drivers: new jtag bitbang driver using sysfs gpio
[openocd.git] / src / jtag / interfaces.c
index 778c4e3f27a3f4c46bc0a0ff826bb8d165b3df2a..19d2fccca6ed5438c8f5bc810d8298c003bfd864 100644 (file)
@@ -27,6 +27,7 @@
  *   Free Software Foundation, Inc.,                                       *
  *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
  ***************************************************************************/
+
 #ifdef HAVE_CONFIG_H
 #include "config.h"
 #endif
  */
 
 #if BUILD_ZY1000 == 1
-extern jtag_interface_t zy1000_interface;
+extern struct jtag_interface zy1000_interface;
 #elif defined(BUILD_MINIDRIVER_DUMMY)
-extern jtag_interface_t minidummy_interface;
-#else // standard drivers
+extern struct jtag_interface minidummy_interface;
+#else /* standard drivers */
 #if BUILD_PARPORT == 1
-extern jtag_interface_t parport_interface;
+extern struct jtag_interface parport_interface;
 #endif
 #if BUILD_DUMMY == 1
-extern jtag_interface_t dummy_interface;
+extern struct jtag_interface dummy_interface;
 #endif
 #if BUILD_FT2232_FTD2XX == 1
-extern jtag_interface_t ft2232_interface;
+extern struct jtag_interface ft2232_interface;
 #endif
 #if BUILD_FT2232_LIBFTDI == 1
-extern jtag_interface_t ft2232_interface;
+extern struct jtag_interface ft2232_interface;
+#endif
+#if BUILD_FTDI == 1
+extern struct jtag_interface ftdi_interface;
+#endif
+#if BUILD_USB_BLASTER_LIBFTDI == 1 || BUILD_USB_BLASTER_FTD2XX == 1
+extern struct jtag_interface usb_blaster_interface;
 #endif
 #if BUILD_AMTJTAGACCEL == 1
-extern jtag_interface_t amt_jtagaccel_interface;
+extern struct jtag_interface amt_jtagaccel_interface;
 #endif
 #if BUILD_EP93XX == 1
-extern jtag_interface_t ep93xx_interface;
+extern struct jtag_interface ep93xx_interface;
 #endif
 #if BUILD_AT91RM9200 == 1
-extern jtag_interface_t at91rm9200_interface;
+extern struct jtag_interface at91rm9200_interface;
 #endif
 #if BUILD_GW16012 == 1
-extern jtag_interface_t gw16012_interface;
+extern struct jtag_interface gw16012_interface;
 #endif
 #if BUILD_PRESTO_LIBFTDI == 1 || BUILD_PRESTO_FTD2XX == 1
-extern jtag_interface_t presto_interface;
+extern struct jtag_interface presto_interface;
 #endif
 #if BUILD_USBPROG == 1
-extern jtag_interface_t usbprog_interface;
+extern struct jtag_interface usbprog_interface;
 #endif
 #if BUILD_JLINK == 1
-extern jtag_interface_t jlink_interface;
+extern struct jtag_interface jlink_interface;
 #endif
 #if BUILD_VSLLINK == 1
-extern jtag_interface_t vsllink_interface;
+extern struct jtag_interface vsllink_interface;
 #endif
 #if BUILD_RLINK == 1
-extern jtag_interface_t rlink_interface;
+extern struct jtag_interface rlink_interface;
+#endif
+#if BUILD_ULINK == 1
+extern struct jtag_interface ulink_interface;
 #endif
 #if BUILD_ARMJTAGEW == 1
-extern jtag_interface_t armjtagew_interface;
+extern struct jtag_interface armjtagew_interface;
+#endif
+#if BUILD_BUSPIRATE == 1
+extern struct jtag_interface buspirate_interface;
+#endif
+#if BUILD_REMOTE_BITBANG == 1
+extern struct jtag_interface remote_bitbang_interface;
+#endif
+#if BUILD_STLINK == 1
+extern struct jtag_interface stlink_interface;
+#endif
+#if BUILD_OSBDM == 1
+extern struct jtag_interface osbdm_interface;
+#endif
+#if BUILD_OPENDOUS == 1
+extern struct jtag_interface opendous_interface;
+#endif
+#if BUILD_SYSFSGPIO == 1
+extern struct jtag_interface sysfsgpio_interface;
 #endif
-#endif // standard drivers
+#endif /* standard drivers */
 
 /**
  * The list of built-in JTAG interfaces, containing entries for those
@@ -97,12 +125,12 @@ extern jtag_interface_t armjtagew_interface;
  * The list should be defined to contain either one minidriver interface
  * or some number of standard driver interfaces, never both.
  */
-jtag_interface_t *jtag_interfaces[] = {
+struct jtag_interface *jtag_interfaces[] = {
 #if BUILD_ZY1000 == 1
                &zy1000_interface,
 #elif defined(BUILD_MINIDRIVER_DUMMY)
                &minidummy_interface,
-#else // standard drivers
+#else /* standard drivers */
 #if BUILD_PARPORT == 1
                &parport_interface,
 #endif
@@ -115,6 +143,12 @@ jtag_interface_t *jtag_interfaces[] = {
 #if BUILD_FT2232_LIBFTDI == 1
                &ft2232_interface,
 #endif
+#if BUILD_FTDI == 1
+               &ftdi_interface,
+#endif
+#if BUILD_USB_BLASTER_LIBFTDI == 1 || BUILD_USB_BLASTER_FTD2XX == 1
+               &usb_blaster_interface,
+#endif
 #if BUILD_AMTJTAGACCEL == 1
                &amt_jtagaccel_interface,
 #endif
@@ -142,14 +176,35 @@ jtag_interface_t *jtag_interfaces[] = {
 #if BUILD_RLINK == 1
                &rlink_interface,
 #endif
+#if BUILD_ULINK == 1
+               &ulink_interface,
+#endif
 #if BUILD_ARMJTAGEW == 1
                &armjtagew_interface,
 #endif
-#endif // standard drivers
+#if BUILD_BUSPIRATE == 1
+               &buspirate_interface,
+#endif
+#if BUILD_REMOTE_BITBANG == 1
+               &remote_bitbang_interface,
+#endif
+#if BUILD_STLINK == 1
+               &stlink_interface,
+#endif
+#if BUILD_OSBDM == 1
+               &osbdm_interface,
+#endif
+#if BUILD_OPENDOUS == 1
+               &opendous_interface,
+#endif
+#if BUILD_SYSFSGPIO == 1
+               &sysfsgpio_interface,
+#endif
+#endif /* standard drivers */
                NULL,
        };
 
 void jtag_interface_modules_load(const char *path)
 {
-       // @todo: implement dynamic module loading for JTAG interface drivers
+       /* @todo: implement dynamic module loading for JTAG interface drivers */
 }

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)