+// SPDX-License-Identifier: GPL-2.0-or-later
+
/***************************************************************************
* Copyright (C) 2010 by Michal Demin *
* based on usbprog.c and arm-jtag-ew.c *
* Several fixes by R. Diez in 2013. *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
#ifdef HAVE_CONFIG_H
#undef DEBUG_SERIAL
/*#define DEBUG_SERIAL */
-static int buspirate_execute_queue(void);
+static int buspirate_execute_queue(struct jtag_command *cmd_queue);
static int buspirate_init(void);
static int buspirate_quit(void);
static int buspirate_reset(int trst, int srst);
static void buspirate_serial_close(int fd);
static void buspirate_print_buffer(uint8_t *buf, int size);
-static int buspirate_execute_queue(void)
+static int buspirate_execute_queue(struct jtag_command *cmd_queue)
{
/* currently processed command */
- struct jtag_command *cmd = jtag_command_queue;
+ struct jtag_command *cmd = cmd_queue;
int scan_size;
enum scan_type type;
uint8_t *buffer;
}
-static const struct command_registration buspirate_command_handlers[] = {
+static const struct command_registration buspirate_subcommand_handlers[] = {
{
- .name = "buspirate_adc",
+ .name = "adc",
.handler = &buspirate_handle_adc_command,
.mode = COMMAND_EXEC,
.help = "reads voltages on adc pins",
.usage = "",
},
{
- .name = "buspirate_vreg",
+ .name = "vreg",
.usage = "<1|0>",
.handler = &buspirate_handle_vreg_command,
.mode = COMMAND_CONFIG,
.help = "changes the state of voltage regulators",
},
{
- .name = "buspirate_pullup",
+ .name = "pullup",
.usage = "<1|0>",
.handler = &buspirate_handle_pullup_command,
.mode = COMMAND_CONFIG,
.help = "changes the state of pullup",
},
{
- .name = "buspirate_led",
+ .name = "led",
.usage = "<1|0>",
.handler = &buspirate_handle_led_command,
.mode = COMMAND_EXEC,
.help = "changes the state of led",
},
{
- .name = "buspirate_speed",
+ .name = "speed",
.usage = "<normal|fast>",
.handler = &buspirate_handle_speed_command,
.mode = COMMAND_CONFIG,
.help = "speed of the interface",
},
{
- .name = "buspirate_mode",
+ .name = "mode",
.usage = "<normal|open-drain>",
.handler = &buspirate_handle_mode_command,
.mode = COMMAND_CONFIG,
.help = "pin mode of the interface",
},
{
- .name = "buspirate_port",
+ .name = "port",
.usage = "/dev/ttyUSB0",
.handler = &buspirate_handle_port_command,
.mode = COMMAND_CONFIG,
COMMAND_REGISTRATION_DONE
};
+static const struct command_registration buspirate_command_handlers[] = {
+ {
+ .name = "buspirate",
+ .mode = COMMAND_ANY,
+ .help = "perform buspirate management",
+ .chain = buspirate_subcommand_handlers,
+ .usage = "",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
static const struct swd_driver buspirate_swd = {
.init = buspirate_swd_init,
.switch_seq = buspirate_swd_switch_seq,