minidriver: fix inline capability of minidriver
[openocd.git] / src / jtag / core.c
index 1841dde9f4c311a3e5967b3511cdd063e798b41c..77cf48ac284abd4802a988acabf8ea8af28843b9 100644 (file)
@@ -32,7 +32,6 @@
 #endif
 
 #include "jtag.h"
-#include "minidriver.h"
 #include "interface.h"
 
 #ifdef HAVE_STRINGS_H
@@ -244,17 +243,6 @@ struct jtag_tap *jtag_tap_by_string(const char *s)
        return t;
 }
 
-struct jtag_tap *jtag_tap_by_jim_obj(Jim_Interp *interp, Jim_Obj *o)
-{
-       const char *cp = Jim_GetString(o, NULL);
-       struct jtag_tap *t = cp ? jtag_tap_by_string(cp) : NULL;
-       if (NULL == cp)
-               cp = "(unknown)";
-       if (NULL == t)
-               Jim_SetResult_sprintf(interp, "Tap '%s' could not be found", cp);
-       return t;
-}
-
 struct jtag_tap* jtag_tap_next_enabled(struct jtag_tap* p)
 {
        p = p ? p->next_tap : jtag_all_taps();
@@ -409,18 +397,6 @@ void jtag_add_plain_ir_scan(int in_num_fields, const struct scan_field *in_field
        jtag_set_error(retval);
 }
 
-void jtag_add_callback(jtag_callback1_t f, jtag_callback_data_t data0)
-{
-       interface_jtag_add_callback(f, data0);
-}
-
-void jtag_add_callback4(jtag_callback_t f, jtag_callback_data_t data0,
-               jtag_callback_data_t data1, jtag_callback_data_t data2,
-               jtag_callback_data_t data3)
-{
-       interface_jtag_add_callback4(f, data0, data1, data2, data3);
-}
-
 static int jtag_check_value_inner(uint8_t *captured, uint8_t *in_check_value,
                uint8_t *in_check_mask, int num_bits);
 
@@ -502,20 +478,6 @@ void jtag_add_plain_dr_scan(int in_num_fields, const struct scan_field *in_field
        jtag_set_error(retval);
 }
 
-void jtag_add_dr_out(struct jtag_tap* tap,
-               int num_fields, const int* num_bits, const uint32_t* value,
-               tap_state_t end_state)
-{
-       assert(end_state != TAP_RESET);
-       assert(end_state != TAP_INVALID);
-
-       cmd_queue_cur_state = end_state;
-
-       interface_jtag_add_dr_out(tap,
-                       num_fields, num_bits, value,
-                       end_state);
-}
-
 void jtag_add_tlr(void)
 {
        jtag_prelude(TAP_RESET);
@@ -586,7 +548,7 @@ int jtag_add_statemove(tap_state_t goal_state)
                unsigned tms_bits  = tap_get_tms_path(cur_state, goal_state);
                unsigned tms_count = tap_get_tms_path_len(cur_state, goal_state);
                tap_state_t moves[8];
-               assert(tms_count < DIM(moves));
+               assert(tms_count < ARRAY_SIZE(moves));
 
                for (unsigned i = 0; i < tms_count; i++, tms_bits >>= 1)
                {
@@ -773,8 +735,7 @@ static int jtag_check_value_inner(uint8_t *captured, uint8_t *in_check_value,
                uint8_t *in_check_mask, int num_bits)
 {
        int retval = ERROR_OK;
-
-       int compare_failed = 0;
+       int compare_failed;
 
        if (in_check_mask)
                compare_failed = buf_cmp_mask(captured, in_check_value, in_check_mask, num_bits);
@@ -1064,7 +1025,7 @@ static int jtag_examine_chain(void)
                if ((idcode & 1) == 0)
                {
                        /* Zero for LSB indicates a device in bypass */
-                       LOG_WARNING("TAP %s does not have IDCODE",
+                       LOG_INFO("TAP %s does not have IDCODE",
                                        tap->dotted_name);
                        idcode = 0;
                        tap->hasidcode = false;
@@ -1193,7 +1154,7 @@ static int jtag_validate_ircapture(void)
        /* increase length to add 2 bit sentinel after scan */
        total_ir_length += 2;
 
-       ir_test = malloc(CEIL(total_ir_length, 8));
+       ir_test = malloc(DIV_ROUND_UP(total_ir_length, 8));
        if (ir_test == NULL)
                return ERROR_FAIL;
 
@@ -1224,7 +1185,14 @@ static int jtag_validate_ircapture(void)
                /* If we're autoprobing, guess IR lengths.  They must be at
                 * least two bits.  Guessing will fail if (a) any TAP does
                 * not conform to the JTAG spec; or (b) when the upper bits
-                * captured from some conforming TAP are nonzero.
+                * captured from some conforming TAP are nonzero.  Or if
+                * (c) an IR length is longer than 32 bits -- which is only
+                * an implementation limit, which could someday be raised.
+                *
+                * REVISIT optimization:  if there's a *single* TAP we can
+                * lift restrictions (a) and (b) by scanning a recognizable
+                * pattern before the all-ones BYPASS.  Check for where the
+                * pattern starts in the result, instead of an 0...01 value.
                 *
                 * REVISIT alternative approach: escape to some tcl code
                 * which could provide more knowledge, based on IDCODE; and
@@ -1233,7 +1201,8 @@ static int jtag_validate_ircapture(void)
                if (tap->ir_length == 0) {
                        tap->ir_length = 2;
                        while ((val = buf_get_u32(ir_test, chain_pos,
-                                               tap->ir_length + 1)) == 1) {
+                                               tap->ir_length + 1)) == 1
+                                       && tap->ir_length <= 32) {
                                tap->ir_length++;
                        }
                        LOG_WARNING("AUTO %s - use \"... -irlen %d\"",
@@ -1293,7 +1262,7 @@ void jtag_tap_init(struct jtag_tap *tap)
 
        /* if we're autoprobing, cope with potentially huge ir_length */
        ir_len_bits = tap->ir_length ? : JTAG_IRLEN_MAX;
-       ir_len_bytes = CEIL(ir_len_bits, 8);
+       ir_len_bytes = DIV_ROUND_UP(ir_len_bits, 8);
 
        tap->expected = calloc(1, ir_len_bytes);
        tap->expected_mask = calloc(1, ir_len_bytes);
@@ -1527,7 +1496,7 @@ int jtag_init(struct command_context *cmd_ctx)
        if ((retval = jtag_execute_queue()) != ERROR_OK)
                return retval;
 
-       if (Jim_Eval_Named(interp, "jtag_init", __FILE__, __LINE__) != JIM_OK)
+       if (Jim_Eval_Named(cmd_ctx->interp, "jtag_init", __FILE__, __LINE__) != JIM_OK)
                return ERROR_FAIL;
 
        return ERROR_OK;

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)