drivers/sysfsgpio: fix usage messages
[openocd.git] / src / jtag / drivers / sysfsgpio.c
index 5a4651df194b85f9a3e38ba714422b992678085a..90e93f5a664b4cf5d4a284ca0c9d021448269b60 100644 (file)
 /*
  * Helper func to determine if gpio number valid
  *
- * Assume here that there will be less than 1000 gpios on a system
+ * Assume here that there will be less than 10000 gpios on a system
  */
 static int is_gpio_valid(int gpio)
 {
-       return gpio >= 0 && gpio < 1000;
+       return gpio >= 0 && gpio < 10000;
 }
 
 /*
@@ -89,7 +89,7 @@ static int open_write_close(const char *name, const char *valstr)
  */
 static void unexport_sysfs_gpio(int gpio)
 {
-       char gpiostr[4];
+       char gpiostr[5];
 
        if (!is_gpio_valid(gpio))
                return;
@@ -113,7 +113,7 @@ static void unexport_sysfs_gpio(int gpio)
 static int setup_sysfs_gpio(int gpio, int is_output, int init_high)
 {
        char buf[40];
-       char gpiostr[4];
+       char gpiostr[5];
        int ret;
 
        if (!is_gpio_valid(gpio))
@@ -457,62 +457,70 @@ static const struct command_registration sysfsgpio_command_handlers[] = {
                .handler = &sysfsgpio_handle_jtag_gpionums,
                .mode = COMMAND_CONFIG,
                .help = "gpio numbers for tck, tms, tdi, tdo. (in that order)",
-               .usage = "(tck tms tdi tdo)* ",
+               .usage = "[tck tms tdi tdo]",
        },
        {
                .name = "sysfsgpio_tck_num",
                .handler = &sysfsgpio_handle_jtag_gpionum_tck,
                .mode = COMMAND_CONFIG,
                .help = "gpio number for tck.",
+               .usage = "[tck]",
        },
        {
                .name = "sysfsgpio_tms_num",
                .handler = &sysfsgpio_handle_jtag_gpionum_tms,
                .mode = COMMAND_CONFIG,
                .help = "gpio number for tms.",
+               .usage = "[tms]",
        },
        {
                .name = "sysfsgpio_tdo_num",
                .handler = &sysfsgpio_handle_jtag_gpionum_tdo,
                .mode = COMMAND_CONFIG,
                .help = "gpio number for tdo.",
+               .usage = "[tdo]",
        },
        {
                .name = "sysfsgpio_tdi_num",
                .handler = &sysfsgpio_handle_jtag_gpionum_tdi,
                .mode = COMMAND_CONFIG,
                .help = "gpio number for tdi.",
+               .usage = "[tdi]",
        },
        {
                .name = "sysfsgpio_srst_num",
                .handler = &sysfsgpio_handle_jtag_gpionum_srst,
                .mode = COMMAND_CONFIG,
                .help = "gpio number for srst.",
+               .usage = "[srst]",
        },
        {
                .name = "sysfsgpio_trst_num",
                .handler = &sysfsgpio_handle_jtag_gpionum_trst,
                .mode = COMMAND_CONFIG,
                .help = "gpio number for trst.",
+               .usage = "[trst]",
        },
        {
                .name = "sysfsgpio_swd_nums",
                .handler = &sysfsgpio_handle_swd_gpionums,
                .mode = COMMAND_CONFIG,
                .help = "gpio numbers for swclk, swdio. (in that order)",
-               .usage = "(swclk swdio)* ",
+               .usage = "[swclk swdio]",
        },
        {
                .name = "sysfsgpio_swclk_num",
                .handler = &sysfsgpio_handle_swd_gpionum_swclk,
                .mode = COMMAND_CONFIG,
                .help = "gpio number for swclk.",
+               .usage = "[swclk]",
        },
        {
                .name = "sysfsgpio_swdio_num",
                .handler = &sysfsgpio_handle_swd_gpionum_swdio,
                .mode = COMMAND_CONFIG,
                .help = "gpio number for swdio.",
+               .usage = "[swdio]",
        },
        COMMAND_REGISTRATION_DONE
 };
@@ -561,6 +569,8 @@ static void cleanup_all_fds(void)
        cleanup_fd(tdo_fd, tdo_gpio);
        cleanup_fd(trst_fd, trst_gpio);
        cleanup_fd(srst_fd, srst_gpio);
+       cleanup_fd(swclk_fd, swclk_gpio);
+       cleanup_fd(swdio_fd, swdio_gpio);
 }
 
 static bool sysfsgpio_jtag_mode_possible(void)

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)