--- /dev/null
+/***************************************************************************
+ * Copyright (C) 2016 by Maxim Integrated *
+ * Kevin Gillespie <kevin.gillespie@maximintegrated.com> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program. If not, see <http://www.gnu.org/licenses/>. *
+ ***************************************************************************/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "imp.h"
+#include <target/algorithm.h>
+#include <target/armv7m.h>
+
+/* Register Addresses */
+#define FLSH_ADDR 0x000
+#define FLSH_CLKDIV 0x004
+#define FLSH_CN 0x008
+#define PR1E_ADDR 0x00C
+#define PR2S_ADDR 0x010
+#define PR2E_ADDR 0x014
+#define PR3S_ADDR 0x018
+#define PR3E_ADDR 0x01C
+#define FLSH_MD 0x020
+#define FLSH_INT 0x024
+#define FLSH_DATA0 0x030
+#define FLSH_DATA1 0x034
+#define FLSH_DATA2 0x038
+#define FLSH_DATA3 0x03C
+#define FLSH_BL_CTRL 0x170
+#define FLSH_PROT 0x300
+
+#define ARM_PID_REG 0xE00FFFE0
+#define MAX326XX_ID_REG 0x40000838
+
+/* Register settings */
+#define FLSH_INT_AF 0x00000002
+
+#define FLSH_CN_UNLOCK_MASK 0xF0000000
+#define FLSH_CN_UNLOCK_VALUE 0x20000000
+
+#define FLSH_CN_PEND 0x01000000
+
+#define FLSH_CN_ERASE_CODE_MASK 0x0000FF00
+#define FLSH_CN_ERASE_CODE_PGE 0x00005500
+#define FLSH_CN_ERASE_CODE_ME 0x0000AA00
+
+#define FLSH_CN_PGE 0x00000004
+#define FLSH_CN_ME 0x00000002
+#define FLSH_CN_WR 0x00000001
+#define FLASH_BL_CTRL_23 0x00020000
+#define FLASH_BL_CTRL_IFREN 0x00000001
+
+#define ARM_PID_DEFAULT_CM3 0xB4C3
+#define ARM_PID_DEFAULT_CM4 0xB4C4
+#define MAX326XX_ID 0x4D
+
+static int max32xxx_mass_erase(struct flash_bank *bank);
+
+struct max32xxx_flash_bank {
+ int probed;
+ int max326xx;
+ unsigned int flash_size;
+ unsigned int flc_base;
+ unsigned int sector_size;
+ unsigned int clkdiv_value;
+ unsigned int int_state;
+ unsigned int burst_size_bits;
+};
+
+/* see contib/loaders/flash/max32xxx/max32xxx.s for src */
+static const uint8_t write_code[] = {
+#include "../../contrib/loaders/flash/max32xxx/max32xxx.inc"
+};
+
+/* Config Command: flash bank name driver base size chip_width bus_width target [driver_option]
+ flash bank max32xxx <base> <size> 0 0 <target> <FLC base> <sector size> <clkdiv> [burst_bits]
+ */
+FLASH_BANK_COMMAND_HANDLER(max32xxx_flash_bank_command)
+{
+ struct max32xxx_flash_bank *info;
+
+ if (CMD_ARGC < 9) {
+ LOG_WARNING("incomplete flash bank max32xxx configuration: <base> <size> 0 0 <target> <FLC base> <sector size> <clkdiv> [burst_bits]");
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ info = calloc(sizeof(struct max32xxx_flash_bank), 1);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], info->flash_size);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[6], info->flc_base);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[7], info->sector_size);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[8], info->clkdiv_value);
+
+ if (CMD_ARGC > 9)
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[9], info->burst_size_bits);
+ else
+ info->burst_size_bits = 32;
+
+ info->int_state = 0;
+ bank->driver_priv = info;
+ return ERROR_OK;
+}
+
+static int get_info(struct flash_bank *bank, char *buf, int buf_size)
+{
+ int printed;
+ struct max32xxx_flash_bank *info = bank->driver_priv;
+
+ if (info->probed == 0)
+ return ERROR_FLASH_BANK_NOT_PROBED;
+
+ printed = snprintf(buf, buf_size, "\nMaxim Integrated max32xxx flash driver\n");
+ buf += printed;
+ buf_size -= printed;
+ return ERROR_OK;
+}
+
+/***************************************************************************
+* flash operations
+***************************************************************************/
