flash/nor/at91samd: set usage for command "set-security"
[openocd.git] / src / flash / nor / lpcspifi.c
index 4eb6cc38ae90d2f3600dc7aed79ac1b779fadc86..19d754b0f22d2aacb96a2cddd83ba9f08e1aa866 100644 (file)
@@ -186,7 +186,7 @@ static int lpcspifi_set_hw_mode(struct flash_bank *bank)
                return retval;
        }
 
-       LOG_DEBUG("Writing algorithm to working area at 0x%08" PRIx32,
+       LOG_DEBUG("Writing algorithm to working area at " TARGET_ADDR_FMT,
                spifi_init_algorithm->address);
        /* Write algorithm to working area */
        retval = target_write_buffer(target,
@@ -387,6 +387,9 @@ static int lpcspifi_bulk_erase(struct flash_bank *bank)
        uint32_t value;
        int retval = ERROR_OK;
 
+       if (lpcspifi_info->dev->chip_erase_cmd == 0x00)
+               return ERROR_FLASH_OPER_UNSUPPORTED;
+
        retval = lpcspifi_set_sw_mode(bank);
 
        if (retval == ERROR_OK)
@@ -460,6 +463,9 @@ static int lpcspifi_erase(struct flash_bank *bank, int first, int last)
                        LOG_WARNING("Bulk flash erase failed. Falling back to sector-by-sector erase.");
        }
 
+       if (lpcspifi_info->dev->erase_cmd == 0x00)
+               return ERROR_FLASH_OPER_UNSUPPORTED;
+
        retval = lpcspifi_set_hw_mode(bank);
        if (retval != ERROR_OK)
                return retval;
@@ -613,7 +619,9 @@ static int lpcspifi_write(struct flash_bank *bank, const uint8_t *buffer,
                }
        }
 
-       page_size = lpcspifi_info->dev->pagesize;
+       /* if no valid page_size, use reasonable default */
+       page_size = lpcspifi_info->dev->pagesize ?
+               lpcspifi_info->dev->pagesize : SPIFLASH_DEF_PAGESIZE;
 
        retval = lpcspifi_set_hw_mode(bank);
        if (retval != ERROR_OK)
@@ -839,6 +847,7 @@ static int lpcspifi_probe(struct flash_bank *bank)
        struct flash_sector *sectors;
        uint32_t id = 0; /* silence uninitialized warning */
        int retval;
+       uint32_t sectorsize;
 
        /* If we've already probed, we should be fine to skip this time. */
        if (lpcspifi_info->probed)
@@ -876,10 +885,17 @@ static int lpcspifi_probe(struct flash_bank *bank)
 
        /* Set correct size value */
        bank->size = lpcspifi_info->dev->size_in_bytes;
+       if (bank->size <= (1UL << 16))
+               LOG_WARNING("device needs 2-byte addresses - not implemented");
+       if (bank->size > (1UL << 24))
+               LOG_WARNING("device needs paging or 4-byte addresses - not implemented");
+
+       /* if no sectors, treat whole bank as single sector */
+       sectorsize = lpcspifi_info->dev->sectorsize ?
+               lpcspifi_info->dev->sectorsize : lpcspifi_info->dev->size_in_bytes;
 
        /* create and fill sectors array */
-       bank->num_sectors =
-               lpcspifi_info->dev->size_in_bytes / lpcspifi_info->dev->sectorsize;
+       bank->num_sectors = lpcspifi_info->dev->size_in_bytes / sectorsize;
        sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
        if (sectors == NULL) {
                LOG_ERROR("not enough memory");
@@ -887,8 +903,8 @@ static int lpcspifi_probe(struct flash_bank *bank)
        }
 
        for (int sector = 0; sector < bank->num_sectors; sector++) {
-               sectors[sector].offset = sector * lpcspifi_info->dev->sectorsize;
-               sectors[sector].size = lpcspifi_info->dev->sectorsize;
+               sectors[sector].offset = sector * sectorsize;
+               sectors[sector].size = sectorsize;
                sectors[sector].is_erased = -1;
                sectors[sector].is_protected = 0;
        }
@@ -930,7 +946,7 @@ static int get_lpcspifi_info(struct flash_bank *bank, char *buf, int buf_size)
        return ERROR_OK;
 }
 
-struct flash_driver lpcspifi_flash = {
+const struct flash_driver lpcspifi_flash = {
        .name = "lpcspifi",
        .flash_bank_command = lpcspifi_flash_bank_command,
        .erase = lpcspifi_erase,
@@ -942,4 +958,5 @@ struct flash_driver lpcspifi_flash = {
        .erase_check = default_flash_blank_check,
        .protect_check = lpcspifi_protect_check,
        .info = get_lpcspifi_info,
+       .free_driver_priv = default_flash_free_driver_priv,
 };

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)