flash/nor/stm32l4x: Add revision 'X' and 'C' for STM32U575/585 devices

[openocd.git] / src / flash / nor / stm32l4x.c

diff --git a/src/flash/nor/stm32l4x.c b/src/flash/nor/stm32l4x.c
index a1108b5fd2a42f4b1c0802ca4dd549521333dc57..c67dbf75dc7bf2617fe441a518d933b4acf21101 100644 (file)
--- a/src/flash/nor/stm32l4x.c
+++ b/src/flash/nor/stm32l4x.c
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
+// SPDX-License-Identifier: GPL-2.0-or-later
 
 /***************************************************************************
  *   Copyright (C) 2015 by Uwe Bonnes                                      *
@@ -327,6 +327,7 @@ static const struct stm32l4_rev stm32g49_g4axx_revs[] = {
 
 static const struct stm32l4_rev stm32u57_u58xx_revs[] = {
        { 0x1000, "A" }, { 0x1001, "Z" }, { 0x1003, "Y" }, { 0x2000, "B" },
+       { 0x2001, "X" }, { 0x3000, "C" },
 };
 
 static const struct stm32l4_rev stm32wb1xx_revs[] = {
@@ -1740,7 +1741,8 @@ static int stm32l4_probe(struct flash_bank *bank)
 
        /* Set flash write alignment boundaries.
         * Ask the flash infrastructure to ensure required alignment */
-       bank->write_start_alignment = bank->write_end_alignment = stm32l4_info->data_width;
+       bank->write_start_alignment = stm32l4_info->data_width;
+       bank->write_end_alignment = stm32l4_info->data_width;
 
        /* Initialize the flash registers layout */
        if (part_info->flags & F_HAS_L5_FLASH_REGS)