* Copyright (C) 2011-2012 by Mathias Kuester *
* Mathias Kuester <kesmtp@freenet.de> *
* *
+ * Copyright (C) 2012 by Spencer Oliver *
+ * spen@spen-soft.co.uk *
+ * *
* This code is based on https://github.com/texane/stlink *
* *
* This program is free software; you can redistribute it and/or modify *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
***************************************************************************/
#ifdef HAVE_CONFIG_H
/* project specific includes */
#include <helper/binarybuffer.h>
#include <jtag/interface.h>
-#include <jtag/stlink/stlink_layout.h>
-#include <jtag/stlink/stlink_transport.h>
-#include <jtag/stlink/stlink_interface.h>
+#include <jtag/hla/hla_layout.h>
+#include <jtag/hla/hla_transport.h>
+#include <jtag/hla/hla_interface.h>
#include <target/target.h>
+#include <target/cortex_m.h>
+
#include "libusb_common.h"
-#define ENDPOINT_IN 0x80
-#define ENDPOINT_OUT 0x00
+#define ENDPOINT_IN 0x80
+#define ENDPOINT_OUT 0x00
+
+#define STLINK_WRITE_TIMEOUT 1000
+#define STLINK_READ_TIMEOUT 1000
+
+#define STLINK_NULL_EP 0
+#define STLINK_RX_EP (1|ENDPOINT_IN)
+#define STLINK_TX_EP (2|ENDPOINT_OUT)
+#define STLINK_TRACE_EP (3|ENDPOINT_IN)
+
+#define STLINK_V2_1_TX_EP (1|ENDPOINT_OUT)
+#define STLINK_V2_1_TRACE_EP (2|ENDPOINT_IN)
+
+#define STLINK_SG_SIZE (31)
+#define STLINK_DATA_SIZE (4096)
+#define STLINK_CMD_SIZE_V2 (16)
+#define STLINK_CMD_SIZE_V1 (10)
+
+#define STLINK_V1_PID (0x3744)
+#define STLINK_V2_PID (0x3748)
+#define STLINK_V2_1_PID (0x374B)
+
+/* the current implementation of the stlink limits
+ * 8bit read/writes to max 64 bytes. */
+#define STLINK_MAX_RW8 (64)
-#define STLINK_NULL_EP 0
-#define STLINK_RX_EP (1|ENDPOINT_IN)
-#define STLINK_TX_EP (2|ENDPOINT_OUT)
-#define STLINK_SG_SIZE (31)
-#define STLINK_DATA_SIZE (4*128)
-#define STLINK_CMD_SIZE_V2 (16)
-#define STLINK_CMD_SIZE_V1 (10)
+/* "WAIT" responses will be retried (with exponential backoff) at
+ * most this many times before failing to caller.
+ */
+#define MAX_WAIT_RETRIES 8
enum stlink_jtag_api_version {
- STLINK_JTAG_API_V1 = 0,
+ STLINK_JTAG_API_V1 = 1,
STLINK_JTAG_API_V2,
};
/** */
struct libusb_transfer *trans;
/** */
+ uint8_t rx_ep;
+ /** */
+ uint8_t tx_ep;
+ /** */
+ uint8_t trace_ep;
+ /** */
uint8_t cmdbuf[STLINK_SG_SIZE];
/** */
uint8_t cmdidx;
/** */
uint8_t databuf[STLINK_DATA_SIZE];
/** */
- enum stlink_transports transport;
+ uint32_t max_mem_packet;
+ /** */
+ enum hl_transports transport;
/** */
struct stlink_usb_version version;
/** */
uint16_t pid;
/** this is the currently used jtag api */
enum stlink_jtag_api_version jtag_api;
+ /** */
+ struct {
+ /** whether SWO tracing is enabled or not */
+ bool enabled;
+ /** trace module source clock */
+ uint32_t source_hz;
+ } trace;
+ /** reconnect is needed next time we try to query the
+ * status */
+ bool reconnect_pending;
};
-#define STLINK_DEBUG_ERR_OK 0x80
-#define STLINK_DEBUG_ERR_FAULT 0x81
-#define STLINK_CORE_RUNNING 0x80
-#define STLINK_CORE_HALTED 0x81
-#define STLINK_CORE_STAT_UNKNOWN -1
-
-#define STLINK_GET_VERSION 0xF1
-#define STLINK_DEBUG_COMMAND 0xF2
-#define STLINK_DFU_COMMAND 0xF3
-#define STLINK_SWIM_COMMAND 0xF4
-#define STLINK_GET_CURRENT_MODE 0xF5
-
-#define STLINK_DEV_DFU_MODE 0x00
-#define STLINK_DEV_MASS_MODE 0x01
-#define STLINK_DEV_DEBUG_MODE 0x02
-#define STLINK_DEV_SWIM_MODE 0x03
-#define STLINK_DEV_BOOTLOADER_MODE 0x04
-#define STLINK_DEV_UNKNOWN_MODE -1
-
-#define STLINK_DFU_EXIT 0x07
-
-#define STLINK_SWIM_ENTER 0x00
-#define STLINK_SWIM_EXIT 0x01
-
-#define STLINK_DEBUG_ENTER_JTAG 0x00
-#define STLINK_DEBUG_GETSTATUS 0x01
-#define STLINK_DEBUG_FORCEDEBUG 0x02
-#define STLINK_DEBUG_APIV1_RESETSYS 0x03
-#define STLINK_DEBUG_APIV1_READALLREGS 0x04
-#define STLINK_DEBUG_APIV1_READREG 0x05
-#define STLINK_DEBUG_APIV1_WRITEREG 0x06
-#define STLINK_DEBUG_READMEM_32BIT 0x07
-#define STLINK_DEBUG_WRITEMEM_32BIT 0x08
-#define STLINK_DEBUG_RUNCORE 0x09
-#define STLINK_DEBUG_STEPCORE 0x0a
-#define STLINK_DEBUG_APIV1_SETFP 0x0b
-#define STLINK_DEBUG_READMEM_8BIT 0x0c
-#define STLINK_DEBUG_WRITEMEM_8BIT 0x0d
-#define STLINK_DEBUG_APIV1_CLEARFP 0x0e
-#define STLINK_DEBUG_APIV1_WRITEDEBUGREG 0x0f
-#define STLINK_DEBUG_APIV1_SETWATCHPOINT 0x10
-
-#define STLINK_DEBUG_ENTER_JTAG 0x00
-#define STLINK_DEBUG_ENTER_SWD 0xa3
-
-#define STLINK_DEBUG_APIV1_ENTER 0x20
-#define STLINK_DEBUG_EXIT 0x21
-#define STLINK_DEBUG_READCOREID 0x22
-
-#define STLINK_DEBUG_APIV2_ENTER 0x30
-#define STLINK_DEBUG_APIV2_READ_IDCODES 0x31
-#define STLINK_DEBUG_APIV2_RESETSYS 0x32
-#define STLINK_DEBUG_APIV2_READREG 0x33
-#define STLINK_DEBUG_APIV2_WRITEREG 0x34
-
-#define STLINK_DEBUG_APIV2_READALLREGS 0x3A
-
-#define STLINK_DEBUG_APIV2_DRIVE_NRST 0x3C
-
-#define STLINK_DEBUG_APIV2_DRIVE_NRST_LOW 0x00
-#define STLINK_DEBUG_APIV2_DRIVE_NRST_HIGH 0x01
-#define STLINK_DEBUG_APIV2_DRIVE_NRST_PULSE 0x02
+#define STLINK_DEBUG_ERR_OK 0x80
+#define STLINK_DEBUG_ERR_FAULT 0x81
+#define STLINK_SWD_AP_WAIT 0x10
+#define STLINK_JTAG_WRITE_ERROR 0x0c
+#define STLINK_JTAG_WRITE_VERIF_ERROR 0x0d
+#define STLINK_SWD_DP_WAIT 0x14
