#include "libusb_common.h"
+#ifdef HAVE_LIBUSB1
+#define USE_LIBUSB_ASYNCIO
+#endif
+
#define ENDPOINT_IN 0x80
#define ENDPOINT_OUT 0x00
#define STLINK_SWD_AP_FAULT 0x11
#define STLINK_SWD_AP_ERROR 0x12
#define STLINK_SWD_AP_PARITY_ERROR 0x13
+#define STLINK_JTAG_GET_IDCODE_ERROR 0x09
#define STLINK_JTAG_WRITE_ERROR 0x0c
#define STLINK_JTAG_WRITE_VERIF_ERROR 0x0d
#define STLINK_SWD_DP_WAIT 0x14
#define STLINK_SWD_AP_STICKY_ERROR 0x19
#define STLINK_SWD_AP_STICKYORUN_ERROR 0x1a
+#define STLINK_BAD_AP_ERROR 0x1d
+
#define STLINK_CORE_RUNNING 0x80
#define STLINK_CORE_HALTED 0x81
#define STLINK_CORE_STAT_UNKNOWN -1
return STLINK_MAX_RW8;
}
+
+
+#ifdef USE_LIBUSB_ASYNCIO
+
+static LIBUSB_CALL void sync_transfer_cb(struct libusb_transfer *transfer)
+{
+ int *completed = transfer->user_data;
+ *completed = 1;
+ /* caller interprets result and frees transfer */
+}
+
+
+static void sync_transfer_wait_for_completion(struct libusb_transfer *transfer)
+{
+ int r, *completed = transfer->user_data;
+
+ /* Assuming a single libusb context exists. There no existing interface into this
+ * module to pass a libusb context.
+ */
+ struct libusb_context *ctx = NULL;
+
+ while (!*completed) {
+ r = libusb_handle_events_completed(ctx, completed);
+ if (r < 0) {
+ if (r == LIBUSB_ERROR_INTERRUPTED)
+ continue;
+ libusb_cancel_transfer(transfer);
+ continue;
+ }
+ }
+}
+
+
+static int transfer_error_status(const struct libusb_transfer *transfer)
+{
+ int r = 0;
+
+ switch (transfer->status) {
+ case LIBUSB_TRANSFER_COMPLETED:
+ r = 0;
+ break;
+ case LIBUSB_TRANSFER_TIMED_OUT:
+ r = LIBUSB_ERROR_TIMEOUT;
+ break;
+ case LIBUSB_TRANSFER_STALL:
+ r = LIBUSB_ERROR_PIPE;
+ break;
+ case LIBUSB_TRANSFER_OVERFLOW:
+ r = LIBUSB_ERROR_OVERFLOW;
+ break;
+ case LIBUSB_TRANSFER_NO_DEVICE:
+ r = LIBUSB_ERROR_NO_DEVICE;
+ break;
+ case LIBUSB_TRANSFER_ERROR:
+ case LIBUSB_TRANSFER_CANCELLED:
+ r = LIBUSB_ERROR_IO;
+ break;
+ default:
+ r = LIBUSB_ERROR_OTHER;
+ break;
+ }
+
+ return r;
+}
+
+struct jtag_xfer {
+ int ep;
+ uint8_t *buf;
+ size_t size;
+ /* Internal */
+ int retval;
+ int completed;
+ size_t transfer_size;
+ struct libusb_transfer *transfer;
+};
+
+static int jtag_libusb_bulk_transfer_n(
+ jtag_libusb_device_handle * dev_handle,
+ struct jtag_xfer *transfers,
+ size_t n_transfers,
+ int timeout)
+{
+ int retval = 0;
+ int returnval = ERROR_OK;
+
+
+ for (size_t i = 0; i < n_transfers; ++i) {
+ transfers[i].retval = 0;
+ transfers[i].completed = 0;
+ transfers[i].transfer_size = 0;
+ transfers[i].transfer = libusb_alloc_transfer(0);
+
+ if (transfers[i].transfer == NULL) {
+ for (size_t j = 0; j < i; ++j)
+ libusb_free_transfer(transfers[j].transfer);
+
+ LOG_DEBUG("ERROR, failed to alloc usb transfers");
+ for (size_t k = 0; k < n_transfers; ++k)
+ transfers[k].retval = LIBUSB_ERROR_NO_MEM;
+ return ERROR_FAIL;
+ }
+ }
+
+ for (size_t i = 0; i < n_transfers; ++i) {
+ libusb_fill_bulk_transfer(
+ transfers[i].transfer,
+ dev_handle,
+ transfers[i].ep, transfers[i].buf, transfers[i].size,
+ sync_transfer_cb, &transfers[i].completed, timeout);
+ transfers[i].transfer->type = LIBUSB_TRANSFER_TYPE_BULK;
+
+ retval = libusb_submit_transfer(transfers[i].transfer);
+ if (retval < 0) {
+ LOG_DEBUG("ERROR, failed to submit transfer %zu, error %d", i, retval);
+
+ /* Probably no point continuing to submit transfers once a submission fails.
+ * As a result, tag all remaining transfers as errors.
