int jtag;
/** */
int swim;
- /** highest supported jtag api version */
- enum stlink_jtag_api_version jtag_api_max;
+ /** jtag api version supported */
+ enum stlink_jtag_api_version jtag_api;
/** one bit for each feature supported. See macros STLINK_F_* */
uint32_t flags;
};
uint16_t vid;
/** */
uint16_t pid;
- /** this is the currently used jtag api */
- enum stlink_jtag_api_version jtag_api;
/** */
struct {
/** whether SWO tracing is enabled or not */
#define STLINK_SWIM_READMEM 0x0b
#define STLINK_SWIM_READBUF 0x0c
-#define STLINK_DEBUG_ENTER_JTAG 0x00
#define STLINK_DEBUG_GETSTATUS 0x01
#define STLINK_DEBUG_FORCEDEBUG 0x02
#define STLINK_DEBUG_APIV1_RESETSYS 0x03
#define STLINK_DEBUG_APIV1_WRITEDEBUGREG 0x0f
#define STLINK_DEBUG_APIV1_SETWATCHPOINT 0x10
-#define STLINK_DEBUG_ENTER_JTAG 0x00
-#define STLINK_DEBUG_ENTER_SWD 0xa3
+#define STLINK_DEBUG_ENTER_JTAG_RESET 0x00
+#define STLINK_DEBUG_ENTER_SWD_NO_RESET 0xa3
+#define STLINK_DEBUG_ENTER_JTAG_NO_RESET 0xa4
#define STLINK_DEBUG_APIV1_ENTER 0x20
#define STLINK_DEBUG_EXIT 0x21
#define STLINK_DEBUG_APIV2_GETLASTRWSTATUS 0x3B
#define STLINK_DEBUG_APIV2_DRIVE_NRST 0x3C
+#define STLINK_DEBUG_APIV2_GETLASTRWSTATUS2 0x3E
+
#define STLINK_DEBUG_APIV2_START_TRACE_RX 0x40
#define STLINK_DEBUG_APIV2_STOP_TRACE_RX 0x41
#define STLINK_DEBUG_APIV2_GET_TRACE_NB 0x42
#define STLINK_F_HAS_TRACE (1UL << 0)
#define STLINK_F_HAS_SWD_SET_FREQ (1UL << 1)
#define STLINK_F_HAS_JTAG_SET_FREQ (1UL << 2)
+#define STLINK_F_HAS_MEM_16BIT (1UL << 3)
+#define STLINK_F_HAS_GETLASTRWSTATUS2 (1UL << 4)
/* aliases */
#define STLINK_F_HAS_TARGET_VOLT STLINK_F_HAS_TRACE
}
/* TODO: no error checking yet on api V1 */
- if (h->jtag_api == STLINK_JTAG_API_V1)
+ if (h->version.jtag_api == STLINK_JTAG_API_V1)
h->databuf[0] = STLINK_DEBUG_ERR_OK;
switch (h->databuf[0]) {
{
int res;
uint32_t flags;
- uint16_t v;
+ uint16_t version;
+ uint8_t v, x, y, jtag, swim, msd;
+ char v_str[4 * (1 + 3) + 1]; /* VvJjMmSs */
+ char *p;
struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
if (res != ERROR_OK)
return res;
- v = (h->databuf[0] << 8) | h->databuf[1];
+ version = be_to_h_u16(h->databuf);
+ v = (version >> 12) & 0x0f;
+ x = (version >> 6) & 0x3f;
+ y = version & 0x3f;
+
+ h->vid = le_to_h_u16(h->databuf + 2);
+ h->pid = le_to_h_u16(h->databuf + 4);
+
+ switch (h->pid) {
+ case STLINK_V2_1_PID:
+ case STLINK_V2_1_NO_MSD_PID:
+ /* JxMy : STM32 V2.1 - JTAG/SWD only */
+ jtag = x;
+ msd = y;
+ swim = 0;
+ break;
+ default:
+ jtag = x;
+ swim = y;
+ msd = 0;
+ break;
+ }
- h->version.stlink = (v >> 12) & 0x0f;
- h->version.jtag = (v >> 6) & 0x3f;
- h->version.swim = v & 0x3f;
- h->vid = buf_get_u32(h->databuf, 16, 16);
- h->pid = buf_get_u32(h->databuf, 32, 16);
+ h->version.stlink = v;
+ h->version.jtag = jtag;
+ h->version.swim = swim;
flags = 0;
switch (h->version.stlink) {
case 1:
/* ST-LINK/V1 from J11 switch to api-v2 (and support SWD) */
if (h->version.jtag >= 11)
- h->version.jtag_api_max = STLINK_JTAG_API_V2;
+ h->version.jtag_api = STLINK_JTAG_API_V2;
else
- h->version.jtag_api_max = STLINK_JTAG_API_V1;
+ h->version.jtag_api = STLINK_JTAG_API_V1;
break;
case 2:
/* all ST-LINK/V2 and ST-Link/V2.1 use api-v2 */
- h->version.jtag_api_max = STLINK_JTAG_API_V2;
+ h->version.jtag_api = STLINK_JTAG_API_V2;
/* API for trace from J13 */
/* API for target voltage from J13 */
if (h->version.jtag >= 13)
flags |= STLINK_F_HAS_TRACE;
+ /* preferred API to get last R/W status from J15 */
+ if (h->version.jtag >= 15)
+ flags |= STLINK_F_HAS_GETLASTRWSTATUS2;
+
/* API to set SWD frequency from J22 */
if (h->version.jtag >= 22)
flags |= STLINK_F_HAS_SWD_SET_FREQ;
if (h->version.jtag >= 24)