+
+static int max32xxx_flash_op_pre(struct flash_bank *bank)
+{
+ struct target *target = bank->target;
+ struct max32xxx_flash_bank *info = bank->driver_priv;
+ uint32_t flsh_cn;
+ uint32_t bootloader;
+
+ /* Check if the flash controller is busy */
+ target_read_u32(target, info->flc_base + FLSH_CN, &flsh_cn);
+ if (flsh_cn & (FLSH_CN_PEND | FLSH_CN_ERASE_CODE_MASK | FLSH_CN_PGE |
+ FLSH_CN_ME | FLSH_CN_WR))
+ return ERROR_FLASH_BUSY;
+
+ /* Refresh flash controller timing */
+ target_write_u32(target, info->flc_base + FLSH_CLKDIV, info->clkdiv_value);
+
+ /* Clear and disable flash programming interrupts */
+ target_read_u32(target, info->flc_base + FLSH_INT, &info->int_state);
+ target_write_u32(target, info->flc_base + FLSH_INT, 0x00000000);
+
+ /* Clear the lower bit in the bootloader configuration register in case flash page 0 has been replaced */
+ if (target_read_u32(target, info->flc_base + FLSH_BL_CTRL, &bootloader) != ERROR_OK) {
+ LOG_ERROR("Read failure on FLSH_BL_CTRL");
+ return ERROR_FAIL;
+ }
+ if (bootloader & FLASH_BL_CTRL_23) {
+ LOG_WARNING("FLSH_BL_CTRL indicates BL mode 2 or mode 3.");
+ if (bootloader & FLASH_BL_CTRL_IFREN) {
+ LOG_WARNING("Flash page 0 swapped out, attempting to swap back in for programming");
+ bootloader &= ~(FLASH_BL_CTRL_IFREN);
+ if (target_write_u32(target, info->flc_base + FLSH_BL_CTRL, bootloader) != ERROR_OK) {
+ LOG_ERROR("Write failure on FLSH_BL_CTRL");
+ return ERROR_FAIL;
+ }
+ if (target_read_u32(target, info->flc_base + FLSH_BL_CTRL, &bootloader) != ERROR_OK) {
+ LOG_ERROR("Read failure on FLSH_BL_CTRL");
+ return ERROR_FAIL;
+ }
+ if (bootloader & FLASH_BL_CTRL_IFREN) {
+ /* Bummer */
+ LOG_ERROR("Unable to swap flash page 0 back in. Writes to page 0 will fail.");
+ }
+ }
+ }
+
+ /* Unlock flash */
+ flsh_cn &= ~FLSH_CN_UNLOCK_MASK;
+ flsh_cn |= FLSH_CN_UNLOCK_VALUE;
+ target_write_u32(target, info->flc_base + FLSH_CN, flsh_cn);
+
+ /* Confirm flash is unlocked */
+ target_read_u32(target, info->flc_base + FLSH_CN, &flsh_cn);
+ if ((flsh_cn & FLSH_CN_UNLOCK_VALUE) != FLSH_CN_UNLOCK_VALUE)
+ return ERROR_FAIL;
+
+ return ERROR_OK;
+}
+
+static int max32xxx_flash_op_post(struct flash_bank *bank)
+{
+ struct target *target = bank->target;
+ struct max32xxx_flash_bank *info = bank->driver_priv;
+ uint32_t flsh_cn;
+
+ /* Restore flash programming interrupts */
+ target_write_u32(target, info->flc_base + FLSH_INT, info->int_state);
+
+ /* Lock flash */
+ target_read_u32(target, info->flc_base + FLSH_CN, &flsh_cn);
+ flsh_cn &= ~FLSH_CN_UNLOCK_MASK;
+ target_write_u32(target, info->flc_base + FLSH_CN, flsh_cn);
+ return ERROR_OK;
+}
+
+static int max32xxx_protect_check(struct flash_bank *bank)
+{
+ struct max32xxx_flash_bank *info = bank->driver_priv;
+ struct target *target = bank->target;
+ int i;
+ uint32_t temp_reg;
+
+ if (info->probed == 0)
+ return ERROR_FLASH_BANK_NOT_PROBED;
+
+ if (!info->max326xx) {
+ for (i = 0; i < bank->num_sectors; i++)
+ bank->sectors[i].is_protected = -1;
+
+ return ERROR_FLASH_OPER_UNSUPPORTED;
+ }
+
+ /* Check the protection */
+ for (i = 0; i < bank->num_sectors; i++) {
+ if (i%32 == 0)
+ target_read_u32(target, info->flc_base + FLSH_PROT + ((i/32)*4), &temp_reg);
+
+ if (temp_reg & (0x1 << i%32))
+ bank->sectors[i].is_protected = 1;
+ else
+ bank->sectors[i].is_protected = 0;
+ }
+ return ERROR_OK;
+}
+
+static int max32xxx_erase(struct flash_bank *bank, int first, int last)
+{
+ int banknr;
+ uint32_t flsh_cn, flsh_int;
+ struct max32xxx_flash_bank *info = bank->driver_priv;
+ struct target *target = bank->target;
+ int retval;
+ int retry;
+
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (info->probed == 0)