+ */
+ for (size_t j = i; j < n_transfers; ++j)
+ transfers[j].retval = retval;
+
+ returnval = ERROR_FAIL;
+ break;
+ }
+ }
+
+ /* Wait for every submitted USB transfer to complete.
+ */
+ for (size_t i = 0; i < n_transfers; ++i) {
+ if (transfers[i].retval == 0) {
+ sync_transfer_wait_for_completion(transfers[i].transfer);
+
+ retval = transfer_error_status(transfers[i].transfer);
+ if (retval) {
+ returnval = ERROR_FAIL;
+ transfers[i].retval = retval;
+ LOG_DEBUG("ERROR, transfer %zu failed, error %d", i, retval);
+ } else {
+ /* Assuming actual_length is only valid if there is no transfer error.
+ */
+ transfers[i].transfer_size = transfers[i].transfer->actual_length;
+ }
+ }
+
+ libusb_free_transfer(transfers[i].transfer);
+ transfers[i].transfer = NULL;
+ }
+
+ return returnval;
+}
+
+#endif
+
+
/** */
static int stlink_usb_xfer_v1_get_status(void *handle)
{
return ERROR_OK;
}
-/** */
+#ifdef USE_LIBUSB_ASYNCIO
+static int stlink_usb_xfer_rw(void *handle, int cmdsize, const uint8_t *buf, int size)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle != NULL);
+
+ size_t n_transfers = 0;
+ struct jtag_xfer transfers[2];
+
+ memset(transfers, 0, sizeof(transfers));
+
+ transfers[0].ep = h->tx_ep;
+ transfers[0].buf = h->cmdbuf;
+ transfers[0].size = cmdsize;
+
+ ++n_transfers;
+
+ if (h->direction == h->tx_ep && size) {
+ transfers[1].ep = h->tx_ep;
+ transfers[1].buf = (uint8_t *)buf;
+ transfers[1].size = size;
+
+ ++n_transfers;
+ } else if (h->direction == h->rx_ep && size) {
+ transfers[1].ep = h->rx_ep;
+ transfers[1].buf = (uint8_t *)buf;
+ transfers[1].size = size;
+
+ ++n_transfers;
+ }
+
+ return jtag_libusb_bulk_transfer_n(
+ h->fd,
+ transfers,
+ n_transfers,
+ STLINK_WRITE_TIMEOUT);
+}
+#else
static int stlink_usb_xfer_rw(void *handle, int cmdsize, const uint8_t *buf, int size)
{
struct stlink_usb_handle_s *h = handle;
return ERROR_OK;
}
+#endif
/** */
static int stlink_usb_xfer_v1_get_sense(void *handle)
case STLINK_SWD_DP_WAIT:
LOG_DEBUG("wait status SWD_DP_WAIT (0x%x)", STLINK_SWD_DP_WAIT);
return ERROR_WAIT;
+ case STLINK_JTAG_GET_IDCODE_ERROR:
+ LOG_DEBUG("STLINK_JTAG_GET_IDCODE_ERROR");
+ return ERROR_FAIL;
case STLINK_JTAG_WRITE_ERROR:
LOG_DEBUG("Write error");
return ERROR_FAIL;
case STLINK_SWD_AP_STICKYORUN_ERROR:
LOG_DEBUG("STLINK_SWD_AP_STICKYORUN_ERROR");
return ERROR_FAIL;
+ case STLINK_BAD_AP_ERROR:
+ LOG_DEBUG("STLINK_BAD_AP_ERROR");
+ return ERROR_FAIL;
default:
LOG_DEBUG("unknown/unexpected STLINK status code 0x%x", h->databuf[0]);
return ERROR_FAIL;
res = stlink_usb_error_check(handle);
if (res == ERROR_WAIT && retries < MAX_WAIT_RETRIES) {
- usleep((1<<retries++) * 1000);
+ useconds_t delay_us = (1<<retries++) * 1000;
+ LOG_DEBUG("stlink_cmd_allow_retry ERROR_WAIT, retry %d, delaying %u microseconds", retries, delay_us);
+ usleep(delay_us);
continue;
}
return res;
if (bridge)
p += sprintf(p, "B%d", bridge);
if (swim || !msd)
- p += sprintf(p, "S%d", swim);
+ sprintf(p, "S%d", swim);
LOG_INFO("STLINK %s (API v%d) VID:PID %04X:%04X",
v_str,
assert(handle != NULL);
- stlink_usb_init_buffer(handle, h->rx_ep, 84);
+ stlink_usb_init_buffer(handle, h->rx_ep, 88);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
- if (h->version.jtag_api == STLINK_JTAG_API_V1)
+ if (h->version.jtag_api == STLINK_JTAG_API_V1) {
+
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_READALLREGS;
- else
+ res = stlink_usb_xfer(handle, h->databuf, 84);
+ /* regs data from offset 0 */
+ } else {
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READALLREGS;
+ res = stlink_usb_xfer(handle, h->databuf, 88);
+ /* status at offset 0, regs data from offset 4 */
+ }
- res = stlink_usb_xfer(handle, h->databuf, 84);
-
- if (res != ERROR_OK)
- return res;
-
- return ERROR_OK;
+ return res;
}
/** */
Code Review / openocd.git / blobdiff