flash/nor: use target_addr_t for flash bank base

[openocd.git] / src / flash / nor / stm32lx.c

diff --git a/src/flash/nor/stm32lx.c b/src/flash/nor/stm32lx.c
index 1be950fe0bf7a8dbcea57c846f05dbe1a95c1ae8..814df8f6faacbe749fdef9da0b78b9f735ed6d9e 100644 (file)
--- a/src/flash/nor/stm32lx.c
+++ b/src/flash/nor/stm32lx.c
@@ -816,8 +816,9 @@ static int stm32lx_probe(struct flash_bank *bank)
                        /* This is the first bank */
                        flash_size_in_kb = stm32lx_info->part_info.first_bank_size_kb;
                } else {
-                       LOG_WARNING("STM32L flash bank base address config is incorrect."
-                                   " 0x%" PRIx32 " but should rather be 0x%" PRIx32 " or 0x%" PRIx32,
+                       LOG_WARNING("STM32L flash bank base address config is incorrect. "
+                                       TARGET_ADDR_FMT " but should rather be 0x%" PRIx32
+                                       " or 0x%" PRIx32,
                                                bank->base, base_address, second_bank_base);
                        return ERROR_FAIL;
                }