+
+#define STLINK_CORE_RUNNING 0x80
+#define STLINK_CORE_HALTED 0x81
+#define STLINK_CORE_STAT_UNKNOWN -1
+
+#define STLINK_GET_VERSION 0xF1
+#define STLINK_DEBUG_COMMAND 0xF2
+#define STLINK_DFU_COMMAND 0xF3
+#define STLINK_SWIM_COMMAND 0xF4
+#define STLINK_GET_CURRENT_MODE 0xF5
+#define STLINK_GET_TARGET_VOLTAGE 0xF7
+
+#define STLINK_DEV_DFU_MODE 0x00
+#define STLINK_DEV_MASS_MODE 0x01
+#define STLINK_DEV_DEBUG_MODE 0x02
+#define STLINK_DEV_SWIM_MODE 0x03
+#define STLINK_DEV_BOOTLOADER_MODE 0x04
+#define STLINK_DEV_UNKNOWN_MODE -1
+
+#define STLINK_DFU_EXIT 0x07
+
+#define STLINK_SWIM_ENTER 0x00
+#define STLINK_SWIM_EXIT 0x01
+
+#define STLINK_DEBUG_ENTER_JTAG 0x00
+#define STLINK_DEBUG_GETSTATUS 0x01
+#define STLINK_DEBUG_FORCEDEBUG 0x02
+#define STLINK_DEBUG_APIV1_RESETSYS 0x03
+#define STLINK_DEBUG_APIV1_READALLREGS 0x04
+#define STLINK_DEBUG_APIV1_READREG 0x05
+#define STLINK_DEBUG_APIV1_WRITEREG 0x06
+#define STLINK_DEBUG_READMEM_32BIT 0x07
+#define STLINK_DEBUG_WRITEMEM_32BIT 0x08
+#define STLINK_DEBUG_RUNCORE 0x09
+#define STLINK_DEBUG_STEPCORE 0x0a
+#define STLINK_DEBUG_APIV1_SETFP 0x0b
+#define STLINK_DEBUG_READMEM_8BIT 0x0c
+#define STLINK_DEBUG_WRITEMEM_8BIT 0x0d
+#define STLINK_DEBUG_APIV1_CLEARFP 0x0e
+#define STLINK_DEBUG_APIV1_WRITEDEBUGREG 0x0f
+#define STLINK_DEBUG_APIV1_SETWATCHPOINT 0x10
+
+#define STLINK_DEBUG_ENTER_JTAG 0x00
+#define STLINK_DEBUG_ENTER_SWD 0xa3
+
+#define STLINK_DEBUG_APIV1_ENTER 0x20
+#define STLINK_DEBUG_EXIT 0x21
+#define STLINK_DEBUG_READCOREID 0x22
+
+#define STLINK_DEBUG_APIV2_ENTER 0x30
+#define STLINK_DEBUG_APIV2_READ_IDCODES 0x31
+#define STLINK_DEBUG_APIV2_RESETSYS 0x32
+#define STLINK_DEBUG_APIV2_READREG 0x33
+#define STLINK_DEBUG_APIV2_WRITEREG 0x34
+#define STLINK_DEBUG_APIV2_WRITEDEBUGREG 0x35
+#define STLINK_DEBUG_APIV2_READDEBUGREG 0x36
+
+#define STLINK_DEBUG_APIV2_READALLREGS 0x3A
+#define STLINK_DEBUG_APIV2_GETLASTRWSTATUS 0x3B
+#define STLINK_DEBUG_APIV2_DRIVE_NRST 0x3C
+
+#define STLINK_DEBUG_APIV2_START_TRACE_RX 0x40
+#define STLINK_DEBUG_APIV2_STOP_TRACE_RX 0x41
+#define STLINK_DEBUG_APIV2_GET_TRACE_NB 0x42
+#define STLINK_DEBUG_APIV2_SWD_SET_FREQ 0x43
+
+#define STLINK_DEBUG_APIV2_DRIVE_NRST_LOW 0x00
+#define STLINK_DEBUG_APIV2_DRIVE_NRST_HIGH 0x01
+#define STLINK_DEBUG_APIV2_DRIVE_NRST_PULSE 0x02
+
+#define STLINK_TRACE_SIZE 1024
+#define STLINK_TRACE_MAX_HZ 2000000
+#define STLINK_TRACE_MIN_VERSION 13
/** */
enum stlink_mode {
STLINK_MODE_DEBUG_SWIM
};
-#define REQUEST_SENSE 0x03
-#define REQUEST_SENSE_LENGTH 18
+#define REQUEST_SENSE 0x03
+#define REQUEST_SENSE_LENGTH 18
+
+static const struct {
+ int speed;
+ int speed_divisor;
+} stlink_khz_to_speed_map[] = {
+ {4000, 0},
+ {1800, 1}, /* default */
+ {1200, 2},
+ {950, 3},
+ {480, 7},
+ {240, 15},
+ {125, 31},
+ {100, 40},
+ {50, 79},
+ {25, 158},
+ {15, 265},
+ {5, 798}
+};
static void stlink_usb_init_buffer(void *handle, uint8_t direction, uint32_t size);
/** */
static int stlink_usb_xfer_v1_get_status(void *handle)
{
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
-
/* read status */
memset(h->cmdbuf, 0, STLINK_SG_SIZE);
- if (jtag_libusb_bulk_read(h->fd, STLINK_RX_EP, (char *)h->cmdbuf,
- 13, 1000) != 13)
+ if (jtag_libusb_bulk_read(h->fd, h->rx_ep, (char *)h->cmdbuf,
+ 13, STLINK_READ_TIMEOUT) != 13)
return ERROR_FAIL;
uint32_t t1;
/** */
static int stlink_usb_xfer_rw(void *handle, int cmdsize, const uint8_t *buf, int size)
{
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
-
- if (jtag_libusb_bulk_write(h->fd, STLINK_TX_EP, (char *)h->cmdbuf, cmdsize,
- 1000) != cmdsize) {
+ if (jtag_libusb_bulk_write(h->fd, h->tx_ep, (char *)h->cmdbuf, cmdsize,
+ STLINK_WRITE_TIMEOUT) != cmdsize) {
return ERROR_FAIL;
}
- if (h->direction == STLINK_TX_EP && size) {
- if (jtag_libusb_bulk_write(h->fd, STLINK_TX_EP, (char *)buf,
- size, 1000) != size) {
+ if (h->direction == h->tx_ep && size) {
+ if (jtag_libusb_bulk_write(h->fd, h->tx_ep, (char *)buf,
+ size, STLINK_WRITE_TIMEOUT) != size) {
LOG_DEBUG("bulk write failed");
return ERROR_FAIL;
}
- } else if (h->direction == STLINK_RX_EP && size) {
- if (jtag_libusb_bulk_read(h->fd, STLINK_RX_EP, (char *)buf,
- size, 1000) != size) {
+ } else if (h->direction == h->rx_ep && size) {
+ if (jtag_libusb_bulk_read(h->fd, h->rx_ep, (char *)buf,
+ size, STLINK_READ_TIMEOUT) != size) {
LOG_DEBUG("bulk read failed");
return ERROR_FAIL;
}
static int stlink_usb_xfer_v1_get_sense(void *handle)
{
int res;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
-
- stlink_usb_init_buffer(handle, STLINK_RX_EP, 16);
+ stlink_usb_init_buffer(handle, h->rx_ep, 16);
h->cmdbuf[h->cmdidx++] = REQUEST_SENSE;
h->cmdbuf[h->cmdidx++] = 0;
static int stlink_usb_xfer(void *handle, const uint8_t *buf, int size)
{
int err, cmdsize = STLINK_CMD_SIZE_V2;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
-
if (h->version.stlink == 1)
cmdsize = STLINK_SG_SIZE;
return ERROR_OK;
}
+
+/**
+ Converts an STLINK status code held in the first byte of a response
+ to an openocd error, logs any error/wait status as debug output.