+ return ERROR_FLASH_BANK_NOT_PROBED;
+
+ if ((first < 0) || (last < first) || (last >= bank->num_sectors))
+ return ERROR_FLASH_SECTOR_INVALID;
+
+ if ((first == 0) && (last == (bank->num_sectors - 1)))
+ return max32xxx_mass_erase(bank);
+
+ /* Prepare to issue flash operation */
+ retval = max32xxx_flash_op_pre(bank);
+
+ if (retval != ERROR_OK)
+ return retval;
+
+ int erased = 0;
+ for (banknr = first; banknr <= last; banknr++) {
+
+ /* Check the protection */
+ if (bank->sectors[banknr].is_protected == 1) {
+ LOG_WARNING("Flash sector %d is protected", banknr);
+ continue;
+ } else
+ erased = 1;
+
+ /* Address is first word in page */
+ target_write_u32(target, info->flc_base + FLSH_ADDR, banknr * info->sector_size);
+
+ /* Write page erase code */
+ target_read_u32(target, info->flc_base + FLSH_CN, &flsh_cn);
+ flsh_cn |= FLSH_CN_ERASE_CODE_PGE;
+ target_write_u32(target, info->flc_base + FLSH_CN, flsh_cn);
+
+ /* Issue page erase command */
+ flsh_cn |= 0x4;
+ target_write_u32(target, info->flc_base + FLSH_CN, flsh_cn);
+
+ /* Wait until erase complete */
+ retry = 1000;
+ do {
+ target_read_u32(target, info->flc_base + FLSH_CN, &flsh_cn);
+ } while ((--retry > 0) && (flsh_cn & FLSH_CN_PEND));
+
+ if (retry <= 0) {
+ LOG_ERROR("Timed out waiting for flash page erase @ 0x%08x",
+ banknr * info->sector_size);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ /* Check access violations */
+ target_read_u32(target, info->flc_base + FLSH_INT, &flsh_int);
+ if (flsh_int & FLSH_INT_AF) {
+ LOG_ERROR("Error erasing flash page %i", banknr);
+ target_write_u32(target, info->flc_base + FLSH_INT, 0);
+ max32xxx_flash_op_post(bank);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ bank->sectors[banknr].is_erased = 1;
+ }
+
+ if (!erased) {
+ LOG_ERROR("All pages protected %d to %d", first, last);
+ max32xxx_flash_op_post(bank);
+ return ERROR_FAIL;
+ }
+
+ if (max32xxx_flash_op_post(bank) != ERROR_OK)
+ return ERROR_FAIL;
+
+ return ERROR_OK;
+}
+
+static int max32xxx_protect(struct flash_bank *bank, int set, int first, int last)
+{
+ struct max32xxx_flash_bank *info = bank->driver_priv;
+ struct target *target = bank->target;
+ int page;
+ uint32_t temp_reg;
+
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (info->probed == 0)
+ return ERROR_FLASH_BANK_NOT_PROBED;
+
+ if (!info->max326xx)
+ return ERROR_FLASH_OPER_UNSUPPORTED;
+
+ if ((first < 0) || (last < first) || (last >= bank->num_sectors))
+ return ERROR_FLASH_SECTOR_INVALID;
+
+ /* Setup the protection on the pages given */
+ for (page = first; page <= last; page++) {
+ if (set) {
+ /* Set the write/erase bit for this page */
+ target_read_u32(target, info->flc_base + FLSH_PROT + (page/32), &temp_reg);
+ temp_reg |= (0x1 << page%32);
+ target_write_u32(target, info->flc_base + FLSH_PROT + (page/32), temp_reg);
+ bank->sectors[page].is_protected = 1;
+ } else {
+ /* Clear the write/erase bit for this page */
+ target_read_u32(target, info->flc_base + FLSH_PROT + (page/32), &temp_reg);
+ temp_reg &= ~(0x1 << page%32);
+ target_write_u32(target, info->flc_base + FLSH_PROT + (page/32), temp_reg);
+ bank->sectors[page].is_protected = 0;
+ }
+ }
+
+ return ERROR_OK;
+}
+
+static int max32xxx_write_block(struct flash_bank *bank, const uint8_t *buffer,
+ uint32_t offset, uint32_t wcount)
+{
+ struct max32xxx_flash_bank *info = bank->driver_priv;
+ struct target *target = bank->target;
+ uint32_t buffer_size = 16384;
+ struct working_area *source;
+ struct working_area *write_algorithm;
+ uint32_t address = bank->base + offset;
+ struct reg_param reg_params[5];
+ struct armv7m_algorithm armv7m_info;
+ int retval = ERROR_OK;
