FLASH/NOR: Remove useless file lpc2000.h
[openocd.git] / src / flash / nor / lpc2000.c
index 154248caf6aa98404a23018decde1b6592babd58..14d0e44db507c1d70a88008401ae49b5f1d60fa5 100644 (file)
@@ -26,7 +26,6 @@
 #endif
 
 #include "imp.h"
-#include "lpc2000.h"
 #include <helper/binarybuffer.h>
 #include <target/algorithm.h>
 #include <target/arm_opcodes.h>
  * - 176x (tested with LPC1768)
  */
 
+typedef enum
+{
+       lpc2000_v1,
+       lpc2000_v2,
+       lpc1700
+} lpc2000_variant;
+
+struct lpc2000_flash_bank
+{
+       lpc2000_variant variant;
+       struct working_area *iap_working_area;
+       uint32_t cclk;
+       int cmd51_dst_boundary;
+       int cmd51_can_256b;
+       int cmd51_can_8192b;
+       int calc_checksum;
+       uint32_t cmd51_max_buffer;
+       int checksum_vector;
+};
+
+enum lpc2000_status_codes
+{
+       LPC2000_CMD_SUCCESS = 0,
+       LPC2000_INVALID_COMMAND = 1,
+       LPC2000_SRC_ADDR_ERROR = 2,
+       LPC2000_DST_ADDR_ERROR = 3,
+       LPC2000_SRC_ADDR_NOT_MAPPED = 4,
+       LPC2000_DST_ADDR_NOT_MAPPED = 5,
+       LPC2000_COUNT_ERROR = 6,
+       LPC2000_INVALID_SECTOR = 7,
+       LPC2000_SECTOR_NOT_BLANK = 8,
+       LPC2000_SECTOR_NOT_PREPARED = 9,
+       LPC2000_COMPARE_ERROR = 10,
+       LPC2000_BUSY = 11,
+       LPC2000_PARAM_ERROR = 12,
+       LPC2000_ADDR_ERROR = 13,
+       LPC2000_ADDR_NOT_MAPPED = 14,
+       LPC2000_CMD_NOT_LOCKED = 15,
+       LPC2000_INVALID_CODE = 16,
+       LPC2000_INVALID_BAUD_RATE = 17,
+       LPC2000_INVALID_STOP_BIT = 18,
+       LPC2000_CRP_ENABLED = 19
+
+};
+
 static int lpc2000_build_sector_list(struct flash_bank *bank)
 {
        struct lpc2000_flash_bank *lpc2000_info = bank->driver_priv;
@@ -346,7 +390,7 @@ static int lpc2000_iap_call(struct flash_bank *bank, int code, uint32_t param_ta
                        init_reg_param(&reg_params[4], "lr", 32, PARAM_OUT);
                        buf_set_u32(reg_params[4].value, 0, 32, (lpc2000_info->iap_working_area->address + 0x04) | 1); /* bit0 of LR = 1 to return in Thumb mode */
 
-                       target_run_algorithm(target, 2, mem_params, 5, reg_params, lpc2000_info->iap_working_area->address, lpc2000_info->iap_working_area->address + 0x4, 10000, &armv7m_info);
+                       target_run_algorithm(target, 2, mem_params, 5, reg_params, lpc2000_info->iap_working_area->address, 0, 10000, &armv7m_info);
                        break;
                case lpc2000_v1:
                case lpc2000_v2:
@@ -594,7 +638,6 @@ static int lpc2000_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offs
        if ((offset == 0) && (count >= 0x20) && lpc2000_info->calc_checksum)
        {
                uint32_t checksum = 0;
-               int i;
                for (i = 0; i < 8; i++)
                {
                        LOG_DEBUG("Vector 0x%2.2x: 0x%8.8" PRIx32, i * 4, buf_get_u32(buffer + (i * 4), 0, 32));
@@ -740,7 +783,7 @@ static int lpc2000_protect_check(struct flash_bank *bank)
        return ERROR_OK;
 }
 
-static int lpc2000_info(struct flash_bank *bank, char *buf, int buf_size)
+static int get_lpc2000_info(struct flash_bank *bank, char *buf, int buf_size)
 {
        struct lpc2000_flash_bank *lpc2000_info = bank->driver_priv;
 
@@ -819,5 +862,5 @@ struct flash_driver lpc2000_flash = {
        .auto_probe = lpc2000_probe,
        .erase_check = lpc2000_erase_check,
        .protect_check = lpc2000_protect_check,
-       .info = lpc2000_info,
+       .info = get_lpc2000_info,
 };

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)