+*/
+static int stlink_usb_error_check(void *handle)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle != NULL);
+
+ /* TODO: no error checking yet on api V1 */
+ if (h->jtag_api == STLINK_JTAG_API_V1)
+ h->databuf[0] = STLINK_DEBUG_ERR_OK;
+
+ switch (h->databuf[0]) {
+ case STLINK_DEBUG_ERR_OK:
+ return ERROR_OK;
+ case STLINK_DEBUG_ERR_FAULT:
+ LOG_DEBUG("SWD fault response (0x%x)", STLINK_DEBUG_ERR_FAULT);
+ return ERROR_FAIL;
+ case STLINK_SWD_AP_WAIT:
+ LOG_DEBUG("wait status SWD_AP_WAIT (0x%x)", STLINK_SWD_AP_WAIT);
+ return ERROR_WAIT;
+ case STLINK_SWD_DP_WAIT:
+ LOG_DEBUG("wait status SWD_DP_WAIT (0x%x)", STLINK_SWD_DP_WAIT);
+ return ERROR_WAIT;
+ case STLINK_JTAG_WRITE_ERROR:
+ LOG_DEBUG("Write error");
+ return ERROR_FAIL;
+ case STLINK_JTAG_WRITE_VERIF_ERROR:
+ LOG_DEBUG("Verify error");
+ return ERROR_FAIL;
+ default:
+ LOG_DEBUG("unknown/unexpected STLINK status code 0x%x", h->databuf[0]);
+ return ERROR_FAIL;
+ }
+}
+
+
+/** Issue an STLINK command via USB transfer, with retries on any wait status responses.
+
+ Works for commands where the STLINK_DEBUG status is returned in the first
+ byte of the response packet.
+
+ Returns an openocd result code.
+*/
+static int stlink_cmd_allow_retry(void *handle, const uint8_t *buf, int size)
+{
+ int retries = 0;
+ int res;
+ while (1) {
+ res = stlink_usb_xfer(handle, buf, size);
+ if (res != ERROR_OK)
+ return res;
+ res = stlink_usb_error_check(handle);
+ if (res == ERROR_WAIT && retries < MAX_WAIT_RETRIES) {
+ usleep((1<<retries++) * 1000);
+ continue;
+ }
+ return res;
+ }
+}
+
/** */
-static void stlink_usb_xfer_v1_create_cmd(void *handle, uint8_t direction, uint32_t size)
+static int stlink_usb_read_trace(void *handle, const uint8_t *buf, int size)
{
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle != NULL);
+
+ assert(h->version.stlink >= 2);
+
+ if (jtag_libusb_bulk_read(h->fd, h->trace_ep, (char *)buf,
+ size, STLINK_READ_TIMEOUT) != size) {
+ LOG_ERROR("bulk trace read failed");
+ return ERROR_FAIL;
+ }
- h = (struct stlink_usb_handle_s *)handle;
+ return ERROR_OK;
+}
+
+/** */
+static void stlink_usb_xfer_v1_create_cmd(void *handle, uint8_t direction, uint32_t size)
+{
+ struct stlink_usb_handle_s *h = handle;
/* fill the send buffer */
strcpy((char *)h->cmdbuf, "USBC");
h->cmdidx += 4;
buf_set_u32(h->cmdbuf+h->cmdidx, 0, 32, size);
h->cmdidx += 4;
- h->cmdbuf[h->cmdidx++] = (direction == STLINK_RX_EP ? ENDPOINT_IN : ENDPOINT_OUT);
+ h->cmdbuf[h->cmdidx++] = (direction == h->rx_ep ? ENDPOINT_IN : ENDPOINT_OUT);
h->cmdbuf[h->cmdidx++] = 0; /* lun */
h->cmdbuf[h->cmdidx++] = STLINK_CMD_SIZE_V1;
}
/** */
static void stlink_usb_init_buffer(void *handle, uint8_t direction, uint32_t size)
{
- struct stlink_usb_handle_s *h;
-
- h = (struct stlink_usb_handle_s *)handle;
+ struct stlink_usb_handle_s *h = handle;
h->direction = direction;
stlink_usb_xfer_v1_create_cmd(handle, direction, size);
}
-static const char * const stlink_usb_error_msg[] = {
- "unknown"
-};
-
-/** */
-static int stlink_usb_error_check(void *handle)
-{
- int res;
- const char *err_msg = 0;
- struct stlink_usb_handle_s *h;
-
- assert(handle != NULL);
-
- h = (struct stlink_usb_handle_s *)handle;
-
- /* TODO: no error checking yet on api V1 */
- if (h->jtag_api == STLINK_JTAG_API_V1)
- h->databuf[0] = STLINK_DEBUG_ERR_OK;
-
- switch (h->databuf[0]) {
- case STLINK_DEBUG_ERR_OK:
- res = ERROR_OK;
- break;
- case STLINK_DEBUG_ERR_FAULT:
- default:
- err_msg = stlink_usb_error_msg[0];
- res = ERROR_FAIL;
- break;
- }
-
- if (res != ERROR_OK)
- LOG_DEBUG("status error: %d ('%s')", h->databuf[0], err_msg);
-
- return res;
-}
-
/** */
static int stlink_usb_version(void *handle)
{
int res;
uint16_t v;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
-
- stlink_usb_init_buffer(handle, STLINK_RX_EP, 6);
+ stlink_usb_init_buffer(handle, h->rx_ep, 6);
h->cmdbuf[h->cmdidx++] = STLINK_GET_VERSION;
h->pid = buf_get_u32(h->databuf, 32, 16);
/* set the supported jtag api version
- * V1 doesn't support API V2 at all
- * V2 support API V2 since JTAG V13
+ * API V2 is supported since JTAG V11
*/
- if ((h->version.stlink == 2) && (h->version.jtag > 12))
+ if (h->version.jtag >= 11)
h->version.jtag_api_max = STLINK_JTAG_API_V2;
else
h->version.jtag_api_max = STLINK_JTAG_API_V1;
- LOG_DEBUG("STLINK v%d JTAG v%d API v%d SWIM v%d VID 0x%04X PID 0x%04X",
+ LOG_INFO("STLINK v%d JTAG v%d API v%d SWIM v%d VID 0x%04X PID 0x%04X",
h->version.stlink,
h->version.jtag,
(h->version.jtag_api_max == STLINK_JTAG_API_V1) ? 1 : 2,
return ERROR_OK;
}
+static int stlink_usb_check_voltage(void *handle, float *target_voltage)
+{
+ struct stlink_usb_handle_s *h = handle;
+ uint32_t adc_results[2];
+
+ /* only supported by stlink/v2 and for firmware >= 13 */
+ if (h->version.stlink == 1 || h->version.jtag < 13)
+ return ERROR_COMMAND_NOTFOUND;
+
+ stlink_usb_init_buffer(handle, h->rx_ep, 8);
+
+ h->cmdbuf[h->cmdidx++] = STLINK_GET_TARGET_VOLTAGE;
+
+ int result = stlink_usb_xfer(handle, h->databuf, 8);
+
+ if (result != ERROR_OK)
+ return result;
+
+ /* convert result */
+ adc_results[0] = le_to_h_u32(h->databuf);
+ adc_results[1] = le_to_h_u32(h->databuf + 4);
+
+ *target_voltage = 0;
+
+ if (adc_results[0])
+ *target_voltage = 2 * ((float)adc_results[1]) * (float)(1.2 / adc_results[0]);
+
+ LOG_INFO("Target voltage: %f", (double)*target_voltage);
+
+ return ERROR_OK;
+}
+
+static int stlink_usb_set_swdclk(void *handle, uint16_t clk_divisor)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle != NULL);
+
+ /* only supported by stlink/v2 and for firmware >= 22 */
+ if (h->version.stlink == 1 || h->version.jtag < 22)
+ return ERROR_COMMAND_NOTFOUND;
+
+ stlink_usb_init_buffer(handle, h->rx_ep, 2);
+
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_SWD_SET_FREQ;
