Change return value on error.

[openocd.git] / src / flash / nor / str9x.c

diff --git a/src/flash/nor/str9x.c b/src/flash/nor/str9x.c
index cfe6a77709866742d622d0d4c2401c6637e570c0..5bea2068c523f95c30ff8bf3094e0bed7dc3882a 100644 (file)
--- a/src/flash/nor/str9x.c
+++ b/src/flash/nor/str9x.c
@@ -28,11 +28,45 @@
 #endif
 
 #include "imp.h"
-#include "str9x.h"
 #include <target/arm966e.h>
 #include <target/algorithm.h>
 
 
+/* Flash registers */
+
+#define FLASH_BBSR             0x54000000              /* Boot Bank Size Register                */
+#define FLASH_NBBSR            0x54000004              /* Non-Boot Bank Size Register            */
+#define FLASH_BBADR            0x5400000C              /* Boot Bank Base Address Register        */
+#define FLASH_NBBADR   0x54000010              /* Non-Boot Bank Base Address Register    */
+#define FLASH_CR               0x54000018              /* Control Register                       */
+#define FLASH_SR               0x5400001C              /* Status Register                        */
+#define FLASH_BCE5ADDR 0x54000020              /* BC Fifth Entry Target Address Register */
+
+
+struct str9x_flash_bank
+{
+       uint32_t *sector_bits;
+       int variant;
+       int bank1;
+       struct working_area *write_algorithm;
+};
+
+enum str9x_status_codes
+{
+       STR9X_CMD_SUCCESS = 0,
+       STR9X_INVALID_COMMAND = 1,
+       STR9X_SRC_ADDR_ERROR = 2,
+       STR9X_DST_ADDR_ERROR = 3,
+       STR9X_SRC_ADDR_NOT_MAPPED = 4,
+       STR9X_DST_ADDR_NOT_MAPPED = 5,
+       STR9X_COUNT_ERROR = 6,
+       STR9X_INVALID_SECTOR = 7,
+       STR9X_SECTOR_NOT_BLANK = 8,
+       STR9X_SECTOR_NOT_PREPARED = 9,
+       STR9X_COMPARE_ERROR = 10,
+       STR9X_BUSY = 11
+};
+
 static uint32_t bank1start = 0x00080000;
 
 static int str9x_build_block_list(struct flash_bank *bank)
@@ -124,8 +158,7 @@ FLASH_BANK_COMMAND_HANDLER(str9x_flash_bank_command)
 
        if (CMD_ARGC < 6)
        {
-               LOG_WARNING("incomplete flash_bank str9x configuration");
-               return ERROR_FLASH_BANK_INVALID;
+               return ERROR_COMMAND_SYNTAX_ERROR;
        }
 
        str9x_info = malloc(sizeof(struct str9x_flash_bank));
@@ -246,6 +279,9 @@ static int str9x_erase(struct flash_bank *bank, int first, int last)
                total_timeout = 1000;
        }
 
+       /* this is so the compiler can *know* */
+       assert(total_timeout > 0);
+
        for (i = first; i <= last; i++)
        {
                int retval;
@@ -364,6 +400,8 @@ static int str9x_write_block(struct flash_bank *bank,
        struct arm_algorithm armv4_5_info;
        int retval = ERROR_OK;
 
+       /* see contib/loaders/flash/str9x.s for src */
+
        static const uint32_t str9x_flash_write_code[] = {
                                        /* write:                               */
                0xe3c14003,     /*      bic     r4, r1, #3              */
@@ -526,7 +564,7 @@ static int str9x_write(struct flash_bank *bank,
                        }
                        else if (retval == ERROR_FLASH_OPERATION_FAILED)
                        {
-                               LOG_ERROR("flash writing failed with error code: 0x%x", retval);
+                               LOG_ERROR("flash writing failed");
                                return ERROR_FLASH_OPERATION_FAILED;
                        }
                }
@@ -645,7 +683,6 @@ static int get_str9x_info(struct flash_bank *bank, char *buf, int buf_size)
 
 COMMAND_HANDLER(str9x_handle_flash_config_command)
 {
-       struct str9x_flash_bank *str9x_info;
        struct target *target = NULL;
 
        if (CMD_ARGC < 5)
@@ -664,8 +701,6 @@ COMMAND_HANDLER(str9x_handle_flash_config_command)
        COMMAND_PARSE_NUMBER(u32, CMD_ARGV[3], bbadr);
        COMMAND_PARSE_NUMBER(u32, CMD_ARGV[4], nbbadr);
 
-       str9x_info = bank->driver_priv;
-
        target = bank->target;
 
        if (bank->target->state != TARGET_HALTED)