flags |= STLINK_F_HAS_JTAG_SET_FREQ;
+ /* API to read/write memory at 16 bit from J26 */
+ if (h->version.jtag >= 26)
+ flags |= STLINK_F_HAS_MEM_16BIT;
+
break;
default:
break;
}
h->version.flags = flags;
- LOG_INFO("STLINK v%d JTAG v%d API v%d SWIM v%d VID 0x%04X PID 0x%04X",
- h->version.stlink,
- h->version.jtag,
- (h->version.jtag_api_max == STLINK_JTAG_API_V1) ? 1 : 2,
- h->version.swim,
+ p = v_str;
+ p += sprintf(p, "V%d", v);
+ if (jtag || !msd)
+ p += sprintf(p, "J%d", jtag);
+ if (msd)
+ p += sprintf(p, "M%d", msd);
+ if (swim || !msd)
+ p += sprintf(p, "S%d", swim);
+
+ LOG_INFO("STLINK %s (API v%d) VID:PID %04X:%04X",
+ v_str,
+ h->version.jtag_api,
h->vid,
h->pid);
* status
* TODO: we need the test on api V1 too
*/
- if (h->jtag_api == STLINK_JTAG_API_V2)
+ if (h->version.jtag_api == STLINK_JTAG_API_V2)
rx_size = 2;
stlink_usb_init_buffer(handle, h->rx_ep, rx_size);
switch (type) {
case STLINK_MODE_DEBUG_JTAG:
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
- if (h->jtag_api == STLINK_JTAG_API_V1)
+ if (h->version.jtag_api == STLINK_JTAG_API_V1)
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_ENTER;
else
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_ENTER;
- h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_ENTER_JTAG;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_ENTER_JTAG_NO_RESET;
break;
case STLINK_MODE_DEBUG_SWD:
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
- if (h->jtag_api == STLINK_JTAG_API_V1)
+ if (h->version.jtag_api == STLINK_JTAG_API_V1)
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_ENTER;
else
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_ENTER;
- h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_ENTER_SWD;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_ENTER_SWD_NO_RESET;
break;
case STLINK_MODE_DEBUG_SWIM:
h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND;
stlink_usb_init_buffer(handle, h->rx_ep, 2);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
- if (h->jtag_api == STLINK_JTAG_API_V1)
+ if (h->version.jtag_api == STLINK_JTAG_API_V1)
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_WRITEDEBUGREG;
else
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_WRITEDEBUGREG;
h->reconnect_pending = false;
}
- if (h->jtag_api == STLINK_JTAG_API_V2) {
+ if (h->version.jtag_api == STLINK_JTAG_API_V2) {
res = stlink_usb_v2_get_status(handle);
if (res == TARGET_UNKNOWN)
h->reconnect_pending = true;
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
- if (h->jtag_api == STLINK_JTAG_API_V1)
+ if (h->version.jtag_api == STLINK_JTAG_API_V1)
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_RESETSYS;
else
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_RESETSYS;
assert(handle != NULL);
- if (h->jtag_api == STLINK_JTAG_API_V2) {
+ if (h->version.jtag_api == STLINK_JTAG_API_V2) {
res = stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_DEBUGEN);
return res;
assert(handle != NULL);
- if (h->jtag_api == STLINK_JTAG_API_V2) {
+ if (h->version.jtag_api == STLINK_JTAG_API_V2) {
res = stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_DEBUGEN);
return res;
assert(handle != NULL);
- if (h->jtag_api == STLINK_JTAG_API_V2) {
+ if (h->version.jtag_api == STLINK_JTAG_API_V2) {
/* TODO: this emulates the v1 api, it should really use a similar auto mask isr
* that the Cortex-M3 currently does. */
stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_MASKINTS|C_DEBUGEN);
stlink_usb_init_buffer(handle, h->rx_ep, 84);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
- if (h->jtag_api == STLINK_JTAG_API_V1)
+ if (h->version.jtag_api == STLINK_JTAG_API_V1)
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_READALLREGS;