+ h_u16_to_le(h->cmdbuf+h->cmdidx, clk_divisor);
+ h->cmdidx += 2;
+
+ int result = stlink_cmd_allow_retry(handle, h->databuf, 2);
+
+ if (result != ERROR_OK)
+ return result;
+
+ return ERROR_OK;
+}
+
/** */
static int stlink_usb_current_mode(void *handle, uint8_t *mode)
{
int res;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
-
- stlink_usb_init_buffer(handle, STLINK_RX_EP, 2);
+ stlink_usb_init_buffer(handle, h->rx_ep, 2);
h->cmdbuf[h->cmdidx++] = STLINK_GET_CURRENT_MODE;
/** */
static int stlink_usb_mode_enter(void *handle, enum stlink_mode type)
{
- int res;
int rx_size = 0;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
-
/* on api V2 we are able the read the latest command
* status
* TODO: we need the test on api V1 too
if (h->jtag_api == STLINK_JTAG_API_V2)
rx_size = 2;
- stlink_usb_init_buffer(handle, STLINK_RX_EP, rx_size);
+ stlink_usb_init_buffer(handle, h->rx_ep, rx_size);
switch (type) {
case STLINK_MODE_DEBUG_JTAG:
return ERROR_FAIL;
}
- res = stlink_usb_xfer(handle, h->databuf, rx_size);
-
- if (res != ERROR_OK)
- return res;
-
- res = stlink_usb_error_check(h);
-
- return res;
+ return stlink_cmd_allow_retry(handle, h->databuf, rx_size);
}
/** */
static int stlink_usb_mode_leave(void *handle, enum stlink_mode type)
{
int res;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
-
stlink_usb_init_buffer(handle, STLINK_NULL_EP, 0);
switch (type) {
return ERROR_OK;
}
+static int stlink_usb_assert_srst(void *handle, int srst);
+
+static enum stlink_mode stlink_get_mode(enum hl_transports t)
+{
+ switch (t) {
+ case HL_TRANSPORT_SWD:
+ return STLINK_MODE_DEBUG_SWD;
+ case HL_TRANSPORT_JTAG:
+ return STLINK_MODE_DEBUG_JTAG;
+ case HL_TRANSPORT_SWIM:
+ return STLINK_MODE_DEBUG_SWIM;
+ default:
+ return STLINK_MODE_UNKNOWN;
+ }
+}
+
/** */
-static int stlink_usb_init_mode(void *handle)
+static int stlink_usb_init_mode(void *handle, bool connect_under_reset)
{
int res;
uint8_t mode;
enum stlink_mode emode;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
-
res = stlink_usb_current_mode(handle, &mode);
if (res != ERROR_OK)
if (res != ERROR_OK)
return res;
+ /* we check the target voltage here as an aid to debugging connection problems.
+ * the stlink requires the target Vdd to be connected for reliable debugging.
+ * this cmd is supported in all modes except DFU
+ */
+ if (mode != STLINK_DEV_DFU_MODE) {
+
+ float target_voltage;
+
+ /* check target voltage (if supported) */
+ res = stlink_usb_check_voltage(h, &target_voltage);
+
+ if (res != ERROR_OK) {
+ if (res != ERROR_COMMAND_NOTFOUND)
+ LOG_ERROR("voltage check failed");
+ /* attempt to continue as it is not a catastrophic failure */
+ } else {
+ /* check for a sensible target voltage, operating range is 1.65-5.5v
+ * according to datasheet */
+ if (target_voltage < 1.5)
+ LOG_ERROR("target voltage may be too low for reliable debugging");
+ }
+ }
+
LOG_DEBUG("MODE: 0x%02X", mode);
/* set selected mode */
- switch (h->transport) {
- case STLINK_TRANSPORT_SWD:
- emode = STLINK_MODE_DEBUG_SWD;
- break;
- case STLINK_TRANSPORT_JTAG:
- emode = STLINK_MODE_DEBUG_JTAG;
- break;
- case STLINK_TRANSPORT_SWIM:
- emode = STLINK_MODE_DEBUG_SWIM;
- break;
- default:
- emode = STLINK_MODE_UNKNOWN;
- break;
- }
+ emode = stlink_get_mode(h->transport);
if (emode == STLINK_MODE_UNKNOWN) {
LOG_ERROR("selected mode (transport) not supported");
return ERROR_FAIL;
}
+ if (connect_under_reset) {
+ res = stlink_usb_assert_srst(handle, 0);
+ if (res != ERROR_OK)
+ return res;
+ }
+
res = stlink_usb_mode_enter(handle, emode);
if (res != ERROR_OK)
static int stlink_usb_idcode(void *handle, uint32_t *idcode)
{
int res;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
-
- stlink_usb_init_buffer(handle, STLINK_RX_EP, 4);
+ stlink_usb_init_buffer(handle, h->rx_ep, 4);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_READCOREID;
*idcode = le_to_h_u32(h->databuf);
- LOG_DEBUG("IDCODE: 0x%08X", *idcode);
+ LOG_DEBUG("IDCODE: 0x%08" PRIX32, *idcode);
+
+ return ERROR_OK;
+}
+
+static int stlink_usb_v2_read_debug_reg(void *handle, uint32_t addr, uint32_t *val)
+{
+ struct stlink_usb_handle_s *h = handle;
+ int res;
+
+ assert(handle != NULL);
+
+ stlink_usb_init_buffer(handle, h->rx_ep, 8);
+
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READDEBUGREG;
+ h_u32_to_le(h->cmdbuf+h->cmdidx, addr);
+ h->cmdidx += 4;
+
+ res = stlink_cmd_allow_retry(handle, h->databuf, 8);
+ if (res != ERROR_OK)
+ return res;
+
+ *val = le_to_h_u32(h->databuf + 4);
+ return ERROR_OK;
+}
+
+static int stlink_usb_write_debug_reg(void *handle, uint32_t addr, uint32_t val)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle != NULL);
+
+ stlink_usb_init_buffer(handle, h->rx_ep, 2);
+
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ if (h->jtag_api == STLINK_JTAG_API_V1)
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_WRITEDEBUGREG;
+ else
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_WRITEDEBUGREG;
+ h_u32_to_le(h->cmdbuf+h->cmdidx, addr);
+ h->cmdidx += 4;
+ h_u32_to_le(h->cmdbuf+h->cmdidx, val);
+ h->cmdidx += 4;
+
+ return stlink_cmd_allow_retry(handle, h->databuf, 2);
+}
+
+/** */
+static int stlink_usb_trace_read(void *handle, uint8_t *buf, size_t *size)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle != NULL);
+
+ if (h->trace.enabled && h->version.jtag >= STLINK_TRACE_MIN_VERSION) {
+ int res;
+
+ stlink_usb_init_buffer(handle, h->rx_ep, 10);
+
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GET_TRACE_NB;
+ res = stlink_usb_xfer(handle, h->databuf, 2);
+ if (res != ERROR_OK)
+ return res;
+
+ size_t bytes_avail = le_to_h_u16(h->databuf);
+ *size = bytes_avail < *size ? bytes_avail : *size - 1;
+
+ if (*size > 0) {
+ res = stlink_usb_read_trace(handle, buf, *size);
+ if (res != ERROR_OK)
+ return res;
+ return ERROR_OK;
