flash: use correct device_id mask
[openocd.git] / src / flash / nor / stm32f2x.c
index 479df8af0077e571a18525f9e40fe8e9bafee3ca..b7e100960daf4463c9cedcf0e5efef6553456832 100644 (file)
@@ -234,8 +234,18 @@ static int stm32x_unlock_reg(struct target *target)
 {
        uint32_t ctrl;
 
+       /* first check if not already unlocked
+        * otherwise writing on STM32_FLASH_KEYR will fail
+        */
+       int retval = target_read_u32(target, STM32_FLASH_CR, &ctrl);
+       if (retval != ERROR_OK)
+               return retval;
+
+       if ((ctrl & FLASH_LOCK) == 0)
+               return ERROR_OK;
+
        /* unlock flash registers */
-       int retval = target_write_u32(target, STM32_FLASH_KEYR, KEY1);
+       retval = target_write_u32(target, STM32_FLASH_KEYR, KEY1);
        if (retval != ERROR_OK)
                return retval;
 
@@ -595,14 +605,14 @@ static int stm32x_probe(struct flash_bank *bank)
                flash_size_in_kb = 0xffff;
        }
 
-       if ((device_id & 0x7ff) == 0x411) {
+       if ((device_id & 0xfff) == 0x411) {
                /* check for early silicon */
                if (flash_size_in_kb == 0xffff) {
                        /* number of sectors may be incorrrect on early silicon */
                        LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 512k flash");
                        flash_size_in_kb = 512;
                }
-       } else if ((device_id & 0x7ff) == 0x413) {
+       } else if ((device_id & 0xfff) == 0x413) {
                /* check for early silicon */
                if (flash_size_in_kb == 0xffff) {
                        /* number of sectors may be incorrrect on early silicon */
@@ -671,7 +681,7 @@ static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size)
        if (retval != ERROR_OK)
                return retval;
 
-       if ((device_id & 0x7ff) == 0x411) {
+       if ((device_id & 0xfff) == 0x411) {
                printed = snprintf(buf, buf_size, "stm32f2x - Rev: ");
                buf += printed;
                buf_size -= printed;
@@ -697,7 +707,7 @@ static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size)
                                snprintf(buf, buf_size, "unknown");
                                break;
                }
-       } else if ((device_id & 0x7ff) == 0x413) {
+       } else if ((device_id & 0xfff) == 0x413) {
                printed = snprintf(buf, buf_size, "stm32f4x - Rev: ");
                buf += printed;
                buf_size -= printed;

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)