size = 1 << (14 + (fcfg1_pfsize >> 1));
break;
case 0x0f:
- if (granularity == 3)
+ if (pflash_sector_size_bytes >= 4<<10)
pf_size = 1024<<10;
else if (fcfg2_pflsh)
pf_size = 512<<10;
break;
}
- LOG_DEBUG("FlexNVM: %d PFlash: %d FlexRAM: %d PFLSH: %d",
+ LOG_DEBUG("FlexNVM: %" PRIu32 " PFlash: %" PRIu32 " FlexRAM: %" PRIu32 " PFLSH: %d",
nvm_size, pf_size, ee_size, fcfg2_pflsh);
- num_blocks = kinetis_flash_params[granularity].num_blocks;
num_pflash_blocks = num_blocks / (2 - fcfg2_pflsh);
first_nvm_bank = num_pflash_blocks;
num_nvm_blocks = num_blocks - num_pflash_blocks;
LOG_DEBUG("%d blocks total: %d PFlash, %d FlexNVM",
- num_blocks, num_pflash_blocks, num_nvm_blocks);
+ num_blocks, num_pflash_blocks, num_nvm_blocks);
/*
* If the flash class is already assigned, verify the
if (kinfo->bank_ordinal != (unsigned) bank->bank_number) {
LOG_WARNING("Flash ordinal/bank number mismatch");
reassign = 1;
- } else if (kinfo->granularity != granularity) {
- LOG_WARNING("Flash granularity mismatch");
- reassign = 1;
} else {
switch (kinfo->flash_class) {
case FC_PFLASH:
if (kinfo->bank_ordinal >= first_nvm_bank) {
- LOG_WARNING("Class mismatch, bank %d is not PFlash",
- bank->bank_number);
+ LOG_WARNING("Class mismatch, bank %d is not PFlash", bank->bank_number);
reassign = 1;
} else if (bank->size != (pf_size / num_pflash_blocks)) {
LOG_WARNING("PFlash size mismatch");
(0x00000000 + bank->size * kinfo->bank_ordinal)) {
LOG_WARNING("PFlash address range mismatch");
reassign = 1;
- } else if (kinfo->sector_size !=
- kinetis_flash_params[granularity].pflash_sector_size_bytes) {
+ } else if (kinfo->sector_size != pflash_sector_size_bytes) {
LOG_WARNING("PFlash sector size mismatch");
reassign = 1;
} else {
break;
case FC_FLEX_NVM:
if ((kinfo->bank_ordinal >= num_blocks) ||
- (kinfo->bank_ordinal < first_nvm_bank)) {
- LOG_WARNING("Class mismatch, bank %d is not FlexNVM",
- bank->bank_number);
+ (kinfo->bank_ordinal < first_nvm_bank)) {
+ LOG_WARNING("Class mismatch, bank %d is not FlexNVM", bank->bank_number);
reassign = 1;
} else if (bank->size != (nvm_size / num_nvm_blocks)) {
LOG_WARNING("FlexNVM size mismatch");
reassign = 1;
} else if (bank->base !=
- (0x10000000 + bank->size * kinfo->bank_ordinal)) {
+ (0x10000000 + bank->size * kinfo->bank_ordinal)) {
LOG_WARNING("FlexNVM address range mismatch");
reassign = 1;
- } else if (kinfo->sector_size !=
- kinetis_flash_params[granularity].nvm_sector_size_bytes) {
+ } else if (kinfo->sector_size != nvm_sector_size_bytes) {
LOG_WARNING("FlexNVM sector size mismatch");
reassign = 1;
} else {
break;
case FC_FLEX_RAM:
if (kinfo->bank_ordinal != num_blocks) {
- LOG_WARNING("Class mismatch, bank %d is not FlexRAM",
- bank->bank_number);
+ LOG_WARNING("Class mismatch, bank %d is not FlexRAM", bank->bank_number);
reassign = 1;
} else if (bank->size != ee_size) {
LOG_WARNING("FlexRAM size mismatch");
} else if (bank->base != FLEXRAM) {
LOG_WARNING("FlexRAM address mismatch");
reassign = 1;
- } else if (kinfo->sector_size !=
- kinetis_flash_params[granularity].nvm_sector_size_bytes) {
+ } else if (kinfo->sector_size != nvm_sector_size_bytes) {
LOG_WARNING("FlexRAM sector size mismatch");
reassign = 1;
} else {
- LOG_DEBUG("FlexRAM bank %d already configured okay",
- kinfo->bank_ordinal);
+ LOG_DEBUG("FlexRAM bank %d already configured okay", kinfo->bank_ordinal);
}
break;
if (!reassign)
return ERROR_OK;
- kinfo->granularity = granularity;
-
if ((unsigned)bank->bank_number < num_pflash_blocks) {
/* pflash, banks start at address zero */
kinfo->flash_class = FC_PFLASH;
bank->size = (pf_size / num_pflash_blocks);