+ }
+ }
+ *size = 0;
return ERROR_OK;
}
+static enum target_state stlink_usb_v2_get_status(void *handle)
+{
+ int result;
+ uint32_t status;
+
+ result = stlink_usb_v2_read_debug_reg(handle, DCB_DHCSR, &status);
+ if (result != ERROR_OK)
+ return TARGET_UNKNOWN;
+
+ if (status & S_HALT)
+ return TARGET_HALTED;
+ else if (status & S_RESET_ST)
+ return TARGET_RESET;
+
+ return TARGET_RUNNING;
+}
+
/** */
static enum target_state stlink_usb_state(void *handle)
{
int res;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
+ if (h->reconnect_pending) {
+ LOG_INFO("Previous state query failed, trying to reconnect");
+ res = stlink_usb_mode_enter(handle, stlink_get_mode(h->transport));
- if (h->jtag_api == STLINK_JTAG_API_V2)
- return TARGET_UNKNOWN;
+ if (res != ERROR_OK)
+ return TARGET_UNKNOWN;
+
+ h->reconnect_pending = false;
+ }
+
+ if (h->jtag_api == STLINK_JTAG_API_V2) {
+ res = stlink_usb_v2_get_status(handle);
+ if (res == TARGET_UNKNOWN)
+ h->reconnect_pending = true;
+ return res;
+ }
- stlink_usb_init_buffer(handle, STLINK_RX_EP, 2);
+ stlink_usb_init_buffer(handle, h->rx_ep, 2);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_GETSTATUS;
if (h->databuf[0] == STLINK_CORE_HALTED)
return TARGET_HALTED;
+ h->reconnect_pending = true;
+
return TARGET_UNKNOWN;
}
+static int stlink_usb_assert_srst(void *handle, int srst)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle != NULL);
+
+ if (h->version.stlink == 1)
+ return ERROR_COMMAND_NOTFOUND;
+
+ stlink_usb_init_buffer(handle, h->rx_ep, 2);
+
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_DRIVE_NRST;
+ h->cmdbuf[h->cmdidx++] = srst;
+
+ return stlink_cmd_allow_retry(handle, h->databuf, 2);
+}
+
/** */
-static int stlink_usb_reset(void *handle)
+static void stlink_usb_trace_disable(void *handle)
+{
+ int res = ERROR_OK;
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle != NULL);
+
+ assert(h->version.jtag >= STLINK_TRACE_MIN_VERSION);
+
+ LOG_DEBUG("Tracing: disable");
+
+ stlink_usb_init_buffer(handle, h->rx_ep, 2);
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_STOP_TRACE_RX;
+ res = stlink_usb_xfer(handle, h->databuf, 2);
+
+ if (res == ERROR_OK)
+ h->trace.enabled = false;
+}
+
+
+/** */
+static int stlink_usb_trace_enable(void *handle)
{
int res;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
+ if (h->version.jtag >= STLINK_TRACE_MIN_VERSION) {
+ stlink_usb_init_buffer(handle, h->rx_ep, 10);
- stlink_usb_init_buffer(handle, STLINK_RX_EP, 2);
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_START_TRACE_RX;
+ h_u16_to_le(h->cmdbuf+h->cmdidx, (uint16_t)STLINK_TRACE_SIZE);
+ h->cmdidx += 2;
+ h_u32_to_le(h->cmdbuf+h->cmdidx, h->trace.source_hz);
+ h->cmdidx += 4;
+
+ res = stlink_usb_xfer(handle, h->databuf, 2);
+
+ if (res == ERROR_OK) {
+ h->trace.enabled = true;
+ LOG_DEBUG("Tracing: recording at %" PRIu32 "Hz", h->trace.source_hz);
+ }
+ } else {
+ LOG_ERROR("Tracing is not supported by this version.");
+ res = ERROR_FAIL;
+ }
+
+ return res;
+}
+
+/** */
+static int stlink_usb_reset(void *handle)
+{
+ struct stlink_usb_handle_s *h = handle;
+ int retval;
+
+ assert(handle != NULL);
+
+ stlink_usb_init_buffer(handle, h->rx_ep, 2);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
else
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_RESETSYS;
- res = stlink_usb_xfer(handle, h->databuf, 2);
+ retval = stlink_cmd_allow_retry(handle, h->databuf, 2);
+ if (retval != ERROR_OK)
+ return retval;
- if (res != ERROR_OK)
- return res;
-
- LOG_DEBUG("RESET: 0x%08X", h->databuf[0]);
+ if (h->trace.enabled) {
+ stlink_usb_trace_disable(h);
+ return stlink_usb_trace_enable(h);
+ }
- return h->databuf[0] == STLINK_DEBUG_ERR_OK ? ERROR_OK : ERROR_FAIL;
+ return ERROR_OK;
}
/** */
static int stlink_usb_run(void *handle)
{
int res;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
+ if (h->jtag_api == STLINK_JTAG_API_V2) {
+ res = stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_DEBUGEN);
- if (h->jtag_api == STLINK_JTAG_API_V2)
- return ERROR_FAIL;
+ return res;
+ }
- stlink_usb_init_buffer(handle, STLINK_RX_EP, 2);
+ stlink_usb_init_buffer(handle, h->rx_ep, 2);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_RUNCORE;
- res = stlink_usb_xfer(handle, h->databuf, 2);
-
- if (res != ERROR_OK)
- return res;
-
- return h->databuf[0] == STLINK_DEBUG_ERR_OK ? ERROR_OK : ERROR_FAIL;
+ return stlink_cmd_allow_retry(handle, h->databuf, 2);
}
/** */
static int stlink_usb_halt(void *handle)
{
int res;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
+ if (h->jtag_api == STLINK_JTAG_API_V2) {
+ res = stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_DEBUGEN);
- if (h->jtag_api == STLINK_JTAG_API_V2)
- return ERROR_FAIL;
+ return res;
+ }
- stlink_usb_init_buffer(handle, STLINK_RX_EP, 2);
+ stlink_usb_init_buffer(handle, h->rx_ep, 2);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_FORCEDEBUG;
- res = stlink_usb_xfer(handle, h->databuf, 2);
-
- if (res != ERROR_OK)
- return res;
-
- return h->databuf[0] == STLINK_DEBUG_ERR_OK ? ERROR_OK : ERROR_FAIL;
+ return stlink_cmd_allow_retry(handle, h->databuf, 2);
}
/** */
static int stlink_usb_step(void *handle)
{
- int res;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
-
- if (h->jtag_api == STLINK_JTAG_API_V2)
- return ERROR_FAIL;
+ if (h->jtag_api == STLINK_JTAG_API_V2) {
+ /* TODO: this emulates the v1 api, it should really use a similar auto mask isr
+ * that the cortex-m3 currently does. */
+ stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_MASKINTS|C_DEBUGEN);
+ stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_STEP|C_MASKINTS|C_DEBUGEN);
+ return stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_DEBUGEN);
+ }
- stlink_usb_init_buffer(handle, STLINK_RX_EP, 2);