else
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READALLREGS;
assert(handle != NULL);
- stlink_usb_init_buffer(handle, h->rx_ep, h->jtag_api == STLINK_JTAG_API_V1 ? 4 : 8);
+ stlink_usb_init_buffer(handle, h->rx_ep, h->version.jtag_api == STLINK_JTAG_API_V1 ? 4 : 8);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
- if (h->jtag_api == STLINK_JTAG_API_V1)
+ if (h->version.jtag_api == STLINK_JTAG_API_V1)
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_READREG;
else
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READREG;
h->cmdbuf[h->cmdidx++] = num;
- if (h->jtag_api == STLINK_JTAG_API_V1) {
+ if (h->version.jtag_api == STLINK_JTAG_API_V1) {
res = stlink_usb_xfer(handle, h->databuf, 4);
if (res != ERROR_OK)
return res;
stlink_usb_init_buffer(handle, h->rx_ep, 2);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
- if (h->jtag_api == STLINK_JTAG_API_V1)
+ if (h->version.jtag_api == STLINK_JTAG_API_V1)
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_WRITEREG;
else
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_WRITEREG;
assert(handle != NULL);
- if (h->jtag_api == STLINK_JTAG_API_V1)
+ if (h->version.jtag_api == STLINK_JTAG_API_V1)
return ERROR_OK;
stlink_usb_init_buffer(handle, h->rx_ep, 2);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
- h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GETLASTRWSTATUS;
+ if (h->version.flags & STLINK_F_HAS_GETLASTRWSTATUS2) {
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GETLASTRWSTATUS2;
- res = stlink_usb_xfer(handle, h->databuf, 2);
+ res = stlink_usb_xfer(handle, h->databuf, 12);
+ } else {
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GETLASTRWSTATUS;
+
+ res = stlink_usb_xfer(handle, h->databuf, 2);
+ }
if (res != ERROR_OK)
return res;
assert(handle != NULL);
- /* only supported by stlink/v2 and for firmware >= 26 */
- if (h->jtag_api == STLINK_JTAG_API_V1 ||
- (h->jtag_api == STLINK_JTAG_API_V2 && h->version.jtag < 26))
+ if (!(h->version.flags & STLINK_F_HAS_MEM_16BIT))
return ERROR_COMMAND_NOTFOUND;
/* data must be a multiple of 2 and half-word aligned */
assert(handle != NULL);
- /* only supported by stlink/v2 and for firmware >= 26 */
- if (h->jtag_api == STLINK_JTAG_API_V1 ||
- (h->jtag_api == STLINK_JTAG_API_V2 && h->version.jtag < 26))
+ if (!(h->version.flags & STLINK_F_HAS_MEM_16BIT))
return ERROR_COMMAND_NOTFOUND;
/* data must be a multiple of 2 and half-word aligned */
count *= size;
/* switch to 8 bit if stlink does not support 16 bit memory read */
- if (size == 2 && (h->jtag_api == STLINK_JTAG_API_V1 ||
- (h->jtag_api == STLINK_JTAG_API_V2 && h->version.jtag < 26)))
+ if (size == 2 && !(h->version.flags & STLINK_F_HAS_MEM_16BIT))
size = 1;
while (count) {
count *= size;
/* switch to 8 bit if stlink does not support 16 bit memory read */
- if (size == 2 && (h->jtag_api == STLINK_JTAG_API_V1 ||
- (h->jtag_api == STLINK_JTAG_API_V2 && h->version.jtag < 26)))
+ if (size == 2 && !(h->version.flags & STLINK_F_HAS_MEM_16BIT))
size = 1;
while (count) {
{
int err, retry_count = 1;
struct stlink_usb_handle_s *h;
- enum stlink_jtag_api_version api;
LOG_DEBUG("stlink_usb_open");
switch (h->transport) {
case HL_TRANSPORT_SWD:
- if (h->version.jtag_api_max == STLINK_JTAG_API_V1)
+ if (h->version.jtag_api == STLINK_JTAG_API_V1)
err = ERROR_FAIL;
/* fall-through */
case HL_TRANSPORT_JTAG:
goto error_open;
}
- api = h->version.jtag_api_max;
-
- LOG_INFO("using stlink api v%d", api);
-
- /* set the used jtag api, this will default to the newest supported version */
- h->jtag_api = api;
-
/* initialize the debug hardware */
err = stlink_usb_init_mode(h, param->connect_under_reset);