jtag/drivers/ftdi: require defining SWD_EN signal for SWD mode

[openocd.git] / src / jtag / drivers / ftdi.c

diff --git a/src/jtag/drivers/ftdi.c b/src/jtag/drivers/ftdi.c
index 292a44107417075a74c646a231c88cb00e9bb96a..b65dd2ac444f66a265037597e3080fbe3bec1a9f 100644 (file)
--- a/src/jtag/drivers/ftdi.c
+++ b/src/jtag/drivers/ftdi.c
@@ -127,8 +127,6 @@ static uint16_t output;
 static uint16_t direction;
 static uint16_t jtag_output_init;
 static uint16_t jtag_direction_init;
-static uint16_t swd_output_init;
-static uint16_t swd_direction_init;
 
 static int ftdi_swd_switch_seq(struct adiv5_dap *dap, enum swd_special_seq seq);
 
@@ -634,8 +632,19 @@ static int ftdi_initialize(void)
        if (!mpsse_ctx)
                return ERROR_JTAG_INIT_FAILED;
 
-       output = swd_mode ? swd_output_init : jtag_output_init;
-       direction = swd_mode ? swd_direction_init : jtag_direction_init;
+       output = jtag_output_init;
+       direction = jtag_direction_init;
+
+       if (swd_mode) {
+               struct signal *sig = find_signal_by_name("SWD_EN");
+               if (!sig) {
+                       LOG_ERROR("SWD mode is active but SWD_EN signal is not defined");
+                       return ERROR_JTAG_INIT_FAILED;
+               }
+               /* A dummy SWD_EN would have zero mask */
+               if (sig->data_mask)
+                       ftdi_set_signal(sig, '1');
+       }
 
        mpsse_set_data_bits_low_byte(mpsse_ctx, output & 0xff, direction & 0xff);
        mpsse_set_data_bits_high_byte(mpsse_ctx, output >> 8, direction >> 8);
@@ -707,17 +716,6 @@ COMMAND_HANDLER(ftdi_handle_layout_init_command)
        return ERROR_OK;
 }
 
-COMMAND_HANDLER(ftdi_handle_layout_init_swd_command)
-{
-       if (CMD_ARGC != 2)
-               return ERROR_COMMAND_SYNTAX_ERROR;
-
-       COMMAND_PARSE_NUMBER(u16, CMD_ARGV[0], swd_output_init);
-       COMMAND_PARSE_NUMBER(u16, CMD_ARGV[1], swd_direction_init);
-
-       return ERROR_OK;
-}
-
 COMMAND_HANDLER(ftdi_handle_layout_signal_command)
 {
        if (CMD_ARGC < 1)
@@ -863,17 +861,7 @@ static const struct command_registration ftdi_command_handlers[] = {
                .handler = &ftdi_handle_layout_init_command,
                .mode = COMMAND_CONFIG,
                .help = "initialize the FTDI GPIO signals used "
-                       "to control output-enables and reset signals"
-                       "when JTAG mode is selected",
-               .usage = "data direction",
-       },
-       {
-               .name = "ftdi_layout_init_swd",
-               .handler = &ftdi_handle_layout_init_swd_command,
-               .mode = COMMAND_CONFIG,
-               .help = "initialize the FTDI GPIO signals used "
-                       "to control output-enables and reset signals"
-                       "when SWD mode is selected",
+                       "to control output-enables and reset signals",
                .usage = "data direction",
        },
        {