+ stlink_usb_init_buffer(handle, h->rx_ep, 2);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_STEPCORE;
- res = stlink_usb_xfer(handle, h->databuf, 2);
-
- if (res != ERROR_OK)
- return res;
-
- return h->databuf[0] == STLINK_DEBUG_ERR_OK ? ERROR_OK : ERROR_FAIL;
+ return stlink_cmd_allow_retry(handle, h->databuf, 2);
}
/** */
static int stlink_usb_read_regs(void *handle)
{
int res;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
-
- stlink_usb_init_buffer(handle, STLINK_RX_EP, 84);
+ stlink_usb_init_buffer(handle, h->rx_ep, 84);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
if (h->jtag_api == STLINK_JTAG_API_V1)
static int stlink_usb_read_reg(void *handle, int num, uint32_t *val)
{
int res;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
-
- stlink_usb_init_buffer(handle, STLINK_RX_EP, 4);
+ stlink_usb_init_buffer(handle, h->rx_ep, h->jtag_api == STLINK_JTAG_API_V1 ? 4 : 8);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
if (h->jtag_api == STLINK_JTAG_API_V1)
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READREG;
h->cmdbuf[h->cmdidx++] = num;
- res = stlink_usb_xfer(handle, h->databuf, 4);
-
- if (res != ERROR_OK)
- return res;
-
- *val = le_to_h_u32(h->databuf);
-
- return ERROR_OK;
+ if (h->jtag_api == STLINK_JTAG_API_V1) {
+ res = stlink_usb_xfer(handle, h->databuf, 4);
+ if (res != ERROR_OK)
+ return res;
+ *val = le_to_h_u32(h->databuf);
+ return ERROR_OK;
+ } else {
+ res = stlink_cmd_allow_retry(handle, h->databuf, 8);
+ if (res != ERROR_OK)
+ return res;
+ *val = le_to_h_u32(h->databuf + 4);
+ return ERROR_OK;
+ }
}
/** */
static int stlink_usb_write_reg(void *handle, int num, uint32_t val)
{
- int res;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
-
- stlink_usb_init_buffer(handle, STLINK_RX_EP, 2);
+ stlink_usb_init_buffer(handle, h->rx_ep, 2);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
if (h->jtag_api == STLINK_JTAG_API_V1)
h_u32_to_le(h->cmdbuf+h->cmdidx, val);
h->cmdidx += 4;
+ return stlink_cmd_allow_retry(handle, h->databuf, 2);
+}
+
+static int stlink_usb_get_rw_status(void *handle)
+{
+ int res;
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle != NULL);
+
+ if (h->jtag_api == STLINK_JTAG_API_V1)
+ return ERROR_OK;
+
+ stlink_usb_init_buffer(handle, h->rx_ep, 2);
+
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GETLASTRWSTATUS;
+
res = stlink_usb_xfer(handle, h->databuf, 2);
if (res != ERROR_OK)
return res;
- return h->databuf[0] == STLINK_DEBUG_ERR_OK ? ERROR_OK : ERROR_FAIL;
+ return stlink_usb_error_check(h);
}
/** */
{
int res;
uint16_t read_len = len;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
+ /* max 8bit read/write is 64bytes */
+ if (len > STLINK_MAX_RW8) {
+ LOG_DEBUG("max buffer length exceeded");
+ return ERROR_FAIL;
+ }
- stlink_usb_init_buffer(handle, STLINK_RX_EP, read_len);
+ stlink_usb_init_buffer(handle, h->rx_ep, read_len);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_READMEM_8BIT;
memcpy(buffer, h->databuf, len);
- return ERROR_OK;
+ return stlink_usb_get_rw_status(handle);
}
/** */
const uint8_t *buffer)
{
int res;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
+ /* max 8bit read/write is 64bytes */
+ if (len > STLINK_MAX_RW8) {
+ LOG_DEBUG("max buffer length exceeded");
+ return ERROR_FAIL;
+ }
- stlink_usb_init_buffer(handle, STLINK_TX_EP, len);
+ stlink_usb_init_buffer(handle, h->tx_ep, len);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_WRITEMEM_8BIT;
if (res != ERROR_OK)
return res;
- return ERROR_OK;
+ return stlink_usb_get_rw_status(handle);
}
/** */
uint8_t *buffer)
{
int res;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
-
- len *= 4;
+ /* data must be a multiple of 4 and word aligned */
+ if (len % 4 || addr % 4) {
+ LOG_DEBUG("Invalid data alignment");
+ return ERROR_TARGET_UNALIGNED_ACCESS;
+ }
- stlink_usb_init_buffer(handle, STLINK_RX_EP, len);
+ stlink_usb_init_buffer(handle, h->rx_ep, len);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_READMEM_32BIT;
memcpy(buffer, h->databuf, len);
- return ERROR_OK;
+ return stlink_usb_get_rw_status(handle);
}
/** */
const uint8_t *buffer)
{
int res;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
- h = (struct stlink_usb_handle_s *)handle;
-
- len *= 4;
+ /* data must be a multiple of 4 and word aligned */
+ if (len % 4 || addr % 4) {
+ LOG_DEBUG("Invalid data alignment");
+ return ERROR_TARGET_UNALIGNED_ACCESS;
+ }
- stlink_usb_init_buffer(handle, STLINK_TX_EP, len);
+ stlink_usb_init_buffer(handle, h->tx_ep, len);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_WRITEMEM_32BIT;
if (res != ERROR_OK)
return res;
+ return stlink_usb_get_rw_status(handle);
+}
+
+static uint32_t stlink_max_block_size(uint32_t tar_autoincr_block, uint32_t address)
+{
+ uint32_t max_tar_block = (tar_autoincr_block - ((tar_autoincr_block - 1) & address));
+ if (max_tar_block == 0)
+ max_tar_block = 4;
+ return max_tar_block;
+}
+
+static int stlink_usb_read_mem(void *handle, uint32_t addr, uint32_t size,
+ uint32_t count, uint8_t *buffer)
+{
+ int retval = ERROR_OK;
+ uint32_t bytes_remaining;
+ int retries = 0;
+ struct stlink_usb_handle_s *h = handle;
+
+ /* calculate byte count */
+ count *= size;
+
+ while (count) {
+
+ bytes_remaining = (size == 4) ? \
+ stlink_max_block_size(h->max_mem_packet, addr) : STLINK_MAX_RW8;
+
+ if (count < bytes_remaining)
+ bytes_remaining = count;
+
+ /* the stlink only supports 8/32bit memory read/writes
+ * honour 32bit, all others will be handled as 8bit access */
+ if (size == 4) {
+
+ /* When in jtag mode the stlink uses the auto-increment functinality.
+ * However it expects us to pass the data correctly, this includes
+ * alignment and any page boundaries. We already do this as part of the
+ * adi_v5 implementation, but the stlink is a hla adapter and so this
+ * needs implementiong manually.