+ /* power of two, and multiple of word size */
+ static const unsigned buf_min = 128;
+
+ /* for small buffers it's faster not to download an algorithm */
+ if (wcount * 4 < buf_min)
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+
+ LOG_DEBUG("(bank=%p buffer=%p offset=%08" PRIx32 " wcount=%08" PRIx32 "",
+ bank, buffer, offset, wcount);
+
+ /* flash write code */
+ if (target_alloc_working_area(target, sizeof(write_code), &write_algorithm) != ERROR_OK) {
+ LOG_DEBUG("no working area for block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+
+ /* plus a buffer big enough for this data */
+ if (wcount * 4 < buffer_size)
+ buffer_size = wcount * 4;
+
+ /* memory buffer */
+ while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
+ buffer_size /= 2;
+
+ if (buffer_size <= buf_min) {
+ target_free_working_area(target, write_algorithm);
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+
+ LOG_DEBUG("retry target_alloc_working_area(%s, size=%u)",
+ target_name(target), (unsigned) buffer_size);
+ }
+
+ target_write_buffer(target, write_algorithm->address, sizeof(write_code),
+ write_code);
+
+ armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
+ armv7m_info.core_mode = ARM_MODE_THREAD;
+ init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
+ init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
+ init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
+ init_reg_param(®_params[3], "r3", 32, PARAM_OUT);
+ init_reg_param(®_params[4], "r4", 32, PARAM_OUT);
+
+ buf_set_u32(reg_params[0].value, 0, 32, source->address);
+ buf_set_u32(reg_params[1].value, 0, 32, source->address + source->size);
+ buf_set_u32(reg_params[2].value, 0, 32, address);
+ buf_set_u32(reg_params[3].value, 0, 32, wcount);
+ buf_set_u32(reg_params[4].value, 0, 32, info->flc_base);
+ retval = target_run_flash_async_algorithm(target, buffer, wcount, 4, 0, NULL,
+ 5, reg_params, source->address, source->size, write_algorithm->address, 0, &armv7m_info);
+
+ if (retval == ERROR_FLASH_OPERATION_FAILED)
+ LOG_ERROR("error %d executing max32xxx flash write algorithm", retval);
+
+ target_free_working_area(target, write_algorithm);
+ target_free_working_area(target, source);
+ destroy_reg_param(®_params[0]);
+ destroy_reg_param(®_params[1]);
+ destroy_reg_param(®_params[2]);
+ destroy_reg_param(®_params[3]);
+ destroy_reg_param(®_params[4]);
+ return retval;
+}
+
+static int max32xxx_write(struct flash_bank *bank, const uint8_t *buffer,
+ uint32_t offset, uint32_t count)
+{
+ struct max32xxx_flash_bank *info = bank->driver_priv;
+ struct target *target = bank->target;
+ uint32_t flsh_cn, flsh_int;
+ uint32_t address = offset;
+ uint32_t remaining = count;
+ uint32_t words_remaining;
+ int retval;
+ int retry;
+
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ LOG_DEBUG("bank=%p buffer=%p offset=%08" PRIx32 " count=%08" PRIx32 "",
+ bank, buffer, offset, count);
+
+ if (info->probed == 0)
+ return ERROR_FLASH_BANK_NOT_PROBED;
+
+ if (offset & 0x3) {
+ LOG_WARNING("offset size must be word aligned");
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
+
+ if (offset + count > bank->size)
+ return ERROR_FLASH_DST_OUT_OF_BANK;
+
+ /* Prepare to issue flash operation */
+ retval = max32xxx_flash_op_pre(bank);
+
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (remaining >= 4) {
+ /* write in 32-bit units */
+ target_read_u32(target, info->flc_base + FLSH_CN, &flsh_cn);
+ flsh_cn &= 0xF7FFFFFF;
+ flsh_cn |= 0x00000010;
+ target_write_u32(target, info->flc_base + FLSH_CN, flsh_cn);
+
+ /* try using a block write */
+ words_remaining = remaining / 4;
+ retval = max32xxx_write_block(bank, buffer, offset, words_remaining);
