+int olimex_jtag_init(void)
+{
+ u8 buf[3];
+ u32 bytes_written;
+
+ low_output = 0x08;
+ low_direction = 0x1b;
+
+ /* initialize low byte for jtag */
+ buf[0] = 0x80; /* command "set data bits low byte" */
+ buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
+ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
+ DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
+ {
+ ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ nTRST = 0x01;
+ nTRSTnOE = 0x4;
+ nSRST = 0x02;
+ nSRSTnOE = 0x00; /* no output enable for nSRST */
+
+ high_output = 0x0;
+ high_direction = 0x0f;
+
+ if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
+ {
+ high_output |= nTRSTnOE;
+ high_output &= ~nTRST;
+ }
+ else
+ {
+ high_output &= ~nTRSTnOE;
+ high_output |= nTRST;
+ }
+
+ if (jtag_reset_config & RESET_SRST_PUSH_PULL)
+ {
+ ERROR("can't set nSRST to push-pull on the Olimex ARM-USB-OCD");
+ }
+ else
+ {
+ high_output &= ~nSRST;
+ }
+
+ /* turn red LED on */
+ high_output |= 0x08;
+
+ /* initialize high port */
+ buf[0] = 0x82; /* command "set data bits high byte" */
+ buf[1] = high_output; /* value */
+ buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */
+ DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
+ {
+ ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
+int flyswatter_init(void)
+{
+ u8 buf[3];
+ u32 bytes_written;
+
+ low_output = 0x18;
+ low_direction = 0xfb;
+
+ /* initialize low byte for jtag */
+ buf[0] = 0x80; /* command "set data bits low byte" */
+ buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
+ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE[12]=out, n[ST]srst=out */
+ DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
+ {
+ ERROR("couldn't initialize FT2232 with 'flyswatter' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ nTRST = 0x10;
+ nTRSTnOE = 0x0; /* not output enable for nTRST */
+ nSRST = 0x20;
+ nSRSTnOE = 0x00; /* no output enable for nSRST */
+
+ high_output = 0x00;
+ high_direction = 0x0c;
+
+ /* turn red LED1 on, LED2 off */
+ high_output |= 0x08;
+
+ /* initialize high port */
+ buf[0] = 0x82; /* command "set data bits high byte" */
+ buf[1] = high_output; /* value */
+ buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */
+ DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
+ {
+ ERROR("couldn't initialize FT2232 with 'flyswatter' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
+int turtle_init(void)
+{
+ u8 buf[3];
+ u32 bytes_written;
+
+ low_output = 0x08;
+ low_direction = 0x5b;
+
+ /* initialize low byte for jtag */
+ buf[0] = 0x80; /* command "set data bits low byte" */
+ buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
+ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
+ DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
+ {
+ ERROR("couldn't initialize FT2232 with 'turtelizer2' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ nSRST = 0x40;
+
+ high_output = 0x00;
+ high_direction = 0x0C;
+
+ /* initialize high port */
+ buf[0] = 0x82; /* command "set data bits high byte" */
+ buf[1] = high_output;
+ buf[2] = high_direction;
+ DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
+ {
+ ERROR("couldn't initialize FT2232 with 'turtelizer2' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
+int comstick_init(void)
+{
+ u8 buf[3];
+ u32 bytes_written;
+
+ low_output = 0x08;
+ low_direction = 0x0b;
+
+ /* initialize low byte for jtag */
+ buf[0] = 0x80; /* command "set data bits low byte" */
+ buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
+ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
+ DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
+ {
+ ERROR("couldn't initialize FT2232 with 'comstick' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ nTRST = 0x01;
+ nTRSTnOE = 0x00; /* no output enable for nTRST */
+ nSRST = 0x02;
+ nSRSTnOE = 0x00; /* no output enable for nSRST */
+
+ high_output = 0x03;
+ high_direction = 0x03;
+
+ /* initialize high port */
+ buf[0] = 0x82; /* command "set data bits high byte" */
+ buf[1] = high_output;
+ buf[2] = high_direction;
+ DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
+ {
+ ERROR("couldn't initialize FT2232 with 'comstick' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
+int stm32stick_init(void)
+{
+ u8 buf[3];
+ u32 bytes_written;
+
+ low_output = 0x88;
+ low_direction = 0x8b;
+
+ /* initialize low byte for jtag */
+ buf[0] = 0x80; /* command "set data bits low byte" */
+ buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
+ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
+ DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
+ {
+ ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ nTRST = 0x01;
+ nTRSTnOE = 0x00; /* no output enable for nTRST */
+ nSRST = 0x80;
+ nSRSTnOE = 0x00; /* no output enable for nSRST */
+
+ high_output = 0x01;
+ high_direction = 0x03;
+
+ /* initialize high port */
+ buf[0] = 0x82; /* command "set data bits high byte" */
+ buf[1] = high_output;
+ buf[2] = high_direction;
+ DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
+ {
+ ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
+void olimex_jtag_blink(void)
+{
+ /* Olimex ARM-USB-OCD has a LED connected to ACBUS3
+ * ACBUS3 is bit 3 of the GPIOH port
+ */
+ if (high_output & 0x08)
+ {
+ /* set port pin high */
+ high_output &= 0x07;
+ }
+ else
+ {
+ /* set port pin low */
+ high_output |= 0x08;
+ }
+
+ BUFFER_ADD = 0x82;
+ BUFFER_ADD = high_output;
+ BUFFER_ADD = high_direction;
+}
+
+void turtle_jtag_blink(void)
+{
+ /*
+ * Turtelizer2 has two LEDs connected to ACBUS2 and ACBUS3
+ */
+ if (high_output & 0x08)
+ {
+ high_output = 0x04;
+ }
+ else
+ {
+ high_output = 0x08;
+ }
+
+ BUFFER_ADD = 0x82;
+ BUFFER_ADD = high_output;
+ BUFFER_ADD = high_direction;
+}
+
+