+ * currently this only affects jtag mode, according to ST they do single
+ * access in SWD mode - but this may change and so we do it for both modes */
+
+ /* we first need to check for any unaligned bytes */
+ if (addr % 4) {
+
+ uint32_t head_bytes = 4 - (addr % 4);
+ retval = stlink_usb_read_mem8(handle, addr, head_bytes, buffer);
+ if (retval == ERROR_WAIT && retries < MAX_WAIT_RETRIES) {
+ usleep((1<<retries++) * 1000);
+ continue;
+ }
+ if (retval != ERROR_OK)
+ return retval;
+ buffer += head_bytes;
+ addr += head_bytes;
+ count -= head_bytes;
+ bytes_remaining -= head_bytes;
+ }
+
+ if (bytes_remaining % 4)
+ retval = stlink_usb_read_mem(handle, addr, 1, bytes_remaining, buffer);
+ else
+ retval = stlink_usb_read_mem32(handle, addr, bytes_remaining, buffer);
+ } else
+ retval = stlink_usb_read_mem8(handle, addr, bytes_remaining, buffer);
+
+ if (retval == ERROR_WAIT && retries < MAX_WAIT_RETRIES) {
+ usleep((1<<retries++) * 1000);
+ continue;
+ }
+ if (retval != ERROR_OK)
+ return retval;
+
+ buffer += bytes_remaining;
+ addr += bytes_remaining;
+ count -= bytes_remaining;
+ }
+
+ return retval;
+}
+
+static int stlink_usb_write_mem(void *handle, uint32_t addr, uint32_t size,
+ uint32_t count, const uint8_t *buffer)
+{
+ int retval = ERROR_OK;
+ uint32_t bytes_remaining;
+ int retries = 0;
+ struct stlink_usb_handle_s *h = handle;
+
+ /* calculate byte count */
+ count *= size;
+
+ while (count) {
+
+ bytes_remaining = (size == 4) ? \
+ stlink_max_block_size(h->max_mem_packet, addr) : STLINK_MAX_RW8;
+
+ if (count < bytes_remaining)
+ bytes_remaining = count;
+
+ /* the stlink only supports 8/32bit memory read/writes
+ * honour 32bit, all others will be handled as 8bit access */
+ if (size == 4) {
+
+ /* When in jtag mode the stlink uses the auto-increment functinality.
+ * However it expects us to pass the data correctly, this includes
+ * alignment and any page boundaries. We already do this as part of the
+ * adi_v5 implementation, but the stlink is a hla adapter and so this
+ * needs implementiong manually.
+ * currently this only affects jtag mode, according to ST they do single
+ * access in SWD mode - but this may change and so we do it for both modes */
+
+ /* we first need to check for any unaligned bytes */
+ if (addr % 4) {
+
+ uint32_t head_bytes = 4 - (addr % 4);
+ retval = stlink_usb_write_mem8(handle, addr, head_bytes, buffer);
+ if (retval == ERROR_WAIT && retries < MAX_WAIT_RETRIES) {
+ usleep((1<<retries++) * 1000);
+ continue;
+ }
+ if (retval != ERROR_OK)
+ return retval;
+ buffer += head_bytes;
+ addr += head_bytes;
+ count -= head_bytes;
+ bytes_remaining -= head_bytes;
+ }
+
+ if (bytes_remaining % 4)
+ retval = stlink_usb_write_mem(handle, addr, 1, bytes_remaining, buffer);
+ else
+ retval = stlink_usb_write_mem32(handle, addr, bytes_remaining, buffer);
+
+ } else
+ retval = stlink_usb_write_mem8(handle, addr, bytes_remaining, buffer);
+ if (retval == ERROR_WAIT && retries < MAX_WAIT_RETRIES) {
+ usleep((1<<retries++) * 1000);
+ continue;
+ }
+ if (retval != ERROR_OK)
+ return retval;
+
+ buffer += bytes_remaining;
+ addr += bytes_remaining;
+ count -= bytes_remaining;
+ }
+
+ return retval;
+}
+
+/** */
+static int stlink_usb_override_target(const char *targetname)
+{
+ return !strcmp(targetname, "cortex_m");
+}
+
+static int stlink_speed(void *handle, int khz, bool query)
+{
+ unsigned i;
+ int speed_index = -1;
+ int speed_diff = INT_MAX;
+ struct stlink_usb_handle_s *h = handle;
+
+ /* only supported by stlink/v2 and for firmware >= 22 */
+ if (h && (h->version.stlink == 1 || h->version.jtag < 22))
+ return khz;
+
+ for (i = 0; i < ARRAY_SIZE(stlink_khz_to_speed_map); i++) {
+ if (khz == stlink_khz_to_speed_map[i].speed) {
+ speed_index = i;
+ break;
+ } else {
+ int current_diff = khz - stlink_khz_to_speed_map[i].speed;
+ /* get abs value for comparison */
+ current_diff = (current_diff > 0) ? current_diff : -current_diff;
+ if ((current_diff < speed_diff) && khz >= stlink_khz_to_speed_map[i].speed) {
+ speed_diff = current_diff;
+ speed_index = i;
+ }
+ }
+ }
+
+ bool match = true;
+
+ if (speed_index == -1) {
+ /* this will only be here if we cannot match the slow speed.
+ * use the slowest speed we support.*/
+ speed_index = ARRAY_SIZE(stlink_khz_to_speed_map) - 1;
+ match = false;
+ } else if (i == ARRAY_SIZE(stlink_khz_to_speed_map))
+ match = false;
+
+ if (!match && query) {
+ LOG_INFO("Unable to match requested speed %d kHz, using %d kHz", \
+ khz, stlink_khz_to_speed_map[speed_index].speed);
+ }
+
+ if (h && !query) {
+ int result = stlink_usb_set_swdclk(h, stlink_khz_to_speed_map[speed_index].speed_divisor);
+ if (result != ERROR_OK) {
+ LOG_ERROR("Unable to set adapter speed");
+ return khz;
+ }
+ }
+
+ return stlink_khz_to_speed_map[speed_index].speed;
+}
+
+/** */
+static int stlink_usb_close(void *handle)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ if (h && h->fd)
+ jtag_libusb_close(h->fd);
+
+ free(h);
+
return ERROR_OK;
}
/** */
-static int stlink_usb_open(struct stlink_interface_param_s *param, void **fd)
+static int stlink_usb_open(struct hl_interface_param_s *param, void **fd)
{
- int err;
+ int err, retry_count = 1;
struct stlink_usb_handle_s *h;
+ enum stlink_jtag_api_version api;
LOG_DEBUG("stlink_usb_open");
- h = malloc(sizeof(struct stlink_usb_handle_s));
+ h = calloc(1, sizeof(struct stlink_usb_handle_s));
if (h == 0) {
LOG_DEBUG("malloc failed");
const uint16_t vids[] = { param->vid, 0 };
const uint16_t pids[] = { param->pid, 0 };
+ const char *serial = param->serial;
- LOG_DEBUG("transport: %d vid: 0x%04x pid: 0x%04x", param->transport,
- param->vid, param->pid);
+ LOG_DEBUG("transport: %d vid: 0x%04x pid: 0x%04x serial: %s",
+ param->transport, param->vid, param->pid,
+ param->serial ? param->serial : "");
- if (jtag_libusb_open(vids, pids, &h->fd) != ERROR_OK) {
- LOG_ERROR("open failed");
- return ERROR_FAIL;
- }
+ /*
+ On certain host USB configurations(e.g. MacBook Air)
+ STLINKv2 dongle seems to have its FW in a funky state if,
+ after plugging it in, you try to use openocd with it more
+ then once (by launching and closing openocd). In cases like
+ that initial attempt to read the FW info via
+ stlink_usb_version will fail and the device has to be reset
+ in order to become operational.