+
+ if (retval != ERROR_OK) {
+ if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
+ LOG_DEBUG("writing flash word-at-a-time");
+ else {
+ max32xxx_flash_op_post(bank);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ } else {
+ /* all 32-bit words have been written */
+ buffer += words_remaining * 4;
+ address += words_remaining * 4;
+ remaining -= words_remaining * 4;
+ }
+ }
+
+ if ((remaining >= 4) && ((address & 0x1F) != 0)) {
+ /* write in 32-bit units until we are 128-bit aligned */
+ target_read_u32(target, info->flc_base + FLSH_CN, &flsh_cn);
+ flsh_cn &= 0xF7FFFFFF;
+ flsh_cn |= 0x00000010;
+ target_write_u32(target, info->flc_base + FLSH_CN, flsh_cn);
+
+ while ((remaining >= 4) && ((address & 0x1F) != 0)) {
+ target_write_u32(target, info->flc_base + FLSH_ADDR, address);
+ target_write_buffer(target, info->flc_base + FLSH_DATA0, 4, buffer);
+ flsh_cn |= 0x00000001;
+ target_write_u32(target, info->flc_base + FLSH_CN, flsh_cn);
+ /* Wait until flash operation is complete */
+ retry = 10;
+
+ do {
+ target_read_u32(target, info->flc_base + FLSH_CN, &flsh_cn);
+ } while ((--retry > 0) && (flsh_cn & FLSH_CN_PEND));
+
+ if (retry <= 0) {
+ LOG_ERROR("Timed out waiting for flash write @ 0x%08x", address);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ buffer += 4;
+ address += 4;
+ remaining -= 4;
+ }
+ }
+
+ if ((info->burst_size_bits == 128) && (remaining >= 16)) {
+ /* write in 128-bit bursts while we can */
+ target_read_u32(target, info->flc_base + FLSH_CN, &flsh_cn);
+
+ flsh_cn &= 0xFFFFFFEF;
+ flsh_cn |= 0x08000000;
+ target_write_u32(target, info->flc_base + FLSH_CN, flsh_cn);
+ target_write_u32(target, info->flc_base + FLSH_ADDR, address);
+
+ while (remaining >= 16) {
+ if ((address & 0xFFF) == 0)
+ LOG_DEBUG("Writing @ 0x%08x", address);
+
+ target_write_buffer(target, info->flc_base + FLSH_DATA0, 16, buffer);
+ flsh_cn |= 0x00000001;
+ target_write_u32(target, info->flc_base + FLSH_CN, flsh_cn);
+ /* Wait until flash operation is complete */
+ retry = 10;
+
+ do {
+ target_read_u32(target, info->flc_base + FLSH_CN, &flsh_cn);
+ } while ((--retry > 0) && (flsh_cn & FLSH_CN_PEND));
+
+ if (retry <= 0) {
+ LOG_ERROR("Timed out waiting for flash write @ 0x%08x", address);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ buffer += 16;
+ address += 16;
+ remaining -= 16;
+ }
+ }
+
+ if (remaining >= 4) {
+
+ /* write in 32-bit units while we can */
+ target_read_u32(target, info->flc_base + FLSH_CN, &flsh_cn);
+ flsh_cn &= 0xF7FFFFFF;
+ flsh_cn |= 0x00000010;
+ target_write_u32(target, info->flc_base + FLSH_CN, flsh_cn);
+
+ while (remaining >= 4) {
+ target_write_u32(target, info->flc_base + FLSH_ADDR, address);
+ target_write_buffer(target, info->flc_base + FLSH_DATA0, 4, buffer);
+ flsh_cn |= 0x00000001;
+ target_write_u32(target, info->flc_base + FLSH_CN, flsh_cn);
+ /* Wait until flash operation is complete */
+ retry = 10;
+
+ do {
+ target_read_u32(target, info->flc_base + FLSH_CN, &flsh_cn);
+ } while ((--retry > 0) && (flsh_cn & FLSH_CN_PEND));
+
+ if (retry <= 0) {
+ LOG_ERROR("Timed out waiting for flash write @ 0x%08x", address);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ buffer += 4;
+ address += 4;
+ remaining -= 4;
+ }
+ }
+
+ if (remaining > 0) {
+ /* write remaining bytes in a 32-bit unit */
+ target_read_u32(target, info->flc_base + FLSH_CN, &flsh_cn);
+ flsh_cn &= 0xF7FFFFFF;
+ flsh_cn |= 0x00000010;
+ target_write_u32(target, info->flc_base + FLSH_CN, flsh_cn);
+
+ uint8_t last_word[4] = {0xff, 0xff, 0xff, 0xff};
+ int i = 0;
+
+ while (remaining > 0) {
+ last_word[i++] = *buffer;
+ buffer++;