bank->base = 0x00000000 + bank->size * bank->bank_number;
- kinfo->sector_size = kinetis_flash_params[granularity].pflash_sector_size_bytes;
+ kinfo->sector_size = pflash_sector_size_bytes;
kinfo->protection_size = pf_size / 32;
} else if ((unsigned)bank->bank_number < num_blocks) {
/* nvm, banks start at address 0x10000000 */
kinfo->flash_class = FC_FLEX_NVM;
bank->size = (nvm_size / num_nvm_blocks);
bank->base = 0x10000000 + bank->size * (bank->bank_number - first_nvm_bank);
- kinfo->sector_size = kinetis_flash_params[granularity].nvm_sector_size_bytes;
+ kinfo->sector_size = nvm_sector_size_bytes;
kinfo->protection_size = 0; /* FIXME: TODO: depends on DEPART bits, chip */
} else if ((unsigned)bank->bank_number == num_blocks) {
LOG_ERROR("FlexRAM support not yet implemented");
return ERROR_FLASH_OPER_UNSUPPORTED;
} else {
LOG_ERROR("Cannot determine parameters for bank %d, only %d banks on device",
- bank->bank_number, num_blocks);
+ bank->bank_number, num_blocks);
return ERROR_FLASH_BANK_INVALID;
}
bank->sectors = NULL;
}
+ if (kinfo->sector_size == 0) {
+ LOG_ERROR("Unknown sector size for bank %d", bank->bank_number);
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ if (kinfo->flash_support & FS_PROGRAM_SECTOR
+ && kinfo->max_flash_prog_size == 0) {
+ kinfo->max_flash_prog_size = kinfo->sector_size;
+ /* Program section size is equal to sector size by default */
+ }
+
bank->num_sectors = bank->size / kinfo->sector_size;
assert(bank->num_sectors > 0);
bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
for (i = 0; i < bank->num_sectors; i++) {
/* normal margin */
result = kinetis_ftfx_command(bank, FTFx_CMD_SECTSTAT, bank->base + bank->sectors[i].offset,
- 0, 0, 0, 1, 0, 0, 0, 0, &ftfx_fstat);
+ 1, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat);
if (result == ERROR_OK) {
bank->sectors[i].is_erased = !(ftfx_fstat & 0x01);
return ERROR_OK;
}
-static int kinetis_flash_read(struct flash_bank *bank,
- uint8_t *buffer, uint32_t offset, uint32_t count)
-{
- LOG_WARNING("kinetis_flash_read not supported yet");
+static const struct command_registration kinetis_securtiy_command_handlers[] = {
+ {
+ .name = "check_security",
+ .mode = COMMAND_EXEC,
+ .help = "",
+ .usage = "",
+ .handler = kinetis_check_flash_security_status,
+ },
+ {
+ .name = "mass_erase",
+ .mode = COMMAND_EXEC,
+ .help = "",
+ .usage = "",
+ .handler = kinetis_mdm_mass_erase,
+ },
+ {
+ .name = "test_securing",
+ .mode = COMMAND_EXEC,
+ .help = "",
+ .usage = "",
+ .handler = kinetis_securing_test,
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+static const struct command_registration kinetis_exec_command_handlers[] = {
+ {
+ .name = "mdm",
+ .mode = COMMAND_ANY,
+ .help = "",
+ .usage = "",
+ .chain = kinetis_securtiy_command_handlers,
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+static const struct command_registration kinetis_command_handler[] = {
+ {
+ .name = "kinetis",
+ .mode = COMMAND_ANY,
+ .help = "kinetis NAND flash controller commands",
+ .usage = "",
+ .chain = kinetis_exec_command_handlers,
+ },
+ COMMAND_REGISTRATION_DONE
+};
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
- return ERROR_FLASH_OPERATION_FAILED;
-}
struct flash_driver kinetis_flash = {
.name = "kinetis",
+ .commands = kinetis_command_handler,
.flash_bank_command = kinetis_flash_bank_command,
.erase = kinetis_erase,
.protect = kinetis_protect,
.write = kinetis_write,
- .read = kinetis_flash_read,
+ .read = default_flash_read,
.probe = kinetis_probe,
.auto_probe = kinetis_auto_probe,
.erase_check = kinetis_blank_check,
Code Review / openocd.git / blobdiff