+ */
+ do {
+ if (jtag_libusb_open(vids, pids, serial, &h->fd) != ERROR_OK) {
+ LOG_ERROR("open failed");
+ goto error_open;
+ }
- jtag_libusb_set_configuration(h->fd, 0);
+ jtag_libusb_set_configuration(h->fd, 0);
- if (jtag_libusb_claim_interface(h->fd, 0) != ERROR_OK) {
- LOG_DEBUG("claim interface failed");
- return ERROR_FAIL;
- }
+ if (jtag_libusb_claim_interface(h->fd, 0) != ERROR_OK) {
+ LOG_DEBUG("claim interface failed");
+ goto error_open;
+ }
- /* wrap version for first read */
- switch (param->pid) {
- case 0x3744:
- h->version.stlink = 1;
- break;
- default:
- h->version.stlink = 2;
+ /* RX EP is common for all versions */
+ h->rx_ep = STLINK_RX_EP;
+
+ /* wrap version for first read */
+ switch (param->pid) {
+ case STLINK_V1_PID:
+ h->version.stlink = 1;
+ h->tx_ep = STLINK_TX_EP;
+ h->trace_ep = STLINK_TRACE_EP;
+ break;
+ case STLINK_V2_1_PID:
+ h->version.stlink = 2;
+ h->tx_ep = STLINK_V2_1_TX_EP;
+ h->trace_ep = STLINK_V2_1_TRACE_EP;
+ break;
+ default:
+ /* fall through - we assume V2 to be the default version*/
+ case STLINK_V2_PID:
+ h->version.stlink = 2;
+ h->tx_ep = STLINK_TX_EP;
+ h->trace_ep = STLINK_TRACE_EP;
+ break;
+ }
+
+ /* get the device version */
+ err = stlink_usb_version(h);
+
+ if (err == ERROR_OK) {
break;
- }
+ } else if (h->version.stlink == 1 ||
+ retry_count == 0) {
+ LOG_ERROR("read version failed");
+ goto error_open;
+ } else {
+ err = jtag_libusb_release_interface(h->fd, 0);
+ if (err != ERROR_OK) {
+ LOG_ERROR("release interface failed");
+ goto error_open;
+ }
- /* get the device version */
- err = stlink_usb_version(h);
+ err = jtag_libusb_reset_device(h->fd);
+ if (err != ERROR_OK) {
+ LOG_ERROR("reset device failed");
+ goto error_open;
+ }
- if (err != ERROR_OK) {
- LOG_ERROR("read version failed");
- jtag_libusb_close(h->fd);
- free(h);
- return err;
- }
+ jtag_libusb_close(h->fd);
+ /*
+ Give the device one second to settle down and
+ reenumerate.
+ */
+ usleep(1 * 1000 * 1000);
+ retry_count--;
+ }
+ } while (1);
/* compare usb vid/pid */
if ((param->vid != h->vid) || (param->pid != h->pid))
err = ERROR_OK;
switch (h->transport) {
- case STLINK_TRANSPORT_SWD:
- case STLINK_TRANSPORT_JTAG:
+ case HL_TRANSPORT_SWD:
+ case HL_TRANSPORT_JTAG:
if (h->version.jtag == 0)
err = ERROR_FAIL;
break;
- case STLINK_TRANSPORT_SWIM:
+ case HL_TRANSPORT_SWIM:
if (h->version.swim == 0)
err = ERROR_FAIL;
break;
if (err != ERROR_OK) {
LOG_ERROR("mode (transport) not supported by device");
- jtag_libusb_close(h->fd);
- free(h);
- return err;
+ goto error_open;
}
- /* set the used jtag api */
- h->jtag_api = STLINK_JTAG_API_V1;
+ api = h->version.jtag_api_max;
+
+ LOG_INFO("using stlink api v%d", api);
+
+ /* set the used jtag api, this will default to the newest supported version */
+ h->jtag_api = api;
/* initialize the debug hardware */
- err = stlink_usb_init_mode(h);
+ err = stlink_usb_init_mode(h, param->connect_under_reset);
if (err != ERROR_OK) {
- LOG_ERROR("init mode failed");
- jtag_libusb_close(h->fd);
- free(h);
- return err;
+ LOG_ERROR("init mode failed (unable to connect to the target)");
+ goto error_open;
+ }
+
+ /* clock speed only supported by stlink/v2 and for firmware >= 22 */
+ if (h->version.stlink >= 2 && h->version.jtag >= 22) {
+ LOG_DEBUG("Supported clock speeds are:");
+
+ for (unsigned i = 0; i < ARRAY_SIZE(stlink_khz_to_speed_map); i++)
+ LOG_DEBUG("%d kHz", stlink_khz_to_speed_map[i].speed);
+
+ stlink_speed(h, param->initial_interface_speed, false);
}
+ /* get cpuid, so we can determine the max page size
+ * start with a safe default */
+ h->max_mem_packet = (1 << 10);
+
+ uint8_t buffer[4];
+ err = stlink_usb_read_mem32(h, CPUID, 4, buffer);
+ if (err == ERROR_OK) {
+ uint32_t cpuid = le_to_h_u32(buffer);
+ int i = (cpuid >> 4) & 0xf;
+ if (i == 4 || i == 3) {
+ /* Cortex-M3/M4 has 4096 bytes autoincrement range */
+ h->max_mem_packet = (1 << 12);
+ }
+ }
+
+ LOG_DEBUG("Using TAR autoincrement: %" PRIu32, h->max_mem_packet);
+
*fd = h;
return ERROR_OK;
+
+error_open:
+ stlink_usb_close(h);
+
+ return ERROR_FAIL;
}
-/** */
-static int stlink_usb_close(void *fd)
+int stlink_config_trace(void *handle, bool enabled, enum tpio_pin_protocol pin_protocol,
+ uint32_t port_size, unsigned int *trace_freq)
{
- return ERROR_OK;
+ struct stlink_usb_handle_s *h = handle;
+
+ if (enabled && (h->jtag_api < 2 || pin_protocol != ASYNC_UART)) {
+ LOG_ERROR("The attached ST-LINK version doesn't support this trace mode");
+ return ERROR_FAIL;
+ }
+
+ if (!enabled) {
+ stlink_usb_trace_disable(h);
+ return ERROR_OK;
+ }
+
+ if (*trace_freq > STLINK_TRACE_MAX_HZ) {
+ LOG_ERROR("ST-LINK doesn't support SWO frequency higher than %u",
+ STLINK_TRACE_MAX_HZ);
+ return ERROR_FAIL;
+ }
+
+ stlink_usb_trace_disable(h);
+
+ if (!*trace_freq)
+ *trace_freq = STLINK_TRACE_MAX_HZ;
+ h->trace.source_hz = *trace_freq;
+
+ return stlink_usb_trace_enable(h);
}
/** */
-struct stlink_layout_api_s stlink_usb_layout_api = {
+struct hl_layout_api_s stlink_usb_layout_api = {
/** */
.open = stlink_usb_open,
/** */
/** */
.reset = stlink_usb_reset,
/** */
+ .assert_srst = stlink_usb_assert_srst,
+ /** */
.run = stlink_usb_run,
/** */
.halt = stlink_usb_halt,
/** */
.write_reg = stlink_usb_write_reg,
/** */
- .read_mem8 = stlink_usb_read_mem8,
+ .read_mem = stlink_usb_read_mem,
+ /** */
+ .write_mem = stlink_usb_write_mem,
+ /** */
+ .write_debug_reg = stlink_usb_write_debug_reg,
+ /** */
+ .override_target = stlink_usb_override_target,
/** */
- .write_mem8 = stlink_usb_write_mem8,
+ .speed = stlink_speed,
/** */
- .read_mem32 = stlink_usb_read_mem32,
+ .config_trace = stlink_config_trace,
/** */
- .write_mem32 = stlink_usb_write_mem32,
+ .poll_trace = stlink_usb_trace_read,
};