+ remaining--;
+ }
+
+ target_write_u32(target, info->flc_base + FLSH_ADDR, address);
+ target_write_buffer(target, info->flc_base + FLSH_DATA0, 4, last_word);
+ flsh_cn |= 0x00000001;
+ target_write_u32(target, info->flc_base + FLSH_CN, flsh_cn);
+ /* Wait until flash operation is complete */
+ retry = 10;
+
+ do {
+ target_read_u32(target, info->flc_base + FLSH_CN, &flsh_cn);
+ } while ((--retry > 0) && (flsh_cn & FLSH_CN_PEND));
+
+ if (retry <= 0) {
+ LOG_ERROR("Timed out waiting for flash write @ 0x%08x", address);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+
+ /* Check access violations */
+ target_read_u32(target, info->flc_base + FLSH_INT, &flsh_int);
+ if (flsh_int & FLSH_INT_AF) {
+ LOG_ERROR("Flash Error writing 0x%x bytes at 0x%08x", count, offset);
+ max32xxx_flash_op_post(bank);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if (max32xxx_flash_op_post(bank) != ERROR_OK)
+ return ERROR_FAIL;
+
+ return ERROR_OK;
+}
+
+static int max32xxx_probe(struct flash_bank *bank)
+{
+ struct max32xxx_flash_bank *info = bank->driver_priv;
+ struct target *target = bank->target;
+ uint32_t arm_id[2];
+ uint16_t arm_pid;
+
+ if (bank->sectors) {
+ free(bank->sectors);
+ bank->sectors = NULL;
+ }
+
+ /* provide this for the benefit of the NOR flash framework */
+ bank->size = info->flash_size;
+ bank->num_sectors = info->flash_size / info->sector_size;
+ bank->sectors = calloc(bank->num_sectors, sizeof(struct flash_sector));
+
+ for (int i = 0; i < bank->num_sectors; i++) {
+ bank->sectors[i].offset = i * info->sector_size;
+ bank->sectors[i].size = info->sector_size;
+ bank->sectors[i].is_erased = -1;
+ bank->sectors[i].is_protected = -1;
+ }
+
+ /* Probe to determine if this part is in the max326xx family */
+ info->max326xx = 0;
+ target_read_u32(target, ARM_PID_REG, &arm_id[0]);
+ target_read_u32(target, ARM_PID_REG+4, &arm_id[1]);
+ arm_pid = (arm_id[1] << 8) + arm_id[0];
+ LOG_DEBUG("arm_pid = 0x%x", arm_pid);
+
+ if ((arm_pid == ARM_PID_DEFAULT_CM3) || arm_pid == ARM_PID_DEFAULT_CM4) {
+ uint32_t max326xx_id;
+ target_read_u32(target, MAX326XX_ID_REG, &max326xx_id);
+ LOG_DEBUG("max326xx_id = 0x%x", max326xx_id);
+ max326xx_id = ((max326xx_id & 0xFF000000) >> 24);
+ if (max326xx_id == MAX326XX_ID)
+ info->max326xx = 1;
+ }
+ LOG_DEBUG("info->max326xx = %d", info->max326xx);
+
+ /* Initialize the protection bits for each flash page */
+ if (max32xxx_protect_check(bank) == ERROR_FLASH_OPER_UNSUPPORTED)
+ LOG_WARNING("Flash protection not supported on this device");
+
+ info->probed = 1;
+ return ERROR_OK;
+}
+
+static int max32xxx_mass_erase(struct flash_bank *bank)
+{
+ struct target *target = NULL;
+ struct max32xxx_flash_bank *info = NULL;
+ uint32_t flsh_cn, flsh_int;
+ int retval;
+ int retry;
+ info = bank->driver_priv;
+ target = bank->target;
+
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (info->probed == 0)
+ return ERROR_FLASH_BANK_NOT_PROBED;
+
+ int not_protected = 0;
+ for (int i = 0; i < bank->num_sectors; i++) {
+ if (bank->sectors[i].is_protected == 1)
+ LOG_WARNING("Flash sector %d is protected", i);
+ else
+ not_protected = 1;
+ }
+
+ if (!not_protected) {
+ LOG_ERROR("All pages protected");
+ return ERROR_FAIL;
+ }
+
+ /* Prepare to issue flash operation */
+ retval = max32xxx_flash_op_pre(bank);
+
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* Write mass erase code */
+ target_read_u32(target, info->flc_base + FLSH_CN, &flsh_cn);
+ flsh_cn |= FLSH_CN_ERASE_CODE_ME;
+ target_write_u32(target, info->flc_base + FLSH_CN, flsh_cn);
+
+ /* Issue mass erase command */
+ flsh_cn |= 0x2;
+ target_write_u32(target, info->flc_base + FLSH_CN, flsh_cn);
+
+ /* Wait until erase complete */
+ retry = 1000;
+ do {
+ target_read_u32(target, info->flc_base + FLSH_CN, &flsh_cn);
+ } while ((--retry > 0) && (flsh_cn & FLSH_CN_PEND));
+
+ if (retry <= 0) {
+ LOG_ERROR("Timed out waiting for flash mass erase");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ /* Check access violations */
+ target_read_u32(target, info->flc_base + FLSH_INT, &flsh_int);
+ if (flsh_int & FLSH_INT_AF) {
+ LOG_ERROR("Error mass erasing");
+ target_write_u32(target, info->flc_base + FLSH_INT, 0);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if (max32xxx_flash_op_post(bank) != ERROR_OK)
+ return ERROR_FAIL;
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(max32xxx_handle_mass_erase_command)
+{
+ int i;
+ struct flash_bank *bank;
+ int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
+
+ if (CMD_ARGC < 1) {
+ command_print(CMD_CTX, "max32xxx mass_erase <bank>");
+ return ERROR_OK;
+ }
+
+ if (ERROR_OK != retval)
+ return retval;
+
+ if (max32xxx_mass_erase(bank) == ERROR_OK) {
+ /* set all sectors as erased */
+ for (i = 0; i < bank->num_sectors; i++)
+ bank->sectors[i].is_erased = 1;
+
+ command_print(CMD_CTX, "max32xxx mass erase complete");
+ } else
+ command_print(CMD_CTX, "max32xxx mass erase failed");
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(max32xxx_handle_protection_set_command)
+{
+ struct flash_bank *bank;
+ int retval;
+ struct max32xxx_flash_bank *info;
+ uint32_t addr, len;
+
+ if (CMD_ARGC != 3) {
+ command_print(CMD_CTX, "max32xxx protection_set <bank> <addr> <size>");
+ return ERROR_OK;
+ }
+
+ retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
+ if (ERROR_OK != retval)
+ return retval;
+ info = bank->driver_priv;
+
+ /* Convert the range to the page numbers */
+ if (1 != sscanf(CMD_ARGV[1], "0x%"SCNx32, &addr)) {
+ LOG_WARNING("Error parsing address");
+ command_print(CMD_CTX, "max32xxx protection_set <bank> <addr> <size>");
+ return ERROR_FAIL;
+ }
+ /* Mask off the top portion on the address */
+ addr = (addr & 0x0FFFFFFF);
+
+ if (1 != sscanf(CMD_ARGV[2], "0x%"SCNx32, &len)) {
+ LOG_WARNING("Error parsing length");
+ command_print(CMD_CTX, "max32xxx protection_set <bank> <addr> <size>");
+ return ERROR_FAIL;
+ }
+
+ /* Check the address is in the range of the flash */
+ if ((addr+len) >= info->flash_size)
+ return ERROR_FLASH_SECTOR_INVALID;
+
+ if (len == 0)
+ return ERROR_OK;
+
+ /* Convert the address and length to the page boundaries */
+ addr = addr - (addr % info->sector_size);
+ if (len % info->sector_size)
+ len = len + info->sector_size - (len % info->sector_size);
+
+ /* Convert the address and length to page numbers */
+ addr = (addr / info->sector_size);
+ len = addr + (len / info->sector_size) - 1;
+
+ if (max32xxx_protect(bank, 1, addr, len) == ERROR_OK)
+ command_print(CMD_CTX, "max32xxx protection set complete");
+ else
+ command_print(CMD_CTX, "max32xxx protection set failed");
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(max32xxx_handle_protection_clr_command)
+{
+ struct flash_bank *bank;
+ int retval;
+ struct max32xxx_flash_bank *info;
+ uint32_t addr, len;
+
+ if (CMD_ARGC != 3) {
+ command_print(CMD_CTX, "max32xxx protection_clr <bank> <addr> <size>");
+ return ERROR_OK;
+ }
+
+ retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
+ if (ERROR_OK != retval)
+ return retval;
+ info = bank->driver_priv;
+
+ /* Convert the range to the page numbers */
+ if (1 != sscanf(CMD_ARGV[1], "0x%"SCNx32, &addr)) {
+ LOG_WARNING("Error parsing address");
+ command_print(CMD_CTX, "max32xxx protection_clr <bank> <addr> <size>");
+ return ERROR_FAIL;
+ }
+ /* Mask off the top portion on the address */
+ addr = (addr & 0x0FFFFFFF);
+
+ if (1 != sscanf(CMD_ARGV[2], "0x%"SCNx32, &len)) {
+ LOG_WARNING("Error parsing length");
+ command_print(CMD_CTX, "max32xxx protection_clr <bank> <addr> <size>");
+ return ERROR_FAIL;
+ }
+
+ /* Check the address is in the range of the flash */
+ if ((addr+len) >= info->flash_size)
+ return ERROR_FLASH_SECTOR_INVALID;
+
+ if (len == 0)
+ return ERROR_OK;
+
+ /* Convert the address and length to the page boundaries */
+ addr = addr - (addr % info->sector_size);
+ if (len % info->sector_size)
+ len = len + info->sector_size - (len % info->sector_size);
+
+ /* Convert the address and length to page numbers */
+ addr = (addr / info->sector_size);
+ len = addr + (len / info->sector_size) - 1;
+
+ if (max32xxx_protect(bank, 0, addr, len) == ERROR_OK)
+ command_print(CMD_CTX, "max32xxx protection clear complete");
+ else
+ command_print(CMD_CTX, "max32xxx protection clear failed");
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(max32xxx_handle_protection_check_command)
+{
+ struct flash_bank *bank;
+ int retval;
+ struct max32xxx_flash_bank *info;
+ int i;
+
+ if (CMD_ARGC < 1) {
+ command_print(CMD_CTX, "max32xxx protection_check <bank>");
+ return ERROR_OK;
+ }
+
+ retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
+ if (ERROR_OK != retval)
+ return retval;
+ info = bank->driver_priv;
+
+ /* Update the protection array */
+ retval = max32xxx_protect_check(bank);
+ if (ERROR_OK != retval) {
+ LOG_WARNING("Error updating the protection array");
+ return retval;
+ }
+
+ LOG_WARNING("s:<sector number> a:<address> p:<protection bit>");
+ for (i = 0; i < bank->num_sectors; i += 4) {
+ LOG_WARNING("s:%03d a:0x%06x p:%d | s:%03d a:0x%06x p:%d | s:%03d a:0x%06x p:%d | s:%03d a:0x%06x p:%d",
+ (i+0), (i+0)*info->sector_size, bank->sectors[(i+0)].is_protected,
+ (i+1), (i+1)*info->sector_size, bank->sectors[(i+1)].is_protected,
+ (i+2), (i+2)*info->sector_size, bank->sectors[(i+2)].is_protected,
+ (i+3), (i+3)*info->sector_size, bank->sectors[(i+3)].is_protected);
+ }
+
+ return ERROR_OK;
+}
+
+static const struct command_registration max32xxx_exec_command_handlers[] = {
+ {
+ .name = "mass_erase",
+ .handler = max32xxx_handle_mass_erase_command,
+ .mode = COMMAND_EXEC,
+ .usage = "bank_id",
+ .help = "mass erase flash",
+ },
+ {
+ .name = "protection_set",
+ .handler = max32xxx_handle_protection_set_command,
+ .mode = COMMAND_EXEC,
+ .usage = "bank_id addr size",
+ .help = "set flash protection for address range",
+ },
+ {
+ .name = "protection_clr",
+ .handler = max32xxx_handle_protection_clr_command,
+ .mode = COMMAND_EXEC,
+ .usage = "bank_id addr size",
+ .help = "clear flash protection for address range",
+ },
+ {
+ .name = "protection_check",
+ .handler = max32xxx_handle_protection_check_command,
+ .mode = COMMAND_EXEC,
+ .usage = "bank_id",
+ .help = "check flash protection",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+static const struct command_registration max32xxx_command_handlers[] = {
+ {
+ .name = "max32xxx",
+ .mode = COMMAND_EXEC,
+ .help = "max32xxx flash command group",
+ .chain = max32xxx_exec_command_handlers,
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+struct flash_driver max32xxx_flash = {
+ .name = "max32xxx",
+ .commands = max32xxx_command_handlers,
+ .flash_bank_command = max32xxx_flash_bank_command,
+ .erase = max32xxx_erase,
+ .protect = max32xxx_protect,
+ .write = max32xxx_write,
+ .read = default_flash_read,
+ .probe = max32xxx_probe,
+ .auto_probe = max32xxx_probe,
+ .erase_check = default_flash_blank_check,
+ .protect_check = max32xxx_protect_check,
+ .info = get_info,
+};
Code Review / openocd.